Date: Sat, 21 Mar 2009 10:49:14 -0400 From: Mike Tancsa <mike@sentex.net> To: Alexander Motin <mav@mavhome.dp.ua> Cc: freebsd-current@freebsd.org Subject: Re: Intel X58 eSATA port ? Message-ID: <200903211449.n2LEmxwC034905@lava.sentex.ca> In-Reply-To: <49C4B848.1010906@mavhome.dp.ua> References: <1237594983.00089764.1237583401@10.7.7.3> <49C4B848.1010906@mavhome.dp.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
At 05:50 AM 3/21/2009, Alexander Motin wrote:
>Mike Tancsa wrote:
>>Has anyone been able to get this port working ? The BIOS sees the
>>disk, but the driver does not
>
>I would recommend you to start from switching SATA from legacy
>emulation into native AHCI mode in BIOS.
>
>If it does not succeed, try verbose dmesg, it will give some more
>info about drive detection process on AHCI.
Hi,
I turned it on, but still no luck. Attached is the verbose
dmesg.boot. I wonder if the extra controller is being mis-identified
as being PATA ? As far as I can tell, there are no legacy PATA
connectors on the board
Yet
atapci0: <Marvell 88SX6121 UDMA133 controller> port
0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f
mem 0xe1100000-0xe11003ff irq 16 at device 0.0 on pci6
implies its a PATA device ?
---Mike
[-- Attachment #2 --]
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #5: Fri Mar 20 21:17:29 EDT 2009
mdtancsa@i7.sentex.ca:/usr/obj/usr/src/sys/i7
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f1f000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2666776924 Hz
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2666.78-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 8
Logical CPUs per core: 2
Data TLB: 4 KB pages, 4-way set associative, 64 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory = 3212734464 (3063 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x00000000ba01ffff, 3103764480 bytes (757755 pages)
0x00000000bd566000 - 0x00000000bf6bcfff, 34959360 bytes (8535 pages)
0x00000000bf6bf000 - 0x00000000bf718fff, 368640 bytes (90 pages)
0x00000000bf7bf000 - 0x00000000bf7d6fff, 98304 bytes (24 pages)
avail memory = 3137875968 (2992 MB)
Table 'FACP' at 0xbf7fd000
Table 'APIC' at 0xbf7f7000
MADT: Found table at 0xbf7f7000
MP Configuration Table version 1.4 found at 0xc00ff4d0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 1: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 2: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 3: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 4: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 5: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 6: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 7: enabled
SMP: Added CPU 7 (AP)
MADT: Found CPU APIC ID 16 ACPI ID 1: disabled
MADT: Found CPU APIC ID 18 ACPI ID 3: disabled
MADT: Found CPU APIC ID 20 ACPI ID 5: disabled
MADT: Found CPU APIC ID 22 ACPI ID 7: disabled
MADT: Found CPU APIC ID 17 ACPI ID 9: disabled
MADT: Found CPU APIC ID 19 ACPI ID 11: disabled
MADT: Found CPU APIC ID 21 ACPI ID 13: disabled
MADT: Found CPU APIC ID 23 ACPI ID 15: disabled
ACPI APIC Table: <INTEL DX58SO >
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP/HT): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP/HT): APIC ID: 7
pnpbios: Found PnP BIOS data at 0xc00fe0e0
pnpbios: Entry = f0000:aef9 Rev = 1.0
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 4
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 5
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 6
APIC: CPU 6 has ACPI ID 3
APIC: CPU 7 has ACPI ID 7
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP @ 0x0xfe020/0x0024 (v 2 INTEL )
ACPI: XSDT @ 0x0xbf7fe120/0x006C (v 1 INTEL DX58SO 0x0000084F 0x01000013)
ACPI: FACP @ 0x0xbf7fd000/0x00F4 (v 3 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 450/0 [20070320]
ACPI: DSDT @ 0x0xbf7f8000/0x43CE (v 2 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: FACS @ 0x0xbf72b000/0x0040
ACPI: APIC @ 0x0xbf7f7000/0x0138 (v 2 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: WDDT @ 0x0xbf7f6000/0x0040 (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: MCFG @ 0x0xbf7f5000/0x003C (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: ASF! @ 0x0xbf7f4000/0x00AC (v 32 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: SSDT @ 0x0xbf7ea000/0x70AC (v 1 INTEL SSDT PM 0x0000084F MSFT 0x0100000D)
ACPI: DMAR @ 0x0xbf7e7000/0x0128 (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: WDTT @ 0x0xbf7f2000/0x020C (v 1 INTEL DX58SO 0x0000084F MSFT 0x0100000D)
ACPI: ASPT @ 0x0xbf7f3000/0x0034 (v 4 INTEL PerfTune 0x0000084F MSFT 0x0100000D)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: level
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: level
lapic2: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: level
lapic4: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: level
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: level
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: level
lapic3: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: level
lapic5: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: level
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Ignoring local NMI routed to ACPI CPU 9
MADT: Ignoring local NMI routed to ACPI CPU 10
MADT: Ignoring local NMI routed to ACPI CPU 11
MADT: Ignoring local NMI routed to ACPI CPU 12
MADT: Ignoring local NMI routed to ACPI CPU 13
MADT: Ignoring local NMI routed to ACPI CPU 14
MADT: Ignoring local NMI routed to ACPI CPU 15
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
cpu0 BSP:
ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 20 2009 21:17:09)
npx0: INT 16 interface
acpi0: <INTEL DX58SO> on motherboard
PCIe: Memory Mapped configuration base @ 0xf8000000
pcibios: No call entry point
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc5faa000 pa 0x1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PAMX -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.IELK.ELR0 -> bus 0 dev 0 func 0
ACPI timer: 1/2 1/2 1/2 1/2 1/1 1/1 1/2 1/2 1/0 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3405, revid=0x12
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3408, revid=0x12
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340a, revid=0x12
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0140, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x340e, revid=0x12
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0140, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3425, revid=0x12
domain=0, bus=0, slot=16, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3426, revid=0x12
domain=0, bus=0, slot=16, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x342e, revid=0x12
domain=0, bus=0, slot=20, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3422, revid=0x12
domain=0, bus=0, slot=20, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3423, revid=0x12
domain=0, bus=0, slot=20, func=2
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3438, revid=0x12
domain=0, bus=0, slot=20, func=3
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x10cc, revid=0x00
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xe1300000, size 17, enabled
map[14]: type Memory, range 32, base 0xe1323000, size 12, enabled
map[18]: type I/O Port, range 32, base 0x4100, size 5, enabled
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0x40e0, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x40c0, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type I/O Port, range 32, base 0x40a0, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xe1322000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a40, revid=0x00
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a42, revid=0x00
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a48, revid=0x00
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xe1321000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a16, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a22, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x4128, size 3, enabled
map[14]: type I/O Port, range 32, base 0x4134, size 2, enabled
map[18]: type I/O Port, range 32, base 0x4120, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x4130, size 2, enabled
map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled
map[24]: type Memory, range 32, base 0xe1320000, size 11, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type Memory, range 64, base 0xf7f00000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x4000, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xe1200000-0xe12fffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x8086, dev=0x10b9, revid=0x06
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xe1220000, size 17, enabled
pcib1: requested memory range 0xe1220000-0xe123ffff: good
map[14]: type Memory, range 32, base 0xe1200000, size 17, enabled
pcib1: requested memory range 0xe1200000-0xe121ffff: good
map[18]: type I/O Port, range 32, base 0x3000, size 5, enabled
pcib1: requested I/O range 0x3000-0x301f: in range
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x3000-0x301f mem 0xe1220000-0xe123ffff,0xe1200000-0xe121ffff irq 16 at device 0.0 on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe1220000
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
msi: Assigning MSI IRQ 256 to local APIC 0 vector 49
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:15:17:0b:6a:83
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x4100-0x411f mem 0xe1300000-0xe131ffff,0xe1323000-0xe1323fff irq 20 at device 25.0 on pci0
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe1300000
em1: attempting to allocate 1 MSI vectors (1 supported)
em1: using IRQ 257 for MSI
em1: Using MSI interrupt
em1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xe1323000
msi: Assigning MSI IRQ 257 to local APIC 0 vector 50
em1: [FILTER]
em1: bpf attached
em1: Ethernet address: 00:1c:c0:95:0d:0d
uhci0: <UHCI (generic) USB controller> port 0x40e0-0x40ff irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40e0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f10
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x40c0-0x40df irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40c0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 52
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f10
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x40a0-0x40bf irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40a0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f10
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe1322000-0xe13223ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe1322000
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x2000-0x2fff
pcib6: memory decode 0xe1100000-0xe11fffff
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
found-> vendor=0x11ab, dev=0x6121, revid=0xb2
domain=0, bus=6, slot=0, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x2018, size 3, enabled
pcib6: requested I/O range 0x2018-0x201f: in range
map[14]: type I/O Port, range 32, base 0x2024, size 2, enabled
pcib6: requested I/O range 0x2024-0x2027: in range
map[18]: type I/O Port, range 32, base 0x2010, size 3, enabled
pcib6: requested I/O range 0x2010-0x2017: in range
map[1c]: type I/O Port, range 32, base 0x2020, size 2, enabled
pcib6: requested I/O range 0x2020-0x2023: in range
map[20]: type I/O Port, range 32, base 0x2000, size 4, enabled
pcib6: requested I/O range 0x2000-0x200f: in range
map[24]: type Memory, range 32, base 0xe1100000, size 10, enabled
pcib6: requested memory range 0xe1100000-0xe11003ff: good
pcib6: matched entry for 6.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 16
atapci0: <Marvell 88SX6121 UDMA133 controller> port 0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem 0xe1100000-0xe11003ff irq 16 at device 0.0 on pci6
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x2018
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x2024
ata2: reset tp1 mask=03 ostat0=60 ostat1=70
ata2: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata2: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata2: reset tp2 stat0=20 stat1=30 devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f10
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0x4060-0x407f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x0f10
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0x4040-0x405f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x0f10
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe1321000-0xe13213ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe1321000
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0x1000-0x1fff
pcib7: memory decode 0xe0000000-0xe10fffff
pcib7: no prefetched decode
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found-> vendor=0x1002, dev=0x474d, revid=0x65
domain=0, bus=7, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xe0000000, size 24, enabled
pcib7: requested memory range 0xe0000000-0xe0ffffff: good
map[14]: type I/O Port, range 32, base 0x1000, size 8, enabled
pcib7: requested I/O range 0x1000-0x10ff: in range
map[18]: type Memory, range 32, base 0xe1005000, size 12, enabled
pcib7: requested memory range 0xe1005000-0xe1005fff: good
pcib7: matched entry for 7.2.INTA
pcib7: slot 2 INTA hardwired to IRQ 18
found-> vendor=0x104c, dev=0x8023, revid=0x00
domain=0, bus=7, slot=3, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xe1004000, size 11, enabled
pcib7: requested memory range 0xe1004000-0xe10047ff: good
map[14]: type Memory, range 32, base 0xe1000000, size 14, enabled
pcib7: requested memory range 0xe1000000-0xe1003fff: good
pcib7: matched entry for 7.3.INTA
pcib7: slot 3 INTA hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xe0000000-0xe0ffffff,0xe1005000-0xe1005fff irq 18 at device 2.0 on pci7
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe1004000-0xe10047ff,0xe1000000-0xe1003fff irq 19 at device 3.0 on pci7
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe1004000
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:40:2c:70
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xbf69c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:40:2c:70
fwe0: bpf attached
fwe0: Ethernet address: 02:90:27:40:2c:70
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:90:27:00:02:40:2c:70 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port 0x4128-0x412f,0x4134-0x4137,0x4120-0x4127,0x4130-0x4133,0x4020-0x403f mem 0xe1320000-0xe13207ff irq 19 at device 31.2 on pci0
atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xe1320000
atapci1: AHCI called from vendor specific driver
atapci1: AHCI Version 01.20 controller with 6 ports PM not supported
ata3: <ATA channel 0> on atapci1
ata3: AHCI reset...
ata3: SATA connect status=00000000
ata3: AHCI reset done: phy reset found no device
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: AHCI reset...
ata4: SATA connect time=0ms
ata4: ready wait time=0ms
ata4: software reset port 0...
ata4: ready wait time=0ms
ata4: SIGNATURE: 00000101
ata4: AHCI reset done: devices=00000001
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 2> on atapci1
ata5: AHCI reset...
ata5: SATA connect status=00000000
ata5: AHCI reset done: phy reset found no device
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 3> on atapci1
ata6: AHCI reset...
ata6: SATA connect status=00000000
ata6: AHCI reset done: phy reset found no device
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 4> on atapci1
ata7: AHCI reset...
ata7: SATA connect status=00000000
ata7: AHCI reset done: phy reset found no device
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 5> on atapci1
ata8: AHCI reset...
ata8: SATA connect status=00000000
ata8: AHCI reset done: phy reset found no device
ata8: [MPSAFE]
ata8: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (19, 20)
est0: Invalid freq 2527, ignored.
est0: Invalid id16 (set, cur) = (18, 20)
est0: Invalid freq 2394, ignored.
est0: Invalid id16 (set, cur) = (17, 20)
est0: Invalid freq 2261, ignored.
est0: Invalid id16 (set, cur) = (16, 20)
est0: Invalid freq 2128, ignored.
est0: Invalid id16 (set, cur) = (15, 20)
est0: Invalid freq 1995, ignored.
est0: Invalid id16 (set, cur) = (14, 20)
est0: Invalid freq 1862, ignored.
est0: Invalid id16 (set, cur) = (13, 20)
est0: Invalid freq 1729, ignored.
est0: Invalid id16 (set, cur) = (12, 20)
est0: Invalid freq 1596, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (19, 20)
est1: Invalid freq 2527, ignored.
est1: Invalid id16 (set, cur) = (18, 20)
est1: Invalid freq 2394, ignored.
est1: Invalid id16 (set, cur) = (17, 20)
est1: Invalid freq 2261, ignored.
est1: Invalid id16 (set, cur) = (16, 20)
est1: Invalid freq 2128, ignored.
est1: Invalid id16 (set, cur) = (15, 20)
est1: Invalid freq 1995, ignored.
est1: Invalid id16 (set, cur) = (14, 20)
est1: Invalid freq 1862, ignored.
est1: Invalid id16 (set, cur) = (13, 20)
est1: Invalid freq 1729, ignored.
est1: Invalid id16 (set, cur) = (12, 20)
est1: Invalid freq 1596, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (19, 20)
est2: Invalid freq 2527, ignored.
est2: Invalid id16 (set, cur) = (18, 20)
est2: Invalid freq 2394, ignored.
est2: Invalid id16 (set, cur) = (17, 20)
est2: Invalid freq 2261, ignored.
est2: Invalid id16 (set, cur) = (16, 20)
est2: Invalid freq 2128, ignored.
est2: Invalid id16 (set, cur) = (15, 20)
est2: Invalid freq 1995, ignored.
est2: Invalid id16 (set, cur) = (14, 20)
est2: Invalid freq 1862, ignored.
est2: Invalid id16 (set, cur) = (13, 20)
est2: Invalid freq 1729, ignored.
est2: Invalid id16 (set, cur) = (12, 20)
est2: Invalid freq 1596, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (19, 20)
est3: Invalid freq 2527, ignored.
est3: Invalid id16 (set, cur) = (18, 20)
est3: Invalid freq 2394, ignored.
est3: Invalid id16 (set, cur) = (17, 20)
est3: Invalid freq 2261, ignored.
est3: Invalid id16 (set, cur) = (16, 20)
est3: Invalid freq 2128, ignored.
est3: Invalid id16 (set, cur) = (15, 20)
est3: Invalid freq 1995, ignored.
est3: Invalid id16 (set, cur) = (14, 20)
est3: Invalid freq 1862, ignored.
est3: Invalid id16 (set, cur) = (13, 20)
est3: Invalid freq 1729, ignored.
est3: Invalid id16 (set, cur) = (12, 20)
est3: Invalid freq 1596, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (19, 20)
est4: Invalid freq 2527, ignored.
est4: Invalid id16 (set, cur) = (18, 20)
est4: Invalid freq 2394, ignored.
est4: Invalid id16 (set, cur) = (17, 20)
est4: Invalid freq 2261, ignored.
est4: Invalid id16 (set, cur) = (16, 20)
est4: Invalid freq 2128, ignored.
est4: Invalid id16 (set, cur) = (15, 20)
est4: Invalid freq 1995, ignored.
est4: Invalid id16 (set, cur) = (14, 20)
est4: Invalid freq 1862, ignored.
est4: Invalid id16 (set, cur) = (13, 20)
est4: Invalid freq 1729, ignored.
est4: Invalid id16 (set, cur) = (12, 20)
est4: Invalid freq 1596, ignored.
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (19, 20)
est5: Invalid freq 2527, ignored.
est5: Invalid id16 (set, cur) = (18, 20)
est5: Invalid freq 2394, ignored.
est5: Invalid id16 (set, cur) = (17, 20)
est5: Invalid freq 2261, ignored.
est5: Invalid id16 (set, cur) = (16, 20)
est5: Invalid freq 2128, ignored.
est5: Invalid id16 (set, cur) = (15, 20)
est5: Invalid freq 1995, ignored.
est5: Invalid id16 (set, cur) = (14, 20)
est5: Invalid freq 1862, ignored.
est5: Invalid id16 (set, cur) = (13, 20)
est5: Invalid freq 1729, ignored.
est5: Invalid id16 (set, cur) = (12, 20)
est5: Invalid freq 1596, ignored.
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (19, 20)
est6: Invalid freq 2527, ignored.
est6: Invalid id16 (set, cur) = (18, 20)
est6: Invalid freq 2394, ignored.
est6: Invalid id16 (set, cur) = (17, 20)
est6: Invalid freq 2261, ignored.
est6: Invalid id16 (set, cur) = (16, 20)
est6: Invalid freq 2128, ignored.
est6: Invalid id16 (set, cur) = (15, 20)
est6: Invalid freq 1995, ignored.
est6: Invalid id16 (set, cur) = (14, 20)
est6: Invalid freq 1862, ignored.
est6: Invalid id16 (set, cur) = (13, 20)
est6: Invalid freq 1729, ignored.
est6: Invalid id16 (set, cur) = (12, 20)
est6: Invalid freq 1596, ignored.
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (19, 20)
est7: Invalid freq 2527, ignored.
est7: Invalid id16 (set, cur) = (18, 20)
est7: Invalid freq 2394, ignored.
est7: Invalid id16 (set, cur) = (17, 20)
est7: Invalid freq 2261, ignored.
est7: Invalid id16 (set, cur) = (16, 20)
est7: Invalid freq 2128, ignored.
est7: Invalid id16 (set, cur) = (15, 20)
est7: Invalid freq 1995, ignored.
est7: Invalid id16 (set, cur) = (14, 20)
est7: Invalid freq 1862, ignored.
est7: Invalid id16 (set, cur) = (13, 20)
est7: Invalid freq 1729, ignored.
est7: Invalid id16 (set, cur) = (12, 20)
est7: Invalid freq 1596, ignored.
p4tcc7: <CPU Frequency Thermal Control> on cpu7
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xccfff,0xcd000-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57
ata1: [MPSAFE]
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 197995 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669424 hz
Timecounter "TSC" frequency 2666776924 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00000000firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
ata0: New devices: 00000000
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000001
ata4: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 76319MB <Seagate ST380811AS 3.AAE> at ata4-master SATA150
ad8: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad8
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad8: Intel check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ata6: Identifying devices: 00000000
ata6: New devices: 00000000
ata7: Identifying devices: 00000000
ata7: New devices: 00000000
ata8: Identifying devices: 00000000
ata8: New devices: 00000000
GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen0.2: <American Power Conversion> at usbus0
ugen6.2: <Holtek Semiconductor, Inc.> at usbus6
ukbd0: <Holtek Semiconductor, Inc. product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus6
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums1: <Holtek Semiconductor, Inc. product 0x1400, class 0/0, rev 1.10/1.43, addr 2> on usbus6
ums1: 5 buttons and [XYZ] coordinates
ugen1.2: <Aladdin Knowledge Systems Ltd.> at usbus1
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 4 vector 48
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 2 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 4 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 6 vector 49
msi: Assigning MSI IRQ 256 to local APIC 2 vector 50
msi: Assigning MSI IRQ 257 to local APIC 4 vector 50
Trying to mount root from ufs:/dev/ad8s1a
ct_to_ts([2009-03-21 10:28:50]) = 1237631330.000000000
start_init: trying /sbin/init
em1: Link is up 100 Mbps Full Duplex
em1: Link is Down
em1: Link is up 100 Mbps Full Duplex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200903211449.n2LEmxwC034905>