Date: Mon, 01 Jan 2024 23:40:54 +0000 From: bugzilla-noreply@freebsd.org To: net@FreeBSD.org Subject: [Bug 166724] if_re(4): watchdog timeout Message-ID: <bug-166724-7501-YwKxL8bnd6@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-166724-7501@https.bugs.freebsd.org/bugzilla/> References: <bug-166724-7501@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D166724 Riccardo Torrini <riccardo@torrini.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |riccardo@torrini.org --- Comment #114 from Riccardo Torrini <riccardo@torrini.org> --- Me too message, with a bit of info: - before 13.2-p8 I have seen watchdog timeout probably not more than one per month, never looked for a fix - machine is my home desktop, all others have Intel card - I use powerd - it happens during "restic" backup (so with probaly high bi-directional traffic) - I have /home over NFSv3, nothing like this happens on last (10?) years - I can confirm that only a reboot fix the missing ethernet driver - I just added pkg (realtek-re-kmod-199.00_1 installed) # MoBo info (AMI BIOS) Manufacturer: ASUSTeK COMPUTER INC. Product Name: PRIME B250M-A Processor: Intel(R) Core(TM) i5-7600 CPU @ 3.50GHz RAM: 2x 8GB DDR4 2133 (w/out overclock) # yesterday boot / kernel module re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7004000-0xf7004fff,0xf7000000-0xf7003fff irq 19 at dev= ice 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:4d:54:68:ae:62 re0: netmap queues/slots: TX 1/256, RX 1/256 re0: link state changed to DOWN re0: link state changed to UP # last boot / pkg module re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7004000-0xf7004fff,0xf7000000-0xf7003fff irq 19 at device 0.0 on pci1 re0: Using Memory Mapping! re0: Using 1 MSI-X message re0: ASPM disabled re0: version:1.99.04 re0: Ethernet address: 2c:4d:54:68:ae:62 re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:4d:54:68:ae:62 re0: link state changed to UP # ifconfig using pkg (I forget to save output using kernel module) re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D60251b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,LRO,WOL_MAGIC,R= XCSUM_IPV6,TXCSUM_IPV6> ether 2c:4d:54:68:ae:62 inet {home_lan} netmask 0xffffff00 broadcast {home_lan} media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> re0@pci0:2:0:0: class=3D0x020000 rev=3D0x15 hdr=3D0x00 vendor=3D0x10ec devi= ce=3D0x8168 subvendor=3D0x1043 subdevice=3D0x8677 vendor =3D 'Realtek Semiconductor Co., Ltd.' device =3D 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controll= er' class =3D network subclass =3D ethernet bar [10] =3D type I/O Port, range 32, base 0xe000, size 256, enabled bar [18] =3D type Memory, range 64, base 0xf7004000, size 4096, enabl= ed bar [20] =3D type Memory, range 64, base 0xf7000000, size 16384, enab= led cap 01[40] =3D powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] =3D MSI supports 1 message, 64 bit=20 cap 10[70] =3D PCI-Express 2 endpoint MSI 1 max data 128(128) RO max read 2048 link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1) ClockPM disabled cap 11[b0] =3D MSI-X supports 4 messages, enabled Table in map 0x20[0x0], PBA in map 0x20[0x800] ecap 0001[100] =3D AER 2 0 fatal 0 non-fatal 0 corrected ecap 0002[140] =3D VC 1 max VC0 ecap 0003[160] =3D Serial 1 01000000684ce000 ecap 0018[170] =3D LTR 1 ecap 001e[178] =3D L1 PM Substates 1 # current values from sysctl (all automatic) kern.ipc.nmbjumbop: 504907 kern.ipc.nmbclusters: 1009815 kern.ipc.nmbjumbo9: 149602 kern.ipc.nmbjumbo16: 84151 # devinfo (partial) pcib2 pnpinfo vendor=3D0x8086 device=3D0xa297 subvendor=3D0x1043 subdevice=3D0x8694 class=3D0x060400 at slot=3D28 function=3D7 dbsf=3Dpci0:0= :28:7 handle=3D\_SB_.PCI0.RP08 I/O ports: 0xe000-0xefff I/O memory addresses: 0xf7000000-0xf70fffff PCI domain 0 bus numbers: 2 pci1 pcib2 bus numbers: 2 re0 pnpinfo vendor=3D0x10ec device=3D0x8168 subvendor=3D0x1043 subdevice=3D0x8677 class=3D0x020000 at slot=3D0 function=3D0 dbsf=3Dpci0:2:= 0:0 handle=3D\_SB_.PCI0.RP08.PXSX Interrupt request lines: 0x83 pcib2 I/O port window: 0xe000-0xe0ff pcib2 memory window: 0xf7000000-0xf7003fff 0xf7004000-0xf7004fff Thanks a lot to all people working on this. And finally a big thanks to ale@ for the port ;) --=20 You are receiving this mail because: You are on the CC list for the bug. You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-166724-7501-YwKxL8bnd6>