Date: Fri, 23 Mar 2001 14:35:32 +0000 From: simond@irrelevant.org To: freebsd-mobile@freebsd.org Subject: Problems mounting CF flash card via PCMCIA adaptor Message-ID: <20010323143532.A14604@irrelevant.org>
next in thread | raw e-mail | index | archive | help
Despite successfully using a 16mb flash card in the same adaptor I can't
manage to get a new 64mb Jenoptik one working, I've enclosed a copy of the
dumpcis output for it
/var/log/messages output:
Mar 6 14:53:14 laptop pccardd[9039]: Card "3SYSTEM SSSCF064MAA "("") [] [] has function ID 4
Mar 6 14:53:19 laptop pccardd[9039]: driver allocation failed for (null)((null)): Device not configured
I hope someone has an idea :)
dumpcis output:
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: d9 01 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 250nS, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 03 d9 01 ff
(MWAIT) (3V card)
Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
000: df 01
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 00 00 00 00
PCMCIA ID = 0x0, OEM ID = 0x0
Tuple #5, code = 0x15 (Version 1 info), length = 32
000: 04 01 33 53 59 53 54 45 4d 20 53 53 53 43 46 30
010: 36 34 4d 41 41 20 00 00 00 00 00 00 00 00 00 ff
Version = 4.1, Manuf = [3SYSTEM SSSCF064MAA ], card vers = []
Addit. info = [],[]
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 04 01
Fixed disk card - POST initialize
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 01
Disk interface: IDE
Tuple #8, code = 0x22 (Functional EXT), length = 3
000: 02 0c 0f
Disk features: Silicon, Unique, Single
Sleep, Standby, Idle, Low power,
Tuple #9, code = 0x1a (Configuration map), length = 5
000: 01 03 00 02 0f
Reg len = 2, config register addr = 0x200, last config = 0x3
Registers: XXXX----
Tuple #10, code = 0x1b (Configuration entry), length = 8
000: c0 c0 a1 01 55 08 00 20
Config index = 0x0(default)
Interface byte = 0xc0 (memory) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Memory space length = 0x8
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #11, code = 0x1b (Configuration entry), length = 6
000: 00 01 21 b5 1e 4d
Config index = 0x0
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #12, code = 0x1b (Configuration entry), length = 10
000: c1 41 99 01 55 64 f0 ff ff 20
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse, Shared
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 6
000: 01 01 21 b5 1e 4d
Config index = 0x1
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #14, code = 0x1b (Configuration entry), length = 15
000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20
Config index = 0x2(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x1f0 block length = 0x8
I/O address # 2: block start = 0x3f6 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #15, code = 0x1b (Configuration entry), length = 6
000: 02 01 21 b5 1e 4d
Config index = 0x2
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #16, code = 0x1b (Configuration entry), length = 15
000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20
Config index = 0x3(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x170 block length = 0x8
I/O address # 2: block start = 0x376 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #17, code = 0x1b (Configuration entry), length = 6
000: 03 01 21 b5 1e 4d
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #18, code = 0x14 (No link), length = 0
Tuple #19, code = 0xff (Terminator), length = 0
--
Simon Dick simond@irrelevant.org
"Why do I get this urge to go bowling everytime I see Tux?"
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010323143532.A14604>