Date: Sat, 13 Jul 2002 12:30:29 +0100 From: rik <freebsd-stable@rikrose.net> To: freebsd-stable@freebsd.org Subject: Netgear MA301 Wireless PCI woes Message-ID: <20020713113029.GA7414@spoon.pkl.net>
next in thread | raw e-mail | index | archive | help
Hi all,
After reading the wi man page, and seeing a message from someone else on
the -mobile list saying it worked with 4-STABLE, I bought a Netgear
MA301 and an MA401 to go with it. It doesn't appear to be recognized in
the slightest. The kernel doesn't even recognize it as being present in
the machine.
I just (12:12 UTC+1) cvsuped from cvsup.uk, and built a fresh GENERIC,
to see if that detects the card. No luck.
Dmesg is included below. The unknown card with vendor id 0x1274, device
0x5880 is my sound card. It gets kldloaded later. Just to confirm, I'm
using 4.6-STABLE
---8<--- dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #1: Sat Jul 13 12:21:20 BST 2002
root@bailey.scitech:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM)Processor (1410.21-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 536788992 (524208K bytes)
config> q
avail memory = 517300224 (505176K bytes)
Preloaded elf kernel "kernel" at 0xc04df000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04df09c.
Preloaded elf module "agp.ko" at 0xc04df0ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f13a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5144 graphics accelerator> at 0.0 irq 11
pci0: <NVidia Riva Vanta TNT2 graphics accelerator> at 13.0 irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xe9800000-0xe980007f irq 10 at device 15.0 on pci0
xl0: Ethernet address: 00:01:03:ce:18:e0
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x5880) at 16.0 irq 5
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xb000-0xb00f irq 0 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 5 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xcffff,0xd0000-0xd07ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-master UDMA100
ad1: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-slave UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W1610A> at ata1-master PIO4
acd1: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-116 0122> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s1a
pcm0: <Creative CT5880-C> port 0xb400-0xb43f irq 5 at device 16.0 on pci0
drm0: <ATI Radeon QD> port 0xd800-0xd8ff mem 0xeb000000-0xeb07ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
---8<---
As you can see, there is no mention of the card (yes, it is physically
in the machine). pciconf -l -v also shows up nothing concerning the
card. Anyone have any ideas what could be wrong here?
--
PGP Key: D2729A3F - Keyserver: wwwkeys.uk.pgp.net - rich at rdrose dot org
Key fingerprint = 5EB1 4C63 9FAD D87B 854C 3DED 1408 ED77 D272 9A3F
Public key also encoded with outguess on http://rikrose.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020713113029.GA7414>