Date: Thu, 11 Nov 2004 13:29:20 -0800 (PST) From: Nik Azim Azam <nskyline_r35@yahoo.com> To: Stephan Uphoff <ups@tree.com> Cc: freebsd-current@freebsd.org Subject: Re: number of CPUs and IPI panic Message-ID: <20041111212920.30198.qmail@web54609.mail.yahoo.com> In-Reply-To: <1100113409.49430.69.camel@palm.tree.com>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] this is the output of dmesg -v with the patch applied. --- Stephan Uphoff <ups@tree.com> wrote: > On Wed, 2004-11-10 at 13:23, Nik Azim Azam wrote: > > I'm still getting this panic with the patch: > > > > panic: APIC: Previous IPI is stuck > > cpuid = 3 > > boot() called on cpu#0 > > Uptime: 4m16s > > > > :( > > OK - now we have to play the thousand questions game > ;-) > > This happens after the system is up? > Can you send me the startup messages (With verbose > enabled)? > Are there known issues with other operating systems? > Do you have a serial console / serial line for gdb / > firewire > for debugging ? > > If I read your first posting correctly you have 6 > pentium II overdrive > processors in your system (overdrive = PII with PPRO > pinout). > Can you supply information about the vendor / > chipset of your system? > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com [-- Attachment #2 --] Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Thu Nov 11 21:15:06 UTC 2004 root@beast.nik.net:/usr/src/sys/i386/compile/BEAST Preloaded elf kernel "/boot/kernel/kernel" at 0xc074c000. MP Configuration Table version 1.4 found at 0xc009fd50 APIC: Using the MPTable enumerator. SMP: Added CPU 6 (BSP) SMP: Added CPU 0 (AP) SMP: Added CPU 1 (AP) SMP: Added CPU 2 (AP) SMP: Added CPU 4 (AP) SMP: Added CPU 5 (AP) MPTable: <UNISYS Revol. 6X6> Calibrating clock(s) ... i8254 clock: 1193149 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 333341943 Hz CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (333.34-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x1632 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 268435456 (256 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000000fb4ffff, 254963712 bytes (62247 pages) avail memory = 257605632 (245 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 APIC ID: physical 2, logical 0:2 APIC ID: physical 4, logical 0:3 APIC ID: physical 5, logical 1:0 APIC ID: physical 6, logical 1:1 FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs cpu0 (BSP): APIC ID: 6 cpu1 (AP): APIC ID: 0 cpu2 (AP): APIC ID: 1 cpu3 (AP): APIC ID: 2 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 bios32: Found BIOS32 Service Directory header at 0xc00fdbd0 bios32: Entry = 0xf7cee (c00f7cee) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf7750+0xa10 pnpbios: Found PnP BIOS data at 0xc00fdbe0 pnpbios: Entry = f0000:6721 Rev = 1.0 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 1 bus EISA ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: high ioapic0: intpin 2 bus EISA ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high ioapic0: intpin 3 bus EISA ioapic0: intpin 3 trigger: edge ioapic0: intpin 3 polarity: high ioapic0: intpin 4 bus EISA ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: high ioapic0: intpin 5 bus EISA ioapic0: intpin 5 trigger: level ioapic0: intpin 5 polarity: high ioapic0: intpin 6 bus EISA ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: high ioapic0: intpin 7 bus EISA ioapic0: intpin 7 trigger: edge ioapic0: intpin 7 polarity: high ioapic0: intpin 8 bus EISA ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: high ioapic0: intpin 9 bus EISA ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high ioapic0: intpin 10 bus EISA ioapic0: intpin 10 trigger: level ioapic0: intpin 10 polarity: high ioapic0: intpin 11 bus EISA ioapic0: intpin 11 trigger: level ioapic0: intpin 11 polarity: high ioapic0: intpin 12 bus EISA ioapic0: intpin 12 trigger: edge ioapic0: intpin 12 polarity: high ioapic0: intpin 13 bus EISA ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: high ioapic0: intpin 14 bus EISA ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: high ioapic0: intpin 15 bus EISA ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: high lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: active-high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: active-high ioapic0 <Version 1.1> irqs 0-15 on motherboard cpu0 BSP: ID: 0x06000000 VER: 0x00040011 LDR: 0x12000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> random: <entropy source, Software, Yarrow> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a0c0 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 2 [class=000000] 3 [class=01018a] 4 5 6 7 8 9 10 11 12 [class=010000] [hdr=80] is there (id=00509005) pcibios: BIOS version 2.10 pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x0482, revid=0x15 bus=0, slot=2, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fcb0, size 4, enabled found-> vendor=0x10ad, dev=0x0105, revid=0x06 bus=0, slot=3, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x28 (10000 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000f800, size 8, enabled map[14]: type 1, range 64, base feaff000, size 12, enabled found-> vendor=0x9005, dev=0x0050, revid=0x00 bus=0, slot=12, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000f400, size 8, enabled map[14]: type 1, range 64, base feafe000, size 12, enabled found-> vendor=0x9005, dev=0x0050, revid=0x00 bus=0, slot=12, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000fcc0, size 6, enabled found-> vendor=0x10b7, dev=0x9050, revid=0x00 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 map[10]: type 3, range 32, base fd000000, size 24, enabled found-> vendor=0x1013, dev=0x00b8, revid=0x00 bus=0, slot=14, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0023, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[10]: type 4, range 32, base 0000fc98, size 3, enabled map[14]: type 4, range 32, base 0000fca8, size 2, enabled map[18]: type 4, range 32, base 0000fca0, size 3, enabled map[1c]: type 4, range 32, base 0000fcac, size 2, enabled map[20]: type 4, range 32, base 0000fc40, size 6, enabled map[24]: type 1, range 32, base feac0000, size 17, enabled found-> vendor=0x105a, dev=0x4d38, revid=0x01 bus=0, slot=15, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 found-> vendor=0x8086, dev=0x84c5, revid=0x05 bus=0, slot=20, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x84c4, revid=0x06 bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x84c4, revid=0x06 bus=0, slot=26, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) eisab0: <PCI-EISA bridge> at device 2.0 on pci0 eisa0: <EISA bus> on eisab0 mainboard0: <UNIa481 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on eisab0 atapci0: <GENERIC ATA controller> port 0xfcb0-0xfcbf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 3.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcb0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ahc0: <Adaptec 3950B Ultra2 SCSI adapter> port 0xf800-0xf8ff mem 0xfeaff000-0xfeafffff irq 11 at device 12.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf800 ahc0: Reading SEEPROM...done. ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 418 instructions downloaded ahc0: Features 0x76f6, Bugs 0x8, Flags 0x20485540 ahc0: [GIANT-LOCKED] aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec 3950B Ultra2 SCSI adapter> port 0xf400-0xf4ff mem 0xfeafe000-0xfeafefff irq 11 at device 12.1 on pci0 ahc1: Defaulting to MEMIO off ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf400 ahc1: Reading SEEPROM...done. ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 418 instructions downloaded ahc1: Features 0x76f6, Bugs 0x8, Flags 0x20485540 ahc1: [GIANT-LOCKED] aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfcc0-0xfcff irq 10 at device 13.0 on pci0 xl0: Reserved 0x40 bytes for rid 0x10 type 4 at 0xfcc0 xl0: using port I/O xl0: media options word: e040 xl0: found MII/AUTO miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:60:08:62:18:91 xl0: [MPSAFE] pci0: <display, VGA> at device 14.0 (no driver attached) atapci1: <Promise PDC20262 UDMA66 controller> port 0xfc40-0xfc7f,0xfcac-0xfcaf,0xfca0-0xfca7,0xfca8-0xfcab,0xfc98-0xfc9f mem 0xfeac0000-0xfeadffff irq 5 at device 15.0 on pci0 atapci1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xfc40 atapci1: [MPSAFE] ata2: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfc98 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfca8 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfca0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfcac ata3: reset tp1 mask=03 ostat0=00 ostat1=00 ata3-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata3-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=00 stat1=00 devices=0x0 ata3: [MPSAFE] pci0: <memory, RAM> at device 20.0 (no driver attached) pcib1: <Intel 82454KX/GX (Orion) host to PCI bridge> pcibus 1 on motherboard pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 64, base fcee0000, size 16, enabled found-> vendor=0x14e4, dev=0x1645, revid=0x15 bus=1, slot=15, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcee0000-0xfceeffff irq 5 at device 15.0 on pci1 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfcee0000 miibus1: <MII bus> on bge0 brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:08:02:ed:60:9b bge0: [MPSAFE] cpu0 on motherboard cpu1 on motherboard cpu2 on motherboard cpu3 on motherboard cpu4 on motherboard cpu5 on motherboard ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 17 devices, largest 138 bytes PNP0c02: adding io range 0x80-0x80, size=0x1, align=0 PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 0 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: adding irq mask 0x10 pnpbios: handle 1 device ID PNP0501 (0105d041) pnpbios: handle 2 device ID PNP0501 (0105d041) pnpbios: handle 3 device ID PNP0401 (0104d041) PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0 PNP0700: adding irq mask 0x40 pnpbios: handle 4 device ID PNP0700 (0007d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 5 device ID PNP0a03 (030ad041) PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0 PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0 pnpbios: handle 6 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 PNP0200: adding dma mask 0x10 pnpbios: handle 7 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: adding irq mask 0x1 pnpbios: handle 9 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: adding irq mask 0x100 pnpbios: handle 10 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: adding irq mask 0x2 pnpbios: handle 11 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: adding irq mask 0x2000 pnpbios: handle 12 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 13 device ID PNP0800 (0008d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 14 device ID PNP0f13 (130fd041) PNP0c02: adding io range 0x48-0x4b, size=0x4, align=0 PNP0c02: adding io range 0x400-0x407, size=0x8, align=0 PNP0c02: adding io range 0x40a-0x40c, size=0x3, align=0 PNP0c02: adding io range 0x410-0x43f, size=0x30, align=0 PNP0c02: adding io range 0x461-0x462, size=0x2, align=0 PNP0c02: adding io range 0x464-0x465, size=0x2, align=0 PNP0c02: adding io range 0x481-0x48b, size=0xb, align=0 PNP0c02: adding io range 0x4c6-0x4c6, size=0x1, align=0 PNP0c02: adding io range 0x4ca-0x4ca, size=0x1, align=0 PNP0c02: adding io range 0x4ce-0x4ce, size=0x1, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0x4d4-0x4d6, size=0x3, align=0 PNP0c02: adding io range 0x4e0-0x4ef, size=0x10, align=0 PNP0c02: adding io range 0x4f4-0x4ff, size=0xc, align=0 PNP0c02: adding io range 0xc80-0xc84, size=0x5, align=0 pnpbios: handle 15 device ID PNP0c02 (020cd041) PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000 PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 pnpbios: handle 16 device ID PNP0c02 (020cd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xcf800-0xd0fff,0xcd800-0xcf7ff,0xc8000-0xcd7ff,0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: [GIANT-LOCKED] bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x4001 0x4011 0x4001 0x4001 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4001 0x4001 0x4001 0x4001 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <16550A-compatible COM port> failed to probe on isa0 unknown: <PNP0401> failed to probe on isa0 unknown: <PNP0700> failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0f13> failed to probe at irq 12 on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 333341943 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: <SONY CD-RW CRX230E/QYS1> CDRW drive at ata0 as master acd0: read 42302KB/s (8958KB/s) write 172KB/s (8958KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata2-master: setting PIO4 on Promise PDC20262 chip ata2-master: setting UDMA66 on Promise PDC20262 chip ad0: <Maxtor 6E040L0/NAR61590> ATA-7 disk at ata2-master ad0: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. GEOM: new disk ad0 ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc1: Selection Timeout on A:0. 0 SCBs aborted ahc0: Selection Timeout on A:4. 0 SCBs aborted ahc1: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc1: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted ahc1: Selection Timeout on A:1. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc1: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc1: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted ahc1: Selection Timeout on A:6. 0 SCBs aborted ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc1: Selection Timeout on A:8. 0 SCBs aborted ahc0: Selection Timeout on A:10. 0 SCBs aborted ahc1: Selection Timeout on A:9. 0 SCBs aborted ahc0: Selection Timeout on A:11. 0 SCBs aborted ahc1: Selection Timeout on A:10. 0 SCBs aborted ahc0: Selection Timeout on A:12. 0 SCBs aborted ahc1: Selection Timeout on A:11. 0 SCBs aborted ahc0: Selection Timeout on A:13. 0 SCBs aborted ahc1: Selection Timeout on A:12. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted ahc1: Selection Timeout on A:13. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 ahc1: Selection Timeout on A:14. 0 SCBs aborted (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period a, offset 7f (ahc0:A:0:0): Received SDTR period a, offset f Filtered to period a, offset f ahc0: target 0 synchronous at 40.0MHz, offset = 0xf ahc1: Selection Timeout on A:15. 0 SCBs aborted da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE SX118202LC B70C> Fixed Direct Access SCSI-2 device da0: Serial Number LK385404 19161EZ6 da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) GEOM: new disk da0 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x04000000 VER: 0x00040011 LDR: 0x08000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x05000000 VER: 0x00040011 LDR: 0x11000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x02000000 VER: 0x00040011 LDR: 0x04000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (EISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (EISA IRQ 4) to cluster 1 ioapic0: routing intpin 5 (EISA IRQ 5) to cluster 1 ioapic0: routing intpin 8 (EISA IRQ 8) to cluster 0 ioapic0: routing intpin 10 (EISA IRQ 10) to cluster 0 ioapic0: routing intpin 11 (EISA IRQ 11) to cluster 1 ioapic0: routing intpin 13 (EISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (EISA IRQ 14) to cluster 1 ioapic0: routing intpin 15 (EISA IRQ 15) to cluster 0 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init bge0: gigabit link uphelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041111212920.30198.qmail>