Date: Fri, 29 Nov 2002 01:50:56 +0100 From: Thomas Seck <tmseck-lists@netcologne.de> To: freebsd-current@freebsd.org Subject: ACPI errors w/ latest ACPI code on GA BX2000 based system Message-ID: <20021129005056.GA770@laurel.tmseck.homedns.org>
next in thread | raw e-mail | index | archive | help
A freshly built system with Now 28 sources now throws the ACPI errors
seen in the dmesg output. The former ACPI snapshot did not complain in
any way on this system.
The board in question is a Gigabyte BX2000 with F7 BIOS.
--Thomas
dmesg:
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #0: Fri Nov 29 00:53:39 CET 2002
> thomas@hardy.tmseck.homedns.org:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0614000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06140a8.
> Timecounter "i8254" frequency 1193182 Hz
> Timecounter "TSC" frequency 549940129 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (549.94-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x673 Stepping = 3
> Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
> real memory = 268369920 (255 MB)
> avail memory = 254169088 (242 MB)
> Initializing GEOMetry subsystem
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <COMPAQ AWRDACPI> on motherboard
> ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
> Using $PIR table, 8 entries at 0xc00fdd70
> ACPI-0438: *** Error: Looking up [FAN_] in namespace, AE_NOT_FOUND
> ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-safe" frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> ACPI-0438: *** Error: Looking up [FAN_] in namespace, AE_NOT_FOUND
> ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe0000000-0xe00000ff irq 5 at device 10.0 on pci0
> rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
> rl0: Ethernet address: 00:48:54:3d:60:ce
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pci0: <multimedia, audio> at device 11.0 (no driver attached)
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model MouseMan+, device ID 0
> orm0: <Option ROMs> at iomem 0xc8000-0xc9fff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> ad0: DMA limited to UDMA33, non-ATA66 cable or device
> ad0: 19541MB <Maxtor 92041U4> [39703/16/63] at ata0-master UDMA33
> acd0: CDROM <NEC CD-ROM DRIVE:282> at ata0-slave UDMA33
> acd1: CD-RW <LITE-ON LTR-24102B> at ata1-slave UDMA33
> Mounting root from ufs:/dev/ad0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021129005056.GA770>