Date: Mon, 14 May 2018 22:32:19 +0200 From: Per olof Ljungmark <peo@nethead.se> To: Willem Jan Withagen <wjw@digiware.nl>, "stable@freebsd.org" <stable@freebsd.org> Subject: Re: USB GSM still in trouble after upgrade to 11.1-RELEASE-p10 Message-ID: <011ebf86-ba7f-1bba-29e0-94a9e6d924bd@nethead.se> In-Reply-To: <8342b761-b052-4cc9-1bc6-f708d113efd7@digiware.nl> References: <8342b761-b052-4cc9-1bc6-f708d113efd7@digiware.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On 05/14/18 16:35, Willem Jan Withagen wrote: > Hi, > > Yesterday evening I upgraded a system to 11.1-RELEASE-p10. > But that sort of upset my GSM-dongle I use for alarming. > > And it did not do that before the upgrade, where I was running -p9. > > > This is what I find repeated at rather high frequency in the logs: > +ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 > +u3g0 on uhub3 > +u3g0: <Data Interface> on usbus1 > +u3g0: Found 2 ports. > +umass0 on uhub3 > +umass0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00, > addr 3> on usbus1 > +umass0: SCSI over Bulk-Only; quirks = 0x0000 > +umass0:3:0: Attached to scbus3 > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Retrying command > +(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > +(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error > +(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > +ugen1.3: <HUAWEI Technologies HUAWEI Mobile> at usbus1 (disconnected) > +u3g0: at uhub3, port 2, addr 3 (disconnected) > +u3g0: detached > +umass0: at uhub3, port 2, addr 3 (disconnected) > +umass0: detached > > So when I get home, I'm going to pull the stick. > But what could be going on here? I have identical behavior on a FreeBSD 11.1-STABLE #0 r330526 system after it was restarted today. It used to work with a Huawei E398 but after the reboot it does not, just like your above. Interestingly, I replaced it with a much older Huawei E1750 and that one worked, but only after I rebooted again. With the E398 after a reboot I only see /dev/cuau1, no cuaUX.X If I pull it and replace with E1750 nothing happens If I reboot with the E1750 in place, I get /dev/cuaUX.X Fishy...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?011ebf86-ba7f-1bba-29e0-94a9e6d924bd>