Date: Sat, 13 Jul 2002 21:43:46 +1000 From: "Gavin Cameron" <gavin@itworks.com.au> To: "rik" <freebsd-stable@rikrose.net>, <freebsd-stable@freebsd.org> Subject: Re: Netgear MA301 Wireless PCI woes Message-ID: <03b901c22a63$1952a250$0202a8c0@dale> References: <20020713113029.GA7414@spoon.pkl.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Rik,
Do you have the 'wi' device in your kernel config file?
A pciconf -l -v tells me
wi0@pci0:18:0: class=0x028000 card=0x41001385 chip=0x41001385 rev=0x02
hdr=0x00
vendor = 'Netgear'
device = '802.11b Wireless Adapter (MA301)'
class = network
I put the following in my kernel config file... I don't know if all the
lines are required but the card works.
# Wireless stuff
device wi
options WLCACHE # enables the signal-strength cache
options WLDEBUG # enables verbose debugging output
#
# PCCARD/PCMCIA
#
# card: pccard slots
# pcic: isa/pccard bridge
device pcic0 at isa?
device pcic1 at isa?
device card
Cheers
Gavin
----- Original Message -----
From: "rik" <freebsd-stable@rikrose.net>
To: <freebsd-stable@freebsd.org>
Sent: Saturday, July 13, 2002 9:30 PM
Subject: Netgear MA301 Wireless PCI woes
> Hi all,
>
> After reading the wi man page, and seeing a message from someone else on
> the -mobile list saying it worked with 4-STABLE, I bought a Netgear
> MA301 and an MA401 to go with it. It doesn't appear to be recognized in
> the slightest. The kernel doesn't even recognize it as being present in
> the machine.
>
> I just (12:12 UTC+1) cvsuped from cvsup.uk, and built a fresh GENERIC,
> to see if that detects the card. No luck.
>
> Dmesg is included below. The unknown card with vendor id 0x1274, device
> 0x5880 is my sound card. It gets kldloaded later. Just to confirm, I'm
> using 4.6-STABLE
>
> ---8<--- dmesg
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.6-STABLE #1: Sat Jul 13 12:21:20 BST 2002
> root@bailey.scitech:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz
> CPU: AMD Athlon(TM)Processor (1410.21-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
>
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
> real memory = 536788992 (524208K bytes)
> config> q
> avail memory = 517300224 (505176K bytes)
> Preloaded elf kernel "kernel" at 0xc04df000.
> Preloaded userconfig_script "/boot/kernel.conf" at 0xc04df09c.
> Preloaded elf module "agp.ko" at 0xc04df0ec.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 10 entries at 0xc00f13a0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
> pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <ATI model 5144 graphics accelerator> at 0.0 irq 11
> pci0: <NVidia Riva Vanta TNT2 graphics accelerator> at 13.0 irq 11
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem
0xe9800000-0xe980007f irq 10 at device 15.0 on pci0
> xl0: Ethernet address: 00:01:03:ce:18:e0
> miibus0: <MII bus> on xl0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pci0: <unknown card> (vendor=0x1274, dev=0x5880) at 16.0 irq 5
> isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on
pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 8233 ATA100 controller> port 0xb000-0xb00f irq 0 at device
17.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 5 at device 17.2
on pci0
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr
2, iclass 3/1
> ums0: 5 buttons and Z dir.
> uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 5 at device 17.3
on pci0
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 5 at device 17.4
on pci0
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> orm0: <Option ROMs> at iomem
0xc0000-0xcafff,0xcc000-0xcffff,0xd0000-0xd07ff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ad0: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-master UDMA100
> ad1: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-slave UDMA100
> acd0: CD-RW <PLEXTOR CD-R PX-W1610A> at ata1-master PIO4
> acd1: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-116 0122> at ata1-slave PIO4
> Mounting root from ufs:/dev/ad1s1a
> pcm0: <Creative CT5880-C> port 0xb400-0xb43f irq 5 at device 16.0 on pci0
> drm0: <ATI Radeon QD> port 0xd800-0xd8ff mem
0xeb000000-0xeb07ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1
> info: [drm] AGP at 0xf8000000 64MB
> info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
> ---8<---
>
> As you can see, there is no mention of the card (yes, it is physically
> in the machine). pciconf -l -v also shows up nothing concerning the
> card. Anyone have any ideas what could be wrong here?
>
> --
> PGP Key: D2729A3F - Keyserver: wwwkeys.uk.pgp.net - rich at rdrose dot org
> Key fingerprint = 5EB1 4C63 9FAD D87B 854C 3DED 1408 ED77 D272 9A3F
> Public key also encoded with outguess on http://rikrose.net
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?03b901c22a63$1952a250$0202a8c0>