Date: Sat, 4 Nov 2000 20:01:19 +0100 From: Wilko Bulte <wkb@freebie.demon.nl> To: FreeBSD-alpha mailing list <freebsd-alpha@freebsd.org> Cc: ken@freebsd.org, justin@freebsd.org Subject: SCSI cdrom attach problems on 4-stable Message-ID: <20001104200119.A13502@freebie.demon.nl>
next in thread | raw e-mail | index | archive | help
Observed on my Miata, but also on a AS1000A at work: ppc0: interrupting at ISA irq 7 Timecounter "alpha" frequency 599870268 Hz Waiting 5 seconds for SCSI devices to settle isp0: 0.6 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.6 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.6 set current period 0xc offset 0x8 flags 0xd500 isp0: 0.0 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.0 set current period 0xc offset 0x8 flags 0xfd00 isp0: 0.1 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.1 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.1 set current period 0xc offset 0x8 flags 0xfd00 isp0: 0.2 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.2 get current period 0x19 offset 0x0 flags 0xc500 isp0: 0.2 set current period 0xc offset 0x8 flags 0xfd00 Mounting root from ufs:/dev/da1a da0 at isp0 bus 0 target 0 lun 0 da0: <SEAGATE ST34371W 0702> Fixed Direct Access SCSI-2 device isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C) da2 at isp0 bus 0 target 2 lun 0 da2: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device isp0: 0.2 get current period 0xc offset 0x8 flags 0xfd00 da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) da1 at isp0 bus 0 target 1 lun 0 da1: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device isp0: 0.1 get current period 0xc offset 0x8 flags 0xfd00 da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) (cd0:isp0:0:6:0): got CAM status 0x50 (cd0:isp0:0:6:0): fatal error, failed to attach to device (cd0:isp0:0:6:0): lost device (cd0:isp0:0:6:0): removing device entry WARNING: clock gained 6 days -- CHECK AND RESET THE DATE! dc0: TX underrun -- increasing TX threshold miata# miata#camcontrol devlist <SEAGATE ST34371W 0702> at scbus0 target 0 lun 0 (pass0,da0) <IBM DDRS-34560W S97B> at scbus0 target 1 lun 0 (pass1,da1) <IBM DDRS-39130D DC1B> at scbus0 target 2 lun 0 (pass2,da2) <DEC RRD46 (C) DEC 0557> at scbus0 target 6 lun 0 (pass3) miata# The AS1000A has a different cdrom drive (RRD46) but I also tested a RRD46 on it which caused the same 'lack of attach'. This is annoying at best. Sometimes a 'camcontrol rescan' will cause 'cd' to attach. Wilko -- Wilko Bulte Arnhem, the Netherlands wilko@freebsd.org http://www.freebsd.org http://www.nlfug.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001104200119.A13502>