Date: Sun, 6 Oct 1996 17:12:09 -0700 (PDT) From: "Jonathan M. Bresler" <jmb> To: wb2oyc@cyberenet.net Cc: root@gemini.gouverneur.com, questions@freebsd.org Subject: Re: ppp.conf for iij Message-ID: <199610070012.RAA21118@freefall.freebsd.org> In-Reply-To: <XFMail.961005124443.wb2oyc@cyberenet.net> from "wb2oyc@cyberenet.net" at Oct 5, 96 12:27:27 pm
next in thread | previous in thread | raw e-mail | index | archive | help
wb2oyc@cyberenet.net wrote:
>
>
> On 04-Oct-96 Charlie Root wrote:
> >>I would really like to make use of the ppp.conf for tun0 but
> >I can't get my modem to dial using it. I have a USR 14.4 Sportster.
> >I can call out manually, but I prefer the script method. Any
> >suggestions.
>
> Well, they say misery loves company, so I thought I'd let you
> know that I'm waiting to see some answer to this one myself! I
> can't get the damn thing to dial either, and haven't been able
> to with three different installations. All have different modems,
> and ports, etc, but on all of them I have to use 'term' mode and
> manually dial/login to my ISP. There is some magic involved to
> make it work apparently, and its not intuitively obvious to the
> most casual observer... :) Linux PPP, with all its problems with
> it being a moving target is far superior to this as far as I can
> see.
are you using iijppp or kernel ppp?
if you are using iijppp you can use the ppp.conf and ppp.linkup
below. i have included modem settings
modem settings:
ati3
Sportster 14,400/FAX RS Rev. 1.5
ati4
USRobotics Sportster 14400 Fax Settings...
B0 E1 F1 M1 Q0 V1 X0 Y0
BAUD=57600 PARITY=N WORDLEN=8
DIAL=TONE ON HOOK
&A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1
&M4 &N0 &P0 &R2 &S1 &T5 &Y1
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000
S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019
S25=005 S27=000 S28=008 S29=020 S36=014 S38=000
ti7
Configuration Profile...
Product type US/Canada External
Options V32
Fax Options Class 1
Clock Freq 24.0Mhz
Eprom 128k
Ram 32k
EPROM date 5/18/95
DSP date 5/18/95
EPROM rev 1.5
DSP rev 1.5
ati9
(1.0USR0000\\Modem\no driver ID\Sportster 14.4 FAX EXT)FF
/etc/ppp.conf
#
# BEWARE: a blank line is a separator!
# it ENDS a configuration
# and begins an unlabeled configuration
#
#
# settings listed as default are always used.
# they may be overridden by settings for a particular site
#
default:
set debug phase lcp chat lqm
# set debug phase
set device /dev/cua01
set speed 57600
set timeout 18000
disable lqr
deny lqr
disable pred1
deny pred1
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0X0 OK-AT-OK
\\dATDT\\T TIMEOUT 40 CONNECT"
#
# assume that we will be talking to rimmer
correct later in ppp.linkup as needed
# accept any address assigned to us
#
atinc:
set phone aaabbbcccc
set login "TIMEOUT 10 mmer>-\\r-mmer>-\\r-mmer> set\\sppp"
set ifaddr 207.2.166.205/24 207.2.166.21/24
# add 0 0 198.138.38.21
# set ifaddr 198.138.38.205 198.138.38.21
add 0 255.255.255.0 207.2.166.21
ppp.linkup
# 1) At first, IP address assigned into our side is serched and execute
# associated command.
#
# 2) If it didn't found, then label name specified at startup time is
# searched.
#
# 3) If given label name is not found, then label MYADDR is serched.
#
# if connecting to A&T delete existing routing entries
# add peer as default gateway
#
atinc:
# delete _ALL NEVER use delete ALL with X or xdm running
# server will disconnect from keyboard
#
# DID NOT MATTER still locked up after ppp link was established!
#
add 0 0 HISADDR
MYADDR:
add 0 0 HISADDR
jmb
--
Jonathan M. Bresler FreeBSD Postmaster jmb@FreeBSD.ORG
FreeBSD--4.4BSD Unix for PC clones, source included. http://www.freebsd.org/
PGP 2.6.2 Fingerprint: 31 57 41 56 06 C1 40 13 C5 1C E3 E5 DC 62 0E FB
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199610070012.RAA21118>