Date: Fri, 13 Dec 2013 08:31:13 +0000 (UTC) From: Peter Grehan <grehan@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r259302 - head/usr.sbin/bhyve Message-ID: <201312130831.rBD8VDpF033830@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: grehan Date: Fri Dec 13 08:31:13 2013 New Revision: 259302 URL: http://svnweb.freebsd.org/changeset/base/259302 Log: bhyve(8) man page. mdoc formatting and much input and review from Warren Block (wblock@). Reviewed by: many MFC after: 3 days Added: head/usr.sbin/bhyve/bhyve.8 (contents, props changed) Modified: head/usr.sbin/bhyve/Makefile Modified: head/usr.sbin/bhyve/Makefile ============================================================================== --- head/usr.sbin/bhyve/Makefile Fri Dec 13 06:59:18 2013 (r259301) +++ head/usr.sbin/bhyve/Makefile Fri Dec 13 08:31:13 2013 (r259302) @@ -6,6 +6,7 @@ PROG= bhyve DEBUG_FLAGS= -g -O0 +MAN= bhyve.8 SRCS= acpi.c atpic.c bhyverun.c block_if.c consport.c dbgport.c elcr.c SRCS+= inout.c legacy_irq.c mem.c mevent.c mptbl.c pci_ahci.c SRCS+= pci_emul.c pci_hostbridge.c pci_lpc.c pci_passthru.c pci_virtio_block.c @@ -15,8 +16,6 @@ SRCS+= uart_emul.c virtio.c xmsr.c spinu .PATH: ${.CURDIR}/../../sys/amd64/vmm SRCS+= vmm_instruction_emul.c -NO_MAN= - DPADD= ${LIBVMMAPI} ${LIBMD} ${LIBUTIL} ${LIBPTHREAD} LDADD= -lvmmapi -lmd -lutil -lpthread Added: head/usr.sbin/bhyve/bhyve.8 ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/usr.sbin/bhyve/bhyve.8 Fri Dec 13 08:31:13 2013 (r259302) @@ -0,0 +1,299 @@ +.\" Copyright (c) 2013 Peter Grehan +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd December 12, 2013 +.Dt BHYVE 8 +.Os +.Sh NAME +.Nm bhyve +.Nd "run a guest operating system inside a virtual machine" +.Sh SYNOPSIS +.Nm +.Op Fl aehAHPW +.Op Fl c Ar numcpus +.Op Fl g Ar gdbport +.Op Fl p Ar pinnedcpu +.Op Fl s Ar slot,emulation Ns Op , Ns Ar conf +.Op Fl S Ar slot,emulation Ns Op , Ns Ar conf +.Op Fl l Ar lpcdev Ns Op , Ns Ar conf +.Ar vmname +.Sh DESCRIPTION +.Nm +is an experimental hypervisor that runs guest operating systems inside a +virtual machine. +.Pp +Parameters such as the number of virtual CPUs, amount of guest memory, and +I/O connectivity can be specified with command-line parameters. +.Pp +The guest operating system must be loaded with +.Xr bhyveload 4 +or a similar boot loader before running +.Nm . +.Pp +.Nm +runs until the guest operating system reboots or an unhandled hypervisor +exit is detected. +.Sh OPTIONS +.Bl -tag -width 10n +.It Fl a +Disallow use of the local APIC in X2APIC mode. +.It Fl A +Generate ACPI tables. +Required for +.Fx Ns /amd64 +guests. +.It Fl c Ar numcpus +Number of guest virtual CPUs. +The default is 1 and the maximum is 16. +.It Fl H +Yield the virtual CPU thread when a HLT instruction is detected. +If this option is not specified, virtual CPUs will use 100% of a host CPU. +.It Fl g Ar gdbport +For +.Fx Ns /amd64 kernels compiled with +.Cd "option bvmdebug" , +allow a remote kernel kgdb to be relayed to the guest kernel gdb stub +via a local IPv4 address and this port. +This option will be deprecated in a future version. +.It Fl p Ar pinnedcpu +Force guest virtual CPUs to be pinned to host CPUs. +Virtual CPU +.Em n +is pinned to host CPU +.Em pinnedcpu+n . +.It Fl P +Force the guest virtual CPU to exit when a PAUSE instruction is detected. +.It Fl W +Force virtio PCI device emulations to use MSI interrupts instead of MSI-X +interrupts. +.It Fl s Ar slot,emulation Ns Op , Ns Ar conf +Configure a virtual PCI slot and function. +.Pp +.Nm bhyve +provides PCI bus emulation and virtual devices that can be attached to +slots on the bus. +There are 32 available slots, with the option of providing up to 8 functions +per slot. +.Bl -tag -width 10n +.It Ar slot +.Ar pcislot Ns Op Ar :function +.Pp +The +.Ar pcislot +value is 0 to 31 and the optional function value is 0 to 7. +If not specified, the function value defaults to 0. +.It Ar emulation +.Bl -tag -width 10n +.It Li hostbridge | Li amd_hostbridge +.Pp +Provide a simple host bridge. +This is usually configured at slot 0, and is required by most guest +operating systems. +The +.Li amd_hostbridge +emulation is identical but uses a PCI vendor ID of +.Li AMD . +.It Li passthru +PCI pass-through device. +.It Li virtio-net +Virtio network interface. +.It Li virtio-block +Virtio block storage interface. +.It Li ahci-cd +AHCI controller attached to an ATAPI CD/DVD. +.It Li ahci-hd +AHCI controller attached to a SATA hard-drive. +.It Li uart +PCI 16550 serial device. +.It Li lpc +LPC PCI-ISA bridge with COM1 and COM2 16550 serial ports. +.El +.It Op Ar conf +This optional parameter describes the backend for device emulations. +If +.Ar conf +is not specified, the device emulation has no backend and can be +considered unconnected. +.Pp +Network devices: +.Bl -tag -width 10n +.It Ar tapN Ns Op , Ns Ar mac=xx:xx:xx:xx:xx:xx +.It Ar vmnetN Ns Op , Ns Ar mac=xx:xx:xx:xx:xx:xx +.Pp +If +.Ar mac +is not specified, the MAC address is derived from a fixed OUI and the +remaining bytes from an MD5 hash of the slot and function numbers and +the device name. +.Pp +The MAC address is an ASCII string in +.Xr ethers 5 +format. +.El +.Pp +Block storage devices: +.Bl -tag -width 10n +.It Pa /filename Ns Oo , Ns Li nocache Oc Ns Oo , Ns Li direct Oc Ns Oo , Ns Li ro Oc +.It Pa /dev/xxx Ns Oo , Ns Ar nocache Oc Ns Oo , Ns Ar direct Oc Ns Oo , Ns Ar ro Oc +.Bl -tag -width 8n +.It Li nocache +Open the file with +.Dv O_DIRECT . +.It Li direct +Open the file using +.Dv O_SYNC . +.It Li ro +Force the file to be opened read-only. +.El +.Pp +The +.Li nocache , +.Li direct , +and +.Li ro +options are not available for virtio block devices. +.El +.Pp +TTY devices: +.Bl -tag -width 10n +.It Li stdio +Connect the serial port to the standard input and output of +the bhyve process. +.It Pa /dev/xxx +Use the host TTY device for serial port I/O. +.El +.Pp +Pass-through devices: +.Bl -tag -width 10n +.It Ns Ar slot Ns / Ns Ar bus Ns / Ns Ar function +Connect to a PCI device on the host at the selector described by +.Ar slot , +.Ar bus , +and +.Ar function +numbers. +.El +.Pp +The host device must have been reserved at boot-time using the +.Va pptdev +loader variable as described in +.Xr vmm 4 . +.El +.It Fl S Ar slot , Ns Ar emulation Ns Op , Ns Ar conf +Identical to the -s option except the device is instructed to use legacy +ISA addresses if possible. +Currently this only has an effect with the +.Li uart +device emulation. +This option will be deprecated in a future version. +.It Fl l Ar lpcdev Ns Op , Ns Ar conf +Allow devices behind the LPC PCI-ISA bridge to be configured. +The only supported devices are the TTY-class devices, +.Li com1 +and +.Li com2 . +.It Fl m Ar size Ns Op Ar K|k|M|m|G|g|T|t +Guest physical memory size in bytes. +This must be the same size that was given to +.Xr bhyveload 8 . +.Pp +The size argument may be suffixed with one of K, M, G or T (either upper +or lower case) to indicate a multiple of kilobytes, megabytes, gigabytes, +or terabytes. +If no suffix is given, the value is assumed to be in megabytes. +.It Fl e +Force +.Nm +to exit when a guest issues an access to an I/O port that is not emulated. +This is intended for debug purposes. +.It Fl h +Print help message and exit. +.It Ar vmname +Alphanumeric name of the guest. +This should be the same as that created by +.Xr bhyveload 8 . +.El +.Sh EXAMPLES +The guest operating system must have been loaded with +.Xr bhyveload 4 +or a similar boot loader before +.Xr bhyve 4 +can be run. +.Pp +To run a virtual machine with 1GB of memory, two virtual CPUs, a virtio +block device backed by the +.Pa /my/image +filesystem image, and a serial port for the console: +.Bd -literal -offset indent +bhyve -c 2 -s 0,hostbridge -s 1,lpc -s 2,virtio-blk,/my/image \\ + -l com1,stdio -A -H -P -m 1G vm1 +.Ed +.Pp +Run a 24GB single-CPU virtual machine with three network ports, one of which +has a MAC address specified: +.Bd -literal -offset indent +bhyve -s 0,hostbridge -s 1,lpc -s 2:0,virtio-net,tap0 \\ + -s 2:1,virtio-net,tap1 \\ + -s 2:2,virtio-net,tap2,mac=00:be:fa:76:45:00 \\ + -s 3,virtio-blk,/my/image -l com1,stdio \\ + -A -H -P -m 24G bigvm +.Ed +.Pp +Run an 8GB quad-CPU virtual machine with 8 AHCI SATA disks, an AHCI ATAPI +CD-ROM, a single virtio network port, an AMD hostbridge, and the console +port connected to an +.Xr nmdm 4 +null-model device. +.Bd -literal -offset indent +bhyve -c 4 \e\ + -s 0,amd_hostbridge -s 1,lpc \\ + -s 1:0,ahci-hd,/images/disk.1 \\ + -s 1:1,ahci-hd,/images/disk.2 \\ + -s 1:2,ahci-hd,/images/disk.3 \\ + -s 1:3,ahci-hd,/images/disk.4 \\ + -s 1:4,ahci-hd,/images/disk.5 \\ + -s 1:5,ahci-hd,/images/disk.6 \\ + -s 1:6,ahci-hd,/images/disk.7 \\ + -s 1:7,ahci-hd,/images/disk.8 \\ + -s 2,ahci-cd,/images.install.iso \\ + -s 3,virtio-net,tap0 \\ + -l com1,/dev/nmdm0A \\ + -A -H -P -m 8G +.Ed +.Sh SEE ALSO +.Xr bhyve 4 , +.Xr nmdm 4 , +.Xr vmm 4 , +.Xr ethers 5 , +.Xr bhyveload 8 , +.Xr bhyvectl 8 +.Sh HISTORY +.Nm +first appeared in +.Fx 10.0 . +.Sh AUTHORS +.An Neel Natu Aq neel@freebsd.org +.An Peter Grehan Aq grehan@freebsd.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201312130831.rBD8VDpF033830>