Date: Wed, 18 Mar 1998 10:50:53 -0600 From: Gabor Kincses <gabor@acm.org> To: Edwin Culp <eculp@ver1.telmex.net.mx> Cc: hardware@FreeBSD.ORG, hackers@FreeBSD.ORG Subject: Re: Thinkpad and ppbus Message-ID: <350FFB6D.41C67EA6@acm.org> References: <350EE1B8.41C67EA6@acm.org> <350F3053.46225DB5@ver1.telmex.net.mx>
next in thread | previous in thread | raw e-mail | index | archive | help
Edwin Culp wrote: > > Gabor Kincses wrote: > > > > I'm trying to get my parallel port ZIP drive working with the new ppbus > > driver set, but I'm stuck. Here's the relevant portion of dmesg: > > > > ppc0 at 0x3bc irq 7 flags 0x4 on isa > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in EPP mode (EPP 1.9) > > ppi0: <generic parallel i/o> on ppbus 0 > > plip0: <PLIP network interface> on ppbus 0 > > nlpt0: <generic printer> on ppbus 0 > > nlpt0: Interrupt-driven port > > vpo0: <Adaptec aic7110 scsi> on ppbus 0 > > vpo0 waiting for scsi devices to settle > > npx0 flags 0x1 on motherboard > > npx0: INT 16 interface > > > > Could an increased timeout value be necessary for this box (755CX, fall > > 1995)? > > > > Also, after the vpo lines show up, the console goes blank, until > > switching to ttyv1 and back to ttyv0. Then the background is bright > > red. I also had to hack syscons.h to a 37x100 console. > > > > -- > > Gabor Kincses > > (gabor@acm.org) > I don't see the reference to scbus0 something like > > scbus0 at vpo0 bus 0 That is what I was expecting also. But I only get "vpo0 waiting for scsi devices to settle". Then the screen goes blank until a console switch. > > or sd0 something like > > sd0 at scbus0 target 6 lun 0 > sd0 <IOMEGA ZIP 100 J.03> type 0 removable SCSI 2 > > and a couple of other lines about the media. > > are scbus0 and sd0 in your kernel config file? > > controller scbus0 > device sd0 > > in addition to > > controller ppbus0 > controller ppc0 at isa? irq 7 vector ppcintr > controller vpo0 at ppbus? > device nlpt0 AT ppbus? > Unfortunately, I have all that. Thanks, -- Gabor Kincses (gabor@acm.org) FreeBSD 2.2.5-STABLE To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?350FFB6D.41C67EA6>