Date: Thu, 02 Jul 2009 15:02:10 -0400 From: Mike Tancsa <mike@sentex.net> To: Alexander Motin <mav@FreeBSD.org> Cc: FreeBSD-Current <freebsd-current@FreeBSD.org>, scottl@FreeBSD.org Subject: Re: RFC: ATA to CAM integration patch Message-ID: <200907021859.n62IxghN009931@lava.sentex.ca> In-Reply-To: <4A471F44.7010108@FreeBSD.org> References: <4A4517BE.9040504@FreeBSD.org> <200906272303.n5RN3rTi070177@lava.sentex.ca> <4A471F44.7010108@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
At 03:44 AM 6/28/2009, Alexander Motin wrote:
>I see no any relation to the patch here. I would say it is some
>BIOS/loader problem, as kernel wasn't yet booted. Have you been ever
>able to boot this system with AHCI enabled before?
I re-installed the OS on a new drive with a 200906 snapshot, and can
now boot with AHCI enabled in the BIOS. The original image was a
RELENG_7 box that I upgraded to HEAD some time ago. Is there
something that needs to be manually updated that would not have been
done as part of the normal buildworld/buildkernel ? Re-install the
boot blocks perhaps ?
ahci0: <AHCI controller> port
0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb49f
mem 0xfadd6000-0xfadd67ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
On the ich10 board, its trying to boot up now, but I am getting
uhub8: 4 ports with 4 removable, self powered
(probe2:ahcich2:0:0:0): SIGNATURE: eb14
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ahcich2: Timeout on slot 4
run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config
ahcich2: Timeout on slot 5
run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config
ahcich2: Timeout on slot 6
run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config
ahcich2: Timeout on slot 7
run_interrupt_driven_hooks: still waiting after 300 seconds for xpt_config
ahcich2: Timeout on slot 8
ada0 at ahcich1 bus 0 target 0 lun 0
ada0: <ST3500410AS CC34> ATA/ATAPI-8 SATA 2.x device
ada0: 300.000MB/s transfers
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Native Command Queueing Enabled
mountroot> ufs:/dev/ada0s1
Trying to mount root from ufs:/dev/ada0s1
GEOM: ada0s1: geometry does not match label (255h,63s != 16h,63s).
And then it hangs there.
---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200907021859.n62IxghN009931>