Date: Wed, 2 May 2001 16:54:14 -0400 From: "Brad L. Chisholm" <blc@bsdwins.com> To: freebsd-questions@FreeBSD.org Subject: Optimal setup for large raid? Message-ID: <20010502165413.B9113@bsdone.bsdwins.com>
next in thread | raw e-mail | index | archive | help
We are planning to create a large software raid volume,
and I am interested in input about what might make the
best configuration.
We have 52 identical 9Gb drives (Seagate ST19171W) spread
across 4 SCSI controllers (Adaptec AHA 2944UW), with 13
drives per controller. We want fault-tolerance, but cannot
afford to "waste" 50% of our space for a mirrored (raid1)
configuration. Thus, we are considering some sort of
raid5 setup using vinum (possibly in combination with ccd).
We are running FreeBSD 4.3-RELEASE, on a 550Mz P3 with
384Mb of memory.
Possible configurations:
Configuration #1: A single raid5 vinum volume consisting of all 52 drives.
Questions:
A) Is there a performance penalty for this many drives in
a raid5 array?
B) Should the plex be configured with sequential drives on
different controllers? (i.e. if drives 1-13 are on controller 1,
14-27 on controller 2, 27-39 on controller 3, and 40-52 on
controller 4, should the drive ordering be:
1,14,27,40,2,15,28,41,...
or 1,2,3,4,5,6,7,8,...
Configuration #2: Multiple raid5 vinum volumes (perhaps 1 per controller),
combined into a single volume by striping the raid5
volumes. (Basically a "raid50" setup.)
Questions:
A) Is this possible with vinum? From the documentation, it didn't
appear to be, so we were considering using 'ccd' to stripe the
raid5 volumes together.
B) Would this perform better, worse, or about the same as #1?
Any other configurations that might prove superior?
The final volume will be used as an online backup area, and will contain
a relatively few, large tar files. Write performance will likely be
more important that read, although I realize using raid5 will impact
write performance.
Any suggestions on what might be the best stripe size to use?
Thanks in advance for any suggestions you might have.
-Brad
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010502165413.B9113>