Date: Tue, 26 Feb 2002 15:59:25 -0800 From: "Jesse Geddis" <sgeine@yahoo.com> To: "FreeBSD-STABLE" <freebsd-stable@freebsd.org> Subject: RE: linksys Ethernet card Message-ID: <NGBBKILMGLGEDIHMGJANEEIDCAAA.sgeine@yahoo.com> In-Reply-To: <NGBBKILMGLGEDIHMGJANKEHPCAAA.sgeine@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
did not know about FreeBSD-mobile, looks like I got it though, thanks again =) -----Original Message----- From: owner-freebsd-stable@FreeBSD.ORG [mailto:owner-freebsd-stable@FreeBSD.ORG]On Behalf Of Jesse Geddis Sent: Tuesday, February 26, 2002 3:01 PM To: FreeBSD-STABLE Subject: linksys ethernet card I've never tried putting FreeBSD on a laptop, only ever put it on racked machines. I'm running 4.4 stable and was wondering about how to define the Ethernet adapter in the kernel? dmesg output ed1 at port 0x300-0x31f irq 10 slot 0 on pccard0 ed1: address 00:e0:98:00:5e:11, type Linksys (16 bit) what I was guessing was: device ed0 at isa? port 0x300-03x1f slot0 on pccard0 but I'm not sure this is the right bus I don't mind if it gets nailed to that slot, it won't be moving. here's what lint has device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 this is a 10/100 card so i'm assuming the miibus is required? i also have... device card device pcic0 at isa? in there. dmesg below thanks in advance for the help. and yes this laptop is very old =P trying to put it to use. Preloaded elf kernel "kernel" at 0xc0480000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc048009c. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface isa0: <ISA bus> on motherboard orm0: <Option ROMs> at iomem 0xe0000-0xe9fff,0xea000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Cirrus logic 672x> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master BIOSPIO Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 0 ed1 at port 0x300-0x31f irq 10 slot 0 on pccard0 ed1: address 00:e0:98:00:5e:11, type Linksys (16 bit) lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NGBBKILMGLGEDIHMGJANEEIDCAAA.sgeine>