Date: Thu, 27 Jan 2000 10:34:51 -0500 From: "Adam" <ajwoodbe@oakland.edu> To: "freebsd-questions" <freebsd-questions@FreeBSD.ORG> Subject: Problems getting PPP to work. Please help. Message-ID: <NDBBLEIJALJKACDMNFLJAECNCAAA.ajwoodbe@oakland.edu>
next in thread | raw e-mail | index | archive | help
I've been playing around with FreeBSD 3.4 this morning trying to get PPP to work correctly. I've followed the instructions in the ppp man page as well as the part of the handbook dealing with PPP. In following those instructions, I've been able to make a ppp connection (where the ppp changes to PPP at the prompt) but I am unable to do anything beyond that. In the handbook, under the section dealing with PPP configuration, it mentions issuing the command "~p" to enter packet mode. I must be an idiot because I do not know the combination of keys to issue this command. I tried typing ~p at the PPP command prompt and PPP complained about an illegal command. So basically, I'm able to connect to my ISP but I am unable to ping anything. Any help would be greatly appreciated. Below is various configuration files and logs that I am using. My modem is on COM1 (cuaa0). Please let me know if any more information would be helpful. Adam ********************************************************** host.conf: ********************************************************** # $FreeBSD: src/etc/host.conf,v 1.5.2.1 1999/08/29 14:18:44 peter Exp $ # First try the /etc/hosts file hosts # Now try the nameserver next. bind # If you have YP/NIS configured, uncomment the next line # nis ********************************************************** resolv.conf: ********************************************************** nameserver 141.210.10.15 nameserver 141.210.10.25 ********************************************************** Output of netstat -nr before PPP is connected. ********************************************************** Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 127.0.0.1 127.0.0.1 UH 0 0 lo0 192.168.1 link#1 UC 0 0 xl0 ********************************************************** Output of netstat -nr after PPP is connected. ********************************************************** Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 141.210.21.52 UGSc 0 0 tun0 127.0.0.1 127.0.0.1 UH 0 0 lo0 141.210.21.52 141.210.16.31 UH 1 0 tun0 192.168.1 link#1 UC 0 0 xl0 192.168.1.2 link#1 UHLW 0 0 xl0 ********************************************************** ppp.conf: ********************************************************** ################################################################# # PPP Sample Configuration File # Originally written by Toshiharu OHNO # Simplified 5/14/1999 by wself@cdrom.com # # $FreeBSD: src/etc/ppp/ppp.conf,v 1.1.2.2 1999/08/29 14:19:56 peter Exp $ ################################################################# default: # # Make sure that "device" references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) # set device /dev/cuaa0 set log Phase Chat LCP IPCP CCP tun command set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set timeout 120 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns ou: set phone "2091001" set authname <hidden> set authkey <hidden> set login "TIMEOUT 10 \"\" \"\" gin:--gin: <hidden> word: <hidden>" set timeout 300 set ifaddr 192.168.1.1/0 192.168.1.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns papchap: # # edit the next three lines and replace the items in caps with # the values which have been assigned by your ISP. # set phone 2091001 set authname <hidden> set authkey <hidden> ********************************************************** ppp.log: ********************************************************** Jan 27 09:14:57 w00d ppp[1957]: Phase: Using interface: tun0 Jan 27 09:14:57 w00d ppp[1957]: Phase: deflink: Created in closed state Jan 27 09:14:57 w00d ppp[1957]: tun0: Command: default: set speed 115200 Jan 27 09:14:57 w00d ppp[1957]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Jan 27 09:14:57 w00d ppp[1957]: tun0: Command: default: set timeout 120 Jan 27 09:14:57 w00d ppp[1957]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Jan 27 09:14:57 w00d ppp[1957]: tun0: Command: default: add default HISADDR Jan 27 09:14:57 w00d ppp[1957]: tun0: Command: default: enable dns Jan 27 09:14:57 w00d ppp[1957]: tun0: Phase: PPP Started (interactive mode). Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: /dev/tty: dial ou Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: set phone 2091001 Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: set authname <hidden> Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: set authkey <hidden> Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: set login TIMEOUT 10 "" "" gin:--gin: <hidden> word: <hidden> Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: set timeout 300 Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: set ifaddr 192.168.1.1/0 192.168.1.2/0 255.255.255.0 0.0.0.0 Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: add default HISADDR Jan 27 09:14:59 w00d ppp[1957]: tun0: Command: ou: enable dns Jan 27 09:14:59 w00d ppp[1957]: tun0: Phase: bundle: Establish Jan 27 09:14:59 w00d ppp[1957]: tun0: Phase: deflink: closed -> opening Jan 27 09:14:59 w00d ppp[1957]: tun0: Phase: deflink: Connected! Jan 27 09:14:59 w00d ppp[1957]: tun0: Phase: deflink: opening -> dial Jan 27 09:14:59 w00d ppp[1957]: tun0: Phase: Phone: 2091001 Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: deflink: Dial attempt 1 of 1 Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Send: AT^M Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Expect(5): OK Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Received: AT^M^M Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Received: OK^M Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Send: ATE1Q0^M Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Expect(5): OK Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Received: ATE1Q0^M^M Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Received: OK^M Jan 27 09:14:59 w00d ppp[1957]: tun0: Chat: Send: ATDT2091001^M Jan 27 09:15:01 w00d ppp[1957]: tun0: Chat: Expect(40): CONNECT Jan 27 09:15:26 w00d ppp[1957]: tun0: Chat: Received: ATDT2091001^M^M Jan 27 09:15:26 w00d ppp[1957]: tun0: Chat: Received: CONNECT 45333/ARQ/V90/LAPM/V42BIS^M Jan 27 09:15:26 w00d ppp[1957]: tun0: Phase: deflink: dial -> carrier Jan 27 09:15:27 w00d ppp[1957]: tun0: Phase: deflink: /dev/cuaa0: CD detected Jan 27 09:15:27 w00d ppp[1957]: tun0: Phase: deflink: carrier -> login Jan 27 09:15:27 w00d ppp[1957]: tun0: Chat: Send: ^M Jan 27 09:15:27 w00d ppp[1957]: tun0: Chat: Expect(10): gin: Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: ^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: ^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: OUnet Portmaster pm04-nfh^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: Please log in using username@oakland.edu then use your Vela password.^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: ^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: ^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: login:^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Send: <hidden>^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Expect(10): word: Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: login:<hidden>^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Received: Password: Jan 27 09:15:28 w00d ppp[1957]: tun0: Chat: Send: <hidden>^M Jan 27 09:15:28 w00d ppp[1957]: tun0: Phase: deflink: login -> lcp Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: FSM: Using "deflink" as a transport Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: State change Initial --> Closed Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: State change Closed --> Stopped Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: RecvConfigReq(1) state = Stopped Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: MAGICNUM[6] 0xd9fb013b Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: PROTOCOMP[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: ACFCOMP[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: ACFCOMP[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: PROTOCOMP[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: MRU[4] 1500 Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: MAGICNUM[6] 0x723a6e19 Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: SendConfigAck(1) state = Stopped Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: ACCMAP[6] 0x00000000 Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: MAGICNUM[6] 0xd9fb013b Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: PROTOCOMP[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: ACFCOMP[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: LayerStart Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: State change Stopped --> Ack-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: State change Ack-Sent --> Opened Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: LayerUp Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: Using trigger address 0.0.0.0 Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: FSM: Using "deflink" as a transport Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: deflink: State change Initial --> Closed Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: deflink: LayerStart. Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: deflink: SendConfigReq(1) state = Closed Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: DEFLATE[4] win 15 Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: PRED1[2] Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: deflink: State change Closed --> Req-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: Phase: deflink: lcp -> open Jan 27 09:15:28 w00d ppp[1957]: tun0: Phase: bundle: Network Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: FSM: Using "deflink" as a transport Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: State change Initial --> Closed Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: LayerStart. Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: IPADDR[6] 0.0.0.0 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: PRIDNS[6] 141.210.10.15 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: SECDNS[6] 141.210.10.25 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: State change Closed --> Req-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: RecvConfigReq(1) state = Req-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: IPADDR[6] 141.210.21.52 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: SendConfigAck(1) state = Req-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: IPADDR[6] 141.210.21.52 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: RecvProtocolRej(2) state = Opened Jan 27 09:15:28 w00d ppp[1957]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) was rejected! Jan 27 09:15:28 w00d ppp[1957]: tun0: CCP: deflink: State change Req-Sent --> Stopped Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: RecvConfigNak(1) state = Ack-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: IPADDR[6] 141.210.16.33 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 141.210.16.33 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: SendConfigReq(2) state = Ack-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: IPADDR[6] 141.210.16.33 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: PRIDNS[6] 141.210.10.15 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: SECDNS[6] 141.210.10.25 Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: State change Ack-Sent --> Opened Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: deflink: LayerUp. Jan 27 09:15:28 w00d ppp[1957]: tun0: IPCP: myaddr 141.210.16.33 hisaddr = 141.210.21.52 Jan 27 09:18:05 w00d ppp[1957]: tun0: Command: /dev/tty: down Jan 27 09:18:05 w00d ppp[1957]: tun0: CCP: deflink: State change Stopped --> Closed Jan 27 09:18:05 w00d ppp[1957]: tun0: CCP: deflink: State change Closed --> Initial Jan 27 09:18:05 w00d ppp[1957]: tun0: LCP: deflink: LayerDown Jan 27 09:18:05 w00d ppp[1957]: tun0: LCP: deflink: State change Opened --> Starting Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: open -> lcp Jan 27 09:18:05 w00d ppp[1957]: tun0: LCP: deflink: LayerFinish Jan 27 09:18:05 w00d ppp[1957]: tun0: LCP: deflink: State change Starting --> Initial Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: deflink: LayerDown: 141.210.16.33 Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: Using trigger address 0.0.0.0 Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: deflink: State change Opened --> Starting Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: deflink: LayerFinish. Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: Connect time: 157 secs: 252 octets in, 0 octets out Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: total 1 bytes/sec, peak 50 bytes/sec on Thu Jan 27 09:18:05 2000 Jan 27 09:18:05 w00d ppp[1957]: tun0: IPCP: deflink: State change Starting --> Initial Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: bundle: Terminate Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: Disconnected! Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: lcp -> logout Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: Disconnected! Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: logout -> hangup Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: Connect time: 186 secs: 589 octets in, 206 octets out Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: total 4 bytes/sec, peak 105 bytes/sec on Thu Jan 27 09:18:05 2000 Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: deflink: hangup -> closed Jan 27 09:18:05 w00d ppp[1957]: tun0: Phase: bundle: Dead To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NDBBLEIJALJKACDMNFLJAECNCAAA.ajwoodbe>