Date: Wed, 19 Nov 1997 01:51:19 +0000 From: Gianmarco Giovannelli <gmarco@giovannelli.it> To: mobile@freebsd.org Subject: Please help me on a Sundisk card... Message-ID: <34724617.5AFB15D@giovannelli.it>
index | next in thread | raw e-mail
I am not able to get a SunDisk 15mb compactflash card working...
My lucky experince with a 3com and an usr sportser 1626 is irrepetible
so I need your help...
###############################
Code 128 not found
Code 128 not found
code Unknown ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 4
000: df 72 01 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 7.0 x 100 ns, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 03 d9 01 ff
(MWAIT) (3V card)
Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
000: df 01
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 45 00 01 04
PCMCIA ID = 0x45, OEM ID = 0x401
Tuple #5, code = 0x15 (Version 1 info), length = 23
000: 04 01 53 75 6e 44 69 73 6b 00 53 44 50 00 35 2f
010: 33 20 30 2e 36 00 ff
Version = 4.1, Manuf = [SunDisk],card vers = [SDP]
Addit. info = [5/3 0.6],[ÿ]
Tuple #6, code = 0x0 (Null tuple), length = 3
000: 14 08 00
Tuple #7, code = 0x21 (Functional ID), length = 2
000: 04 01
Fixed disk card - POST initialize
Tuple #8, code = 0x22 (Functional EXT), length = 2
000: 01 01
Modem interface capabilities:
Tuple #9, code = 0x22 (Functional EXT), length = 3
000: 02 0c 0f
Data modem services available:
Tuple #10, code = 0x1a (Configuration map), length = 5
000: 01 07 00 02 0f
Reg len = 2, config register addr = 0x200, last config = 0x7
Registers: XXXX----
Tuple #11, code = 0x1b (Configuration entry), length = 11
000: c0 c0 a1 27 55 4d 5d 75 08 00 21
Config index = 0x0(default)
Interface byte = 0xc0 (memory) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Memory space length = 0x8
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #12, code = 0x1b (Configuration entry), length = 6
000: 00 01 21 b5 1e 4d
Config index = 0x0
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #13, code = 0x1b (Configuration entry), length = 13
000: c1 41 99 27 55 4d 5d 75 64 f0 ff ff 21
Config index = 0x1(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQ level = 4
Max twin cards = 0
Misc attr: (Read-only) (Power down supported) (Ext byte = 0xff)
Tuple #14, code = 0x1b (Configuration entry), length = 6
000: 01 01 21 b5 1e 4d
Config index = 0x1
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #15, code = 0x1b (Configuration entry), length = 18
000: c2 41 99 27 55 4d 5d 75 ea 61 f0 01 07 f6 03 01
010: ee 21
Config index = 0x2(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x1f0 block length = 0x8
I/O address # 2: block start = 0x3f6 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #16, code = 0x1b (Configuration entry), length = 6
000: 02 01 21 b5 1e 4d
Config index = 0x2
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #17, code = 0x1b (Configuration entry), length = 18
000: c3 41 99 27 55 4d 5d 75 ea 61 70 01 07 76 03 01
010: ee 21
Config index = 0x3(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Max current average over 10 ms: 8 x 10mA
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x170 block length = 0x8
I/O address # 2: block start = 0x376 block length = 0x2
IRQ modes: Level, Pulse, Shared
IRQ level = 14
Max twin cards = 1
Misc attr: (Power down supported)
Tuple #18, code = 0x1b (Configuration entry), length = 6
000: 03 01 21 b5 1e 4d
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Max current average over 10 ms: 4.5 x 10mA
Tuple #19, code = 0x1b (Configuration entry), length = 4
000: 07 00 28 d3
Config index = 0x7
Tuple #20, code = 0x14 (No link), length = 0
############################
################## kernel ##
machine "i386"
cpu "I586_CPU"
ident ARTURO
maxusers 10
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options "VM86"
options XSERVER
options ATAPI
options ATAPI_STATIC #Don't do it as an LKM
options KTRACE #Kernel tracing
options SYSVSHM
# ---------------------------------------------- #
config kernel root on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
device wcd0
controller scbus0
device sd0
controller ppbus0
controller ppc0 at isa? port ? irq 7 vector ppcintr
controller vpo0 at ppbus? # Zip Parallelo
device nlpt0 at ppbus? # Stampante
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device apm0 at isa? flags 0x11
# PCCARD (PCMCIA) support
controller card0
device pcic0 at card?
device pcic1 at card?
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? disable port? tty irq 7 vector lptintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
#controller snd0
#device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
#device opl0 at isa? port 0x388 conflicts
#options "SBC_IRQ=5"
device ep0 at isa? port 0x300 net irq 10 vector epintr
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
pseudo-device bpfilter 4
############# end kernel...
This card requires a new hd entry ??? Thanks for any hints and cheats
:-)
--
Regards...
Gianmarco
"Unix expert since yesterday"
http://www2.masternet.it
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34724617.5AFB15D>