Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 21 Jul 2000 17:58:19 -0400 (EDT)
From:      Asmo <root@scully.gothworld.com>
To:        questions@freebsd.org
Cc:        freebsd-stable@freebsd.org
Subject:   Kernel Build Error (fwd)
Message-ID:  <Pine.BSF.4.21.0007211748510.217-200000@scully.gothworld.com>

next in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
Well, I did another make builworld and installworld, weverything went
well, except when I got to configuring the kernal...again I tried
different options and the same output happened. Any programmers know
anything about this error. I reallyu would like to fix this...It ALWAYS
happens at this "wi" thingie

THanks!

---------- Forwarded message ----------
Date: Fri, 21 Jul 2000 02:41:01 -0400 (EDT)
From: Charlie ROOT <root@scully.gothworld.com>
To: questions@freebsd.org
Subject: Kernel Build Error

Hello all,

I CVSup'ed the 4.0S branch tonight from 4.0R and everything went well, I
then finished up the install and built a kernel. THat installed fine, so
then later on I decided to go back and work it down a bit more. Now I
cannot succed in building a kernel due to the errors I'm getting. As far
as I know nothing has changed. I'd be very grateful if someone can give me
a step in the right direction. Btw I WAS following the guide in
/usr/src/updating but it fails at the first step.

Kernel build error -


===> wi
@ -> /usr/src/sys
machine -> /usr/src/sys/i386/include
perl @/kern/makedevops.pl -h @/kern/device_if.m
perl @/kern/makedevops.pl -h @/kern/bus_if.m
rm -f .depend
mkdep -f .depend -a   -nostdinc -D_KERNEL -DKLD_MODULE -I- -I. -I@
-I@/../include -I/usr/obj/usr/src/i386/usr/include
/usr/src/sys/modules/wi/../../i386/isa/if_wi.c
cc -c -x assembler-with-cpp -DLOCORE -O -Wall -Wredundant-decls
-Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith
-Winline -Wcast-qual  -fformat-extensions -ansi  -nostdinc -I-
-I. -I/usr/src/sys -I/usr/src/sys/../include  -D_KERNEL -include
opt_global.h -elf  -mpreferred-stack-boundary=2
/usr/src/sys/i386/i386/locore.s
/tmp/cck12179.s: Assembler messages:
/tmp/cck12179.s:1745: Error: .space specifies non-absolute value
/tmp/cck12179.s:2505: Error: undefined symbol L0 in operation setting
PTmap
/tmp/cck12179.s:2505: Error: undefined symbol PDRSHIFT in operation
setting PTmap
/tmp/cck12179.s:1713: Error: undefined symbol L0 in operation
/tmp/cck12179.s:1713: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:1714: Error: undefined symbol L0 in operation
/tmp/cck12179.s:1714: Error: undefined symbol PDESIZE in operation
/tmp/cck12179.s:2505: Error: undefined symbol L0 in operation setting
APTmap
/tmp/cck12179.s:2505: Error: undefined symbol PDRSHIFT in operation
setting APTmap
/tmp/cck12179.s:1722: Error: undefined symbol L0 in operation
/tmp/cck12179.s:1722: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:1723: Error: undefined symbol L0 in operation
/tmp/cck12179.s:1723: Error: undefined symbol PDESIZE in operation
/tmp/cck12179.s:1936: Error: undefined symbol UPAGES in operation
/tmp/cck12179.s:1936: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2324: Error: undefined symbol BI_ESYMTAB in operation
/tmp/cck12179.s:2329: Error: undefined symbol BI_SYMTAB in operation
/tmp/cck12179.s:2330: Error: undefined symbol BI_ESYMTAB in operation
/tmp/cck12179.s:2334: Error: undefined symbol BI_KERNEND in operation
/tmp/cck12179.s:2346: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2346: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2350: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2350: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2354: Error: undefined symbol UPAGES in operation
/tmp/cck12179.s:2354: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2354: Error: undefined symbol UPAGES in operation
/tmp/cck12179.s:2354: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2359: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2359: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2362: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2362: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2369: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2369: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2375: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2375: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2430: Error: undefined symbol PAGE_SHIFT in operation
/tmp/cck12179.s:2446: Error: undefined symbol PAGE_SHIFT in operation
/tmp/cck12179.s:2447: Error: undefined symbol PAGE_SHIFT in operation
/tmp/cck12179.s:2474: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:2474: Error: undefined symbol PAGE_SIZE in operation
/tmp/cck12179.s:1862: Error: Subtraction of two symbols in different
sections ".tmpstk" {.data section} - "KERNBASE" {*UND* section} at file
address 28.
/tmp/cck12179.s:1885: Error: Subtraction of two symbols in different
sections "end" {*UND* section} - "KERNBASE" {*UND* section} at file
address 38.
/tmp/cck12179.s:1886: Error: Subtraction of two symbols in different
sections "edata" {*UND* section} - "KERNBASE" {*UND* section} at file
address 43.
/tmp/cck12179.s:1898: Error: Subtraction of two symbols in different
sections "cpu_feature" {.data section} - "KERNBASE" {*UND* section} at
file address 61.
/tmp/cck12179.s:1914: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 81.
/tmp/cck12179.s:2123: Error: Subtraction of two symbols in different
sections "kernelname" {*UND* section} - "KERNBASE" {*UND* section} at file
address 371.
/tmp/cck12179.s:2151: Error: Subtraction of two symbols in different
sections "bootinfo" {.data section} - "KERNBASE" {*UND* section} at file
address 411.
/tmp/cck12179.s:2171: Error: Subtraction of two symbols in different
sections "boothowto" {*UND* section} - "KERNBASE" {*UND* section} at file
address 435.
/tmp/cck12179.s:2173: Error: Subtraction of two symbols in different
sections "bootdev" {*UND* section} - "KERNBASE" {*UND* section} at file
address 443.
/tmp/cck12179.s:2211: Error: Subtraction of two symbols in different
sections "cpu" {.data section} - "KERNBASE" {*UND* section} at file
address 495.
/tmp/cck12179.s:2216: Error: Subtraction of two symbols in different
sections "cpu" {.data section} - "KERNBASE" {*UND* section} at file
address 511.
/tmp/cck12179.s:2217: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 521.
/tmp/cck12179.s:2218: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 531.
/tmp/cck12179.s:2219: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 541.
/tmp/cck12179.s:2220: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 551.
/tmp/cck12179.s:2239: Error: Subtraction of two symbols in different
sections "cpu" {.data section} - "KERNBASE" {*UND* section} at file
address 592.
/tmp/cck12179.s:2266: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 627.
/tmp/cck12179.s:2267: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 637.
/tmp/cck12179.s:2268: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 647.
/tmp/cck12179.s:2274: Error: Subtraction of two symbols in different
sections "cpu_high" {.data section} - "KERNBASE" {*UND* section} at file
address 662.
/tmp/cck12179.s:2275: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 668.
/tmp/cck12179.s:2276: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 674.
/tmp/cck12179.s:2277: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 680.
/tmp/cck12179.s:2278: Error: Subtraction of two symbols in different
sections "cpu_vendor" {.data section} - "KERNBASE" {*UND* section} at file
address 686.
/tmp/cck12179.s:2282: Error: Subtraction of two symbols in different
sections "cpu_id" {.data section} - "KERNBASE" {*UND* section} at file
address 699.
/tmp/cck12179.s:2283: Error: Subtraction of two symbols in different
sections "cpu_feature" {.data section} - "KERNBASE" {*UND* section} at
file address 705.
/tmp/cck12179.s:2290: Error: Subtraction of two symbols in different
sections "cpu" {.data section} - "KERNBASE" {*UND* section} at file
address 722.
/tmp/cck12179.s:2296: Error: Subtraction of two symbols in different
sections "cpu" {.data section} - "KERNBASE" {*UND* section} at file
address 739.
/tmp/cck12179.s:2300: Error: Subtraction of two symbols in different
sections "cpu" {.data section} - "KERNBASE" {*UND* section} at file
address 751.
/tmp/cck12179.s:2313: Error: Subtraction of two symbols in different
sections "cpu_feature" {.data section} - "KERNBASE" {*UND* section} at
file address 762.
/tmp/cck12179.s:2321: Error: Subtraction of two symbols in different
sections "end" {*UND* section} - "KERNBASE" {*UND* section} at file
address 784.
/tmp/cck12179.s:2324: Error: Negative of non-absolute symbol KERNBASE
/tmp/cck12179.s:2329: Error: Negative of non-absolute symbol KERNBASE
/tmp/cck12179.s:2330: Error: Negative of non-absolute symbol KERNBASE
/tmp/cck12179.s:2334: Error: Negative of non-absolute symbol KERNBASE
/tmp/cck12179.s:2342: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 843.
/tmp/cck12179.s:2343: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 849.
/tmp/cck12179.s:2346: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 855.
/tmp/cck12179.s:2346: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 867.
/tmp/cck12179.s:2347: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 885.
/tmp/cck12179.s:2350: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 891.
/tmp/cck12179.s:2350: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 903.
/tmp/cck12179.s:2351: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 921.
/tmp/cck12179.s:2354: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 927.
/tmp/cck12179.s:2354: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 939.
/tmp/cck12179.s:2355: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 957.
/tmp/cck12179.s:2357: Error: Subtraction of two symbols in different
sections "proc0paddr" {.data section} - "KERNBASE" {*UND* section} at file
address 969.
/tmp/cck12179.s:2359: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 975.
/tmp/cck12179.s:2359: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 987.
/tmp/cck12179.s:2360: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1005.
/tmp/cck12179.s:2362: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1011.
/tmp/cck12179.s:2362: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1023.
/tmp/cck12179.s:2363: Error: Subtraction of two symbols in different
sections "vm86pa" {.data section} - "KERNBASE" {*UND* section} at file
address 1041.
/tmp/cck12179.s:2365: Error: Subtraction of two symbols in different
sections "vm86paddr" {.data section} - "KERNBASE" {*UND* section} at file
address 1053.
/tmp/cck12179.s:2369: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1059.
/tmp/cck12179.s:2369: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1071.
/tmp/cck12179.s:2370: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1089.
/tmp/cck12179.s:2372: Error: Subtraction of two symbols in different
sections "cpu0prvpage" {.data section} - "KERNBASE" {*UND* section} at
file address 1101.
/tmp/cck12179.s:2375: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1107.
/tmp/cck12179.s:2375: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1119.
/tmp/cck12179.s:2376: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1137.
/tmp/cck12179.s:2378: Error: Subtraction of two symbols in different
sections "SMPpt" {.data section} - "KERNBASE" {*UND* section} at file
address 1149.
/tmp/cck12179.s:2396: Error: Subtraction of two symbols in different
sections "etext" {*UND* section} - "KERNBASE" {*UND* section} at file
address 1158.
/tmp/cck12179.s:2399: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1181.
/tmp/cck12179.s:2402: Error: Subtraction of two symbols in different
sections "etext" {*UND* section} - "KERNBASE" {*UND* section} at file
address 1203.
/tmp/cck12179.s:2413: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1224.
/tmp/cck12179.s:2416: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1243.
/tmp/cck12179.s:2419: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 1265.
/tmp/cck12179.s:2421: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1284.
/tmp/cck12179.s:2424: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1307.
/tmp/cck12179.s:2426: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1326.
/tmp/cck12179.s:2431: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1368.
/tmp/cck12179.s:2434: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1391.
/tmp/cck12179.s:2436: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1410.
/tmp/cck12179.s:2442: Error: Subtraction of two symbols in different
sections "vm86pa" {.data section} - "KERNBASE" {*UND* section} at file
address 1452.
/tmp/cck12179.s:2448: Error: Subtraction of two symbols in different
sections "vm86pa" {.data section} - "KERNBASE" {*UND* section} at file
address 1494.
/tmp/cck12179.s:2452: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1517.
/tmp/cck12179.s:2454: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1536.
/tmp/cck12179.s:2457: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1559.
/tmp/cck12179.s:2459: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1578.
/tmp/cck12179.s:2462: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1601.
/tmp/cck12179.s:2465: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1620.
/tmp/cck12179.s:2468: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1643.
/tmp/cck12179.s:2471: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 1662.
/tmp/cck12179.s:2474: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1686.
/tmp/cck12179.s:2474: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1698.
/tmp/cck12179.s:2478: Error: Subtraction of two symbols in different
sections ".data" {.data section} - "KERNBASE" {*UND* section} at file
address 1731.
/tmp/cck12179.s:2481: Error: Subtraction of two symbols in different
sections "mp_lock" {*UND* section} - "KERNBASE" {*UND* section} at file
address 1755.
/tmp/cck12179.s:2485: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1764.
/tmp/cck12179.s:2488: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 1780.
/tmp/cck12179.s:2491: Error: Subtraction of two symbols in different
sections "KPTphys" {.data section} - "KERNBASE" {*UND* section} at file
address 1803.
/tmp/cck12179.s:2494: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 1822.
/tmp/cck12179.s:2497: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 1845.
/tmp/cck12179.s:2500: Error: Subtraction of two symbols in different
sections "IdlePTD" {.data section} - "KERNBASE" {*UND* section} at file
address 1864.
*** Error code 1

Stop in /usr/obj/usr/src/sys/RIVET.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

Sorry it was so long, I want to make sure you all see the whole thing. I
can be reached at asmo@bck.org I will aslo be monitoring the mailing list
fromw www.freebsd.org.

Thanks so much! 

Justin

P.S. I have attached my kernal config.

[-- Attachment #2 --]
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.8 2000/07/20 02:51:02 msmith Exp $

machine		i386
#cpu		I386_CPU
#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		SCULLY
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

#options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
#options 	MFS			#Memory Filesystem
#options 	MD_ROOT			#MD is a potential root device
#options 	NFS			#Network Filesystem
#options 	NFS_ROOT		#NFS usable as root device, NFS required
#options 	MSDOSFS			#MSDOS Filesystem
#options 	CD9660			#ISO 9660 Filesystem
#options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
#options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
#options 	UCONSOLE		#Allow users to grab the console
#options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
#options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# To make an SMP kernel, the next two are needed
options 	SMP			# Symmetric MultiProcessor Kernel
options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
options 	NCPU=2			# number of CPUs
options 	NBUS=4			# number of busses
options 	NAPIC=1			# number of IO APICs
options 	NINTR=24		# number of INTs

device		isa
#device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
#device		fd1	at fdc0 drive 1

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering
options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
#device		ahc		# AHA2940 and onboard AIC7xxx devices
#device		amd		# AMD 53C974 (Teckram DC-390(T))
#device		dpt		# DPT Smartcache - See LINT for options!
#device		isp		# Qlogic family
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets)
#options		SYM_SETUP_LP_PROBE_MAP=0x40
				# Allow ncr to attach legacy NCR devices when 
				# both sym and ncr are configured

#device		adv0	at isa?
#device		adw
#device		bt0	at isa?
#device		aha0	at isa?
#device		aic0	at isa?

# SCSI peripherals
#device		scbus		# SCSI bus (required)
#device		da		# Direct Access (disks)
#device		sa		# Sequential Access (tape etc)
#device		cd		# CD
#device		pass		# Passthrough device (direct SCSI access)

# RAID controllers
#device		ida		# Compaq Smart RAID
#device		amr		# AMI MegaRAID
#device		mlx		# Mylex DAC960 family
#device		twe		# 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
#device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
#pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
#device		apm0    at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 10 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 11 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
#device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
#device		de		# DEC/Intel DC21x4x (``Tulip'')
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		tx		# SMC 9432TX (83c170 ``EPIC'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
device		miibus		# MII bus support
#device		dc		# DEC/Intel 21143 and various workalikes
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
#device		ex
#device		ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device		an
# Xircom Ethernet
#device		xe
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		fe0	at isa? port 0x300
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300
#device		sn0	at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	1	# Kernel SLIP
#pseudo-device	ppp	1	# Kernel PPP
#pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
#pseudo-device	md		# Memory "disks"
#pseudo-device	gif	4	# IPv6 and IPv4 tunneling
#pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
#pseudo-device	bpf		#Berkeley packet filter

# USB support
#device		uhci		# UHCI PCI->USB interface
#device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
#device		ugen		# Generic
#device		uhid		# "Human Interface Devices"
#device		ukbd		# Keyboard
#device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0007211748510.217-200000>