Date: Mon, 2 May 2005 15:49:05 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: Danny Braniss <danny@cs.huji.ac.il> Cc: stable@freebsd.org Subject: Re: Can isp driver support Qlogic 2340 on FreeBSD5.x or later? Message-ID: <20050502134905.GA15646@freebie.xs4all.nl> In-Reply-To: <E1DSbEU-000Bhv-Gf@cs1.cs.huji.ac.il> References: <E1DSbEU-000Bhv-Gf@cs1.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, May 02, 2005 at 04:45:10PM +0300, Danny Braniss wrote.. > > Yes, the 234X cards have been supported for quite a while. > > > it seems not all of them: > it's a QLA2342/ISP2312 and im getting: > isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x2400-0x24ff mem > 0xfe8e0000-0xfe8e0fff irq 24 at device 8.0 on pci3 > isp1: bad execution throttle of 0- using 16 > isp2: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x2000-0x20ff mem > 0xfe8f0000-0xfe8f0fff irq 27 at device 8.1 on pci3 > isp2: bad execution throttle of 0- using 16 Have you loaded the ispfw.ko firmware module? Matt tests the driver against that firmware, not against all the firmware revs Qlogic has released over time. > > > DELL has a clone card which up until recently wasn't supported. > > > > The 236X/63XX cards are not yet supported. > > > > On 4/14/05, wsk <wsk@gddsn.org.cn> wrote: > > > folks: > > > Can the Qlogic 2340 Fibre Channel card works on FreeBSD now? > > > DELL released a newest Server PE6850 with this card.thx > > > _______________________________________________ > > > freebsd-current@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-current > > > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > > > > > _______________________________________________ > > freebsd-current@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-current > > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" --- end of quoted text --- -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050502134905.GA15646>