Date: Sat, 18 Jul 2009 12:29:32 -0400 From: Andrey Shuvikov <mr.hyro@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: hald: kmem_malloc error Message-ID: <24393ae80907180929x71d2cf1frb8f1c900bf79c46a@mail.gmail.com> In-Reply-To: <200907172202.43824.mel.flynn%2Bfbsd.questions@mailing.thruhere.net> References: <24393ae80907171959u62705d8akb1e0aaec1d2f2c44@mail.gmail.com> <200907172202.43824.mel.flynn%2Bfbsd.questions@mailing.thruhere.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jul 18, 2009 at 2:02 AM, Mel Flynn<mel.flynn+fbsd.questions@mailing.thruhere.net> wrote: > On Friday 17 July 2009 18:59:49 Andrey Shuvikov wrote: > >> I'm trying to configure X and according to the manual enabled DBUS and >> HALD. But when hald is starting up I get kernel panic: >> >> kmem_malloc: entry not found or misaligned >> >> Does anyone know what could be wrong? I have memory dump if it can >> help but it's big (173M). > > If you have a file /var/crash/vmcore.0, you will want to run the > following command: > kgdb /boot/kernel/kernel /var/crash/vmcore.0 > Then type bt at the prompt and paste output here. > > More info: > <http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html>; > > uname -a and dmesg output also help in diagnosing this problem. > -- > Mel > The uname output is: FreeBSD foxtrot.home 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 The kgdb output: GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"... Unread portion of the kernel message buffer: panic: kmem_malloc: entry not found or misaligned cpuid = 0 Uptime: 52s Physical memory: 2034 MB Dumping 176 MB: 161 145 129 113 97 81 65 49 33 17 1 Reading symbols from /boot/kernel/linux.ko...Reading symbols from /boot/kernel/linux.ko.symbols...done. done. Loaded symbols for /boot/kernel/linux.ko #0 doadump () at pcpu.h:196 196 pcpu.h: No such file or directory. in pcpu.h (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc07e25a7 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418 #2 0xc07e2879 in panic (fmt=Variable "fmt" is not available. ) at /usr/src/sys/kern/kern_shutdown.c:574 #3 0xc0a1cdc0 in kmem_malloc (map=0xc147108c, size=0, flags=2) at /usr/src/sys/vm/vm_kern.c:381 #4 0xc0a13357 in page_alloc (zone=0x0, bytes=0, pflag=0xe7b6497f "\002", wait=2) at /usr/src/sys/vm/uma_core.c:952 #5 0xc0a15e20 in uma_large_malloc (size=0, wait=2) at /usr/src/sys/vm/uma_core.c:2706 #6 0xc07d16f8 in malloc (size=0, mtp=0xc0c46580, flags=2) at /usr/src/sys/kern/kern_malloc.c:393 #7 0xc0743044 in uhidopen (dev=0xc5713000, flag=1, mode=8192, p=0xc5c6a460) at /usr/src/sys/dev/usb/uhid.c:428 #8 0xc07a56a0 in giant_open (dev=0xc5713000, oflags=1, devtype=8192, td=0xc5c6a460) at /usr/src/sys/kern/kern_conf.c:332 #9 0xc076e1fc in devfs_open (ap=0xe7b64a88) at /usr/src/sys/fs/devfs/devfs_vnops.c:908 #10 0xc0af88d2 in VOP_OPEN_APV (vop=0xc0c47ee0, a=0xe7b64a88) at vnode_if.c:371 #11 0xc0870829 in vn_open_cred (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0, cred=0xc5470100, fp=0xc5b57da8) at vnode_if.h:199 #12 0xc0870973 in vn_open (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0, fp=0xc5b57da8) at /usr/src/sys/kern/vfs_vnops.c:94 #13 0xc086e0a3 in kern_open (td=0xc5c6a460, path=0xbfbfe90c <Address 0xbfbfe90c out of bounds>, pathseg=UIO_USERSPACE, flags=1, mode=0) at /usr/src/sys/kern/vfs_syscalls.c:1042 #14 0xc086e610 in open (td=0xc5c6a460, uap=0xe7b64cfc) at /usr/src/sys/kern/vfs_syscalls.c:1009 #15 0xc0ae4495 in syscall (frame=0xe7b64d38) at /usr/src/sys/i386/i386/trap.c:1090 #16 0xc0ac9260 in Xint0x80_syscall () at /usr/src/sys/i386/i386/exception.s:255 #17 0x00000033 in ?? () Previous frame inner to this frame (corrupt stack?) (kgdb) q The dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2146893824 (2047 MB) avail memory = 2091225088 (1994 MB) ACPI APIC Table: <A_M_I_ OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <A_M_I_ OEMRSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on pci1 pci1: <multimedia, HDA> at device 0.1 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub3 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SX6121 UDMA133 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci2: <ACPI PCI bus> on pcib4 ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: Using 1 MSI messages. miibus0: <MII bus> on ale0 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto ale0: Ethernet address: 00:22:15:5a:67:e8 ale0: [FILTER] uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 6 ports with 6 removable, self powered ugen0: <Microsoft Microsoft LifeCam VX-5000, class 239/2, rev 2.00/1.00, addr 2> on uhub7 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 19 at device 3.0 on pci5 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:1e:8c:00:01:63:47:d0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:1e:8c:63:47:d0 fwe0: Ethernet address: 02:1e:8c:63:47:d0 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:1e:8c:00:01:63:47:d0 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x12e4000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH10 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata3: <ATA channel 0> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 1> on atapci1 ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH10 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0 atapci2: [ITHREAD] ata5: <ATA channel 0> on atapci2 ata5: [ITHREAD] ata6: <ATA channel 1> on atapci2 ata6: [ITHREAD] acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 cpu0: <ACPI CPU> on acpi0 ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE, should be E5 [20070320] est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 618092006000920 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd27ff pnpid ORM0000 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhid0: <Yealink Network Technology Ltd. VOIP USB Phone, class 0/0, rev 1.01/0.00, addr 2> on uhub5 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DVDR <PLEXTOR DVDR PX-712A/1.04> at ata2-master UDMA33 ad6: 152627MB <WDC WD1600JS-00SGB0 20.06C03> at ata3-master SATA300 ad8: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata4-master SATA300 GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS. GEOM_LABEL: Label for provider ad8s1 is ntfs/New Volume. GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc. GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0. GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33. GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f. GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e. (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0 (probe0:umass-sim0:0:0:1): Medium not present (probe0:umass-sim0:0:0:1): Unretryable error (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition (probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0 (probe0:umass-sim0:0:0:2): Medium not present (probe0:umass-sim0:0:0:2): Unretryable error (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition (probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0 (probe0:umass-sim0:0:0:3): Medium not present (probe0:umass-sim0:0:0:3): Unretryable error SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <Generic USB xD/SM Reader 1.02> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad6s3a GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed. GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc. GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed. GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e. GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed. GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33. GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed. GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f. GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed. GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0. GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed. GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed. GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed. GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed. GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed. GEOM_LABEL: Label msdosfs/FREEDOS removed. GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS. GEOM_LABEL: Label msdosfs/FREEDOS removed. Thanks, Andrey
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?24393ae80907180929x71d2cf1frb8f1c900bf79c46a>