Date: Thu, 28 May 2020 21:49:29 +0400 From: Igor Pokrovsky <ip@unixway.org> To: Alexey Dokuchaev <danfe@nsu.ru> Cc: x11@freebsd.org Subject: Re: xf86-video-ati-legacy port status Message-ID: <20200528174929.GA873@doom.homeunix.org> In-Reply-To: <20200528070618.GA61570@regency.nsu.ru> References: <20200527172918.GA874@doom.homeunix.org> <20200528070618.GA61570@regency.nsu.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, May 28, 2020 at 02:06:18PM +0700, Alexey Dokuchaev wrote: > On Wed, May 27, 2020 at 09:29:18PM +0400, Igor Pokrovsky wrote: > It's on my radar (I'm happily using it right now with xorg-server-1.18.4 > and drm-legacy-kmod-g20190213, so it would be nice to unbreak it against > new xorg-server), but somewhat low-priority. May I ask what does not > work for you with xf86-video-ati-19.1.0? I haven't heard of regressions > other than invisible HW mouse pointer but that had been fixed in April. With xf86-video-ati-19.1.0 I'm getting the following error in Xorg log: (EE) RADEON(0): Failed to enable any CRTC Here are some DRM related messages from kernel: info: [drm] Initialized drm 1.1.0 20060810 drmn0: <ATI Radeon HD3850> on vgapci0 info: [drm] RADEON_IS_AGP info: [drm] initializing kernel modesetting (RV670 0x1002:0x9515 0x174B:0x0028). info: [drm] register mmio base: 0xFBF00000 info: [drm] register mmio size: 65536 info: [drm] radeon_atrm_get_bios: ===> Try ATRM... info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=9515 info: [drm] radeon_atrm_get_bios: Get ACPI device handle info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT... info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM... info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000 info: [drm] igp_read_bios_from_vram: Map address: 0x1ec55000 (262144 bytes) info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000 info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM... info: [drm] radeon_read_bios: Map address: 0x4c0000 (131072 bytes) info: [drm] ATOM BIOS: drmn0: info: GTT: 64M 0xDC000000 - 0xDFFFFFFF drmn0: info: VRAM: 512M 0xBC000000 - 0xDBFFFFFF (512M used) info: [drm] Detected VRAM RAM=512M, BAR=256M info: [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 1029704 kiB [TTM] Initializing pool allocator info: [drm] radeon: 512M of VRAM memory ready info: [drm] radeon: 64M of GTT memory ready. info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. info: [drm] radeon: irq initialized. info: [drm] GART: num cpu pages 16384, num gpu pages 16384 info: [drm] Loading RV670 Microcode radeon/RV670_pfp.bin: could not load firmware image, error 2 radeon/RV670_pfp.bin: could not load firmware image, error 2 drmn0: Successfully loaded firmware image with name (mapped name): radeon/RV670_pfp.bin (radeon_RV670_pfp_bin) radeon/RV670_me.bin: could not load firmware image, error 2 radeon/RV670_me.bin: could not load firmware image, error 2 drmn0: Successfully loaded firmware image with name (mapped name): radeon/RV670_me.bin (radeon_RV670_me_bin) radeon/R600_rlc.bin: could not load firmware image, error 2 radeon/R600_rlc.bin: could not load firmware image, error 2 drmn0: Successfully loaded firmware image with name (mapped name): radeon/R600_rlc.bin (radeon_R600_rlc_bin) drmn0: info: WB disabled drmn0: info: fence driver on ring 0 use gpu addr 0x00000000dc000004 and cpu addr 0x0x77ff004 drmn0: info: fence driver on ring 3 use gpu addr 0x00000000dc000c0c and cpu addr 0x0x77ffc0c info: [drm] ring test on 0 succeeded in 1 usecs info: [drm] ring test on 3 succeeded in 1 usecs info: [drm] ib test on ring 0 succeeded in 0 usecs info: [drm] ib test on ring 3 succeeded in 1 usecs info: [drm] radeon_device_init: Taking over the fictitious range 0xe0000000-0xf0000000 info: [drm] radeon_device_init: Taking over the fictitious range 0xdc000000-0xe0000000 radeon_iicbb0 on drmn0 iicbus0: <Philips I2C bus> on iicbb0 addr 0x0 iic0: <I2C generic I/O> on iicbus0 iicsmb0: <SMBus over I2C bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus generic I/O> on smbus0 radeon_iicbb1 on drmn0 iicbus1: <Philips I2C bus> on iicbb1 addr 0x20 iic1: <I2C generic I/O> on iicbus1 iicsmb1: <SMBus over I2C bridge> on iicbus1 smbus1: <System Management Bus> on iicsmb1 smb1: <SMBus generic I/O> on smbus1 radeon_iicbb2 on drmn0 iicbus2: <Philips I2C bus> on iicbb2 addr 0x20 iic2: <I2C generic I/O> on iicbus2 iicsmb2: <SMBus over I2C bridge> on iicbus2 smbus2: <System Management Bus> on iicsmb2 smb2: <SMBus generic I/O> on smbus2 radeon_iicbb3 on drmn0 iicbus3: <Philips I2C bus> on iicbb3 addr 0x20 iic3: <I2C generic I/O> on iicbus3 iicsmb3: <SMBus over I2C bridge> on iicbus3 smbus3: <System Management Bus> on iicsmb3 smb3: <SMBus generic I/O> on smbus3 radeon_iicbb4 on drmn0 iicbus4: <Philips I2C bus> on iicbb4 addr 0x20 iic4: <I2C generic I/O> on iicbus4 iicsmb4: <SMBus over I2C bridge> on iicbus4 smbus4: <System Management Bus> on iicsmb4 smb4: <SMBus generic I/O> on smbus4 info: [drm] Radeon Display Connectors info: [drm] Connector 0: info: [drm] DVI-I-1 info: [drm] HPD1 info: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c info: [drm] Encoders: info: [drm] DFP1: INTERNAL_KLDSCP_TMDS1 info: [drm] CRT2: INTERNAL_KLDSCP_DAC2 info: [drm] Connector 1: info: [drm] DIN-1 info: [drm] Encoders: info: [drm] TV1: INTERNAL_KLDSCP_DAC2 info: [drm] Connector 2: info: [drm] DVI-I-2 info: [drm] HPD2 info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c info: [drm] Encoders: info: [drm] CRT1: INTERNAL_KLDSCP_DAC1 info: [drm] DFP2: INTERNAL_LVTM1 info: [drm] Internal thermal controller with fan control info: [drm] radeon: power management initialized info: [drm] Connector DVI-I-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DVI-I-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DIN-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DIN-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DVI-I-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.DVI-I-2 info: [drm] - kern.vt.fb.default_mode info: [drm] fb mappable at 0xE0062000 info: [drm] vram apper at 0xE0000000 info: [drm] size 1228800 info: [drm] fb depth is 24 info: [drm] pitch is 2560 fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0 drmn0: error: No GEM object associated to handle 0x00000438, can't create framebuffer
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20200528174929.GA873>