Date: Thu, 23 Apr 2009 23:20:15 +0200 From: =?ISO-8859-1?Q?Fernando_Apestegu=EDa?= <fernando.apesteguia@gmail.com> To: Daniel Underwood <djuatdelta@gmail.com> Cc: =?ISO-8859-1?Q?Patrick_Lamaizi=E8re?= <patfbsd@davenulle.org>, freebsd-questions@freebsd.org Subject: Re: FreeBSD and Intel PRO/Wireless 2200BG Message-ID: <1bd550a00904231420m27f0e187kb8267c70056cf900@mail.gmail.com> In-Reply-To: <b6c05a470904221654i43d3540cya0a84ccfd81344bf@mail.gmail.com> References: <b6c05a470904221204v23093c9di9cd38e826046d969@mail.gmail.com> <20090422225551.1cf1b52f@baby-jane.lamaiziere.net> <b6c05a470904221404h7c80263cl3ce20d41f3c81b5b@mail.gmail.com> <20090422234110.254367fa@baby-jane.lamaiziere.net> <b6c05a470904221515o3e5b3aaanc14898b2adf305a9@mail.gmail.com> <b6c05a470904221654i43d3540cya0a84ccfd81344bf@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
2009/4/23 Daniel Underwood <djuatdelta@gmail.com>: > [SOLVED] > > Thanks for the help, folks. It works fine now. I wasn't that lucky :) I'm using FreeBSD 7.1-RELEASE-p4 #12 This is my loader.conf configuration: legal.intel_iwi.license_ack=3D1 iwi_bss_load=3D"YES" iwi_ibss_load=3D"YES" iwi_monitor_load=3D"YES" And in my kernel config I have: device pci device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device wlan_scan_ap # 802.11 AP mode scanning device wlan_scan_sta # 802.11 STA mode scanning device iwi # For Intel Pro Wireless 2200bg device firmware # firmware assist module This is the output of ifconfig: iwi0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:0e:35:fd:aa:0f media: IEEE 802.11 Wireless Ethernet autoselect status: no carrier ssid "" channel 1 (2412 Mhz 11b) authmode OPEN privacy OFF bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 bintval 0 After seting debug.iwi=3D1 this is what I get when I try to bring the interface up: $ ifconfig iwi0 up iwi_newstate: INIT -> INIT flags 0x0 enter FW state 1 firmware_get: failed to load firmware image iwi_bss iwi0: could not load firmware exit FW state 1 iwi_newstate: INIT -> INIT flags 0x0 Any ideas? Thanks in advance. > > 2009/4/22 Daniel Underwood <djuatdelta@gmail.com>: >> Thanks Patrick. =A0After updating my /boot/loader.conf, it now contains: >> >> legal.intel_iwi.license_ack=3D1 >> iwi_bss_load=3D"YES" >> iwi_ibss_load=3D"YES" >> iwi_monitor_load=3D"YES" >> wlan_scan_ap_load=3D"YES" >> wlan_scan_sta_load=3D"YES" >> wlan_wep_load=3D"YES" >> wlan_tkip_load=3D"YES" >> wlan_ccmp_load=3D"YES" >> >> I no longer receive the error message about failing to load the >> firmware. However, when I enter "ifconfig iwi0 up scan", I receive the >> following in the xconsole: >> >> iwi0: firmware stuck in state4, resetting >> >> Any idea what that means, or what state4 is? =A0(Sorry, I'm very new to = FreeBSD.) >> >> Thanks, >> Daniel >> >> 2009/4/22 Patrick Lamaizi=E8re <patfbsd@davenulle.org>: >>> Le Wed, 22 Apr 2009 17:04:41 -0400, >>> Daniel Underwood <djuatdelta@gmail.com>: >>> >>>> After re-reading man iwi, I noticed that it says: >>>> >>>> "This driver requires firmware to be loaded before it will work. You >>>> need to obtain iwicontrol(8) =A0from the IWI web page listed below to >>>> accomplish loading the firmware before ifconfig(8) =A0will work." >>>> >>>> I'm going to look into this. Sounds like this may be the problem. Do >>>> you think so? >>> >>> No, before FreeBSD 7 you needed to download the firmware. >>> There is a port in /usr/ports/net/iwi-firmware but it is only for >>> FreeBSD < 7 >>> >>> You don't need anything on FreeBSD 7.x and you it seems you are not >>> using the right manual page for 7.1: >>> http://www.freebsd.org/cgi/man.cgi?query=3Diwi&manpath=3DFreeBSD+7.1-RE= LEASE&format=3Dhtml >>> >>> Regards. >>> >> > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1bd550a00904231420m27f0e187kb8267c70056cf900>