Date: Thu, 02 Jul 2009 18:36:21 -0400 From: John Baldwin <jhb@FreeBSD.org> To: Maxim Ignatenko <gelraen.ua@gmail.com> Cc: Anonymous <swell.k@gmail.com>, Hans Ottevanger <hansot@iae.nl>, Norikatsu Shigemura <nork@freebsd.org>, Robert Noland <rnoland@freebsd.org>, freebsd-current@freebsd.org Subject: Re: panic on acpi_cpu_c1() Message-ID: <4A4D3665.3060502@FreeBSD.org> In-Reply-To: <ac42db050906281344u23754cb6i66b523be8c255307@mail.gmail.com> References: <20090628034654.bdb728c4.nork@FreeBSD.org> <4A47A681.3040100@iae.nl> <86bpo8b3y8.fsf@gmail.com> <1246220306.1759.43.camel@balrog.2hip.net> <ac42db050906281344u23754cb6i66b523be8c255307@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Maxim Ignatenko wrote: >> Fatal trap 30: reserved (unknown) fault while in kernel mode >> cpuid = 3; apic id = 03 >> instruction pointer = 0x20:0xffffffff804bce56 >> stack pointer = 0x20:0xffffff8000039b60 >> frame pointer = 0x20:0xffffff8000039b70 >> code segment = base 0x0, limit 0xfffff, type 0x1b >> = DPL 0, pres 1, long 1, def32 0, gran 1 >> processor eflags = interrupt enabled, IOPL = 0 >> current process = 11 (idle: cpu3) >> [thread pid 11 tid 100003 ] >> Stopped at acpi_cpu_c1+0x6: leave >> db> bt >> Tracing pid 11 tid 100003 td 0xffffff8001863720 >> acpi_cpu_c1() at acpi_cpu_c1+0x6 >> acpi_cpu_idle() at acpi_cpu_idle+0x20c >> sched_idletd() at sched_idletd+0x123 >> fork_exit() at fork_exit+0x117 >> fork_trampoline() at fork_trampoline+0xe > > As for me, r194984 runs normally, but when I tried to boot with > r194985 at second try it paniced with backtrace very similar to shown > in first message, and at first try even earlier: in sched_ideltd and > again on instruction that uses %ebp when ebp = 0. > First time I stepped on this panic after updating to r195130: > > Trying to mount root from ufs:/dev/ufs/root > > > Fatal trap 30; reserved (unknown) fault while in kernel mode > cpuid = 1; apic id = 01 > instruction ponter = 0x20:0xc09252c5 > stack pointer = 0x28:0xc4ecec94 > frame pointer = 0x28:0xc4ecec94 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, IOPL = 0 > current process = 11 (idle: cpu1) > [thread pid 11 tid 100003] > Stopped at 0xc09252c5 = acpi_cpu_c1+0x5: popl %ebp > db> bt > Tracing pid 11 tid 100003 td 0xc5176af0 > acpi_cpu_c1(1,c4ececa8,1,0,c4ececc0,...) at 0xc09252c5 = acpi_cpu_c1+0x5 > acpi_cpu_idle(c4ececd4,c093c0ab,0,c4ececf4,c066fdec,...) at 0xc04acf37 > = acpi_cpu_idle+0x107 > cpu_idle_acpi(0,c4ececf4,c066fdec,0,0,...) at 0xc093d5bb = cpu_idle_acpi+0x1b > cpu_idle(0,0,c5176af0,c4ececf4,202,...) at 0xc093c0ab = cpu_idle+0x1b > sched_idletd(0,c4ececd38,a4108400,2c0a0e,7022d00,...) at 0xc066fdec = > sched_idletd+0x1c > fork_exit(c066fdd0,0,c4eced38) at 0xc0623aa1 = fork_exit+0x91 > fork_trampoline() at 0xc0930c80 = fork_tramoline+0x8 > --- trap 0, eip = 0, esp = 0xc4ececd70, ebp = 0 --- > > > P.S.: i386, dual-core, drm and radeon compiled as modules > When I'm trying to boot w/o ACPI support all seems work fine, but > system hangs just before starting kdm Please try http://www.FreeBSD.org/~jhb/patches/msi_assign.patch -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A4D3665.3060502>