Date: Wed, 20 Dec 2000 16:44:28 +1100 From: Andrew Johns <johnsa@kpi.com.au> To: freebsd-questions@freebsd.org Subject: Dial-in to 3.3 box fails Message-ID: <3A40473C.B5505076@kpi.com.au>
next in thread | raw e-mail | index | archive | help
Hi, I have a box which has 2 dial out modems for a small WAN and I want to add 1 dial-in line for a roaming user. The system works perfectly with the dial-out lines, connecting to 2 other 3.3 RELEASE boxes. However, the dial-in luser is using Win98 and despite my best efforts, I cannot get it going. It does not get past LCP negotiation it seems - see the trimmed ppp log at the end - the HDLC guff really blows it out. I can provide the HDLC and even physical traces as well if that helps. TIA -- Regards ******************************************************************** Andrew Johns BSc | http://www.kpi.com.au Principal Consultant | Tel.: +61-3-6224-8779 / 1300 133KPI KPI Logistics Pty Ltd | Fax.: +61-3-6224-7199 johnsa@kpi.com.au | 1 Franklin Wharf, Hobart, Australia 7000 ******************************************************************** FreeBSD - The power to serve (it up to M$) ppp.log 16:19:57 tun0: Command: incoming: enable chap 16:19:57 tun0: Command: incoming: deny chap 16:19:57 tun0: Command: incoming: disable pap 16:19:57 tun0: Command: incoming: deny pap 16:19:57 tun0: Command: incoming: enable dns 16:19:57 tun0: Command: incoming: set timeout 0 16:19:57 tun0: Command: incoming: set openmode passive 16:19:57 tun0: Command: incoming: set ifaddr 10.0.0.207/0 10.0.0.7/0 16:19:57 tun0: Command: incoming: set log physical CCP HDLC Phase Chat LCP IPCP tun command arning alert 16:19:57 tun0: Phase: PPP Started (direct mode). 16:19:57 tun0: Phase: bundle: Establish 16:19:57 tun0: Phase: deflink: closed -> opening 16:19:57 tun0: Phase: deflink: Connected! 16:19:57 tun0: Phase: deflink: opening -> lcp 16:19:57 tun0: LCP: FSM: Using "deflink" as a transport 16:19:57 tun0: LCP: deflink: State change Initial --> Closed 16:19:57 tun0: LCP: deflink: State change Closed --> Stopped 16:20:00 tun0: LCP: deflink: RecvConfigReq(2) state = Stopped 16:20:00 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:00 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:00 tun0: LCP: PROTOCOMP[2] 16:20:00 tun0: LCP: ACFCOMP[2] 16:20:00 tun0: LCP: CALLBACK[3] CBCP 16:20:00 tun0: LCP: deflink: SendConfigReq(1) state = Stopped 16:20:00 tun0: LCP: ACFCOMP[2] 16:20:00 tun0: LCP: PROTOCOMP[2] 16:20:00 tun0: LCP: ACCMAP[6] 0x00000000 16:20:00 tun0: LCP: MRU[4] 1500 16:20:00 tun0: LCP: MAGICNUM[6] 0x3cfa1cc7 16:20:00 tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) 16:20:00 tun0: LCP: deflink: SendConfigRej(2) state = Stopped 16:20:00 tun0: LCP: CALLBACK[3] CBCP 16:20:00 tun0: LCP: deflink: LayerStart 16:20:00 tun0: LCP: deflink: State change Stopped --> Req-Sent 16:20:02 tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent 16:20:02 tun0: LCP: ACFCOMP[2] 16:20:02 tun0: LCP: PROTOCOMP[2] 16:20:02 tun0: LCP: ACCMAP[6] 0x00000000 16:20:02 tun0: LCP: MRU[4] 1500 16:20:02 tun0: LCP: MAGICNUM[6] 0x3cfa1cc7 16:20:02 tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) 16:20:03 tun0: LCP: deflink: RecvConfigReq(3) state = Req-Sent 16:20:03 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:03 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:03 tun0: LCP: PROTOCOMP[2] 16:20:03 tun0: LCP: ACFCOMP[2] 16:20:03 tun0: LCP: CALLBACK[3] CBCP 16:20:03 tun0: LCP: deflink: SendConfigRej(3) state = Req-Sent 16:20:03 tun0: LCP: CALLBACK[3] CBCP 16:20:05 tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent 16:20:05 tun0: LCP: ACFCOMP[2] 16:20:05 tun0: LCP: PROTOCOMP[2] 16:20:05 tun0: LCP: ACCMAP[6] 0x00000000 16:20:05 tun0: LCP: MRU[4] 1500 16:20:05 tun0: LCP: MAGICNUM[6] 0x3cfa1cc7 16:20:05 tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) 16:20:06 tun0: LCP: deflink: RecvConfigReq(4) state = Req-Sent 16:20:06 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:06 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:06 tun0: LCP: PROTOCOMP[2] 16:20:06 tun0: LCP: ACFCOMP[2] 16:20:06 tun0: LCP: CALLBACK[3] CBCP 16:20:06 tun0: LCP: deflink: SendConfigRej(4) state = Req-Sent 16:20:06 tun0: LCP: CALLBACK[3] CBCP 16:20:08 tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent 16:20:08 tun0: LCP: ACFCOMP[2] 16:20:08 tun0: LCP: PROTOCOMP[2] 16:20:08 tun0: LCP: ACCMAP[6] 0x00000000 16:20:08 tun0: LCP: MRU[4] 1500 16:20:08 tun0: LCP: MAGICNUM[6] 0x3cfa1cc7 16:20:08 tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) 16:20:09 tun0: LCP: deflink: RecvConfigReq(5) state = Req-Sent 16:20:09 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:09 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:09 tun0: LCP: PROTOCOMP[2] 16:20:09 tun0: LCP: ACFCOMP[2] 16:20:09 tun0: LCP: deflink: SendConfigAck(5) state = Req-Sent 16:20:09 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:09 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:09 tun0: LCP: PROTOCOMP[2] 16:20:09 tun0: LCP: ACFCOMP[2] 16:20:09 tun0: LCP: deflink: State change Req-Sent -->Ack-Sent 16:20:11 tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent 16:20:11 tun0: LCP: ACFCOMP[2] 16:20:11 tun0: LCP: PROTOCOMP[2] 16:20:11 tun0: LCP: ACCMAP[6] 0x00000000 16:20:11 tun0: LCP: MRU[4] 1500 16:20:11 tun0: LCP: MAGICNUM[6] 0x3cfa1cc7 16:20:11 tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) 16:20:12 tun0: LCP: deflink: RecvConfigReq(6) state = Ack-Sent 16:20:12 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:12 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:12 tun0: LCP: PROTOCOMP[2] 16:20:12 tun0: LCP: ACFCOMP[2] 16:20:12 tun0: LCP: deflink: SendConfigAck(6) state = Ack-Sent 16:20:12 tun0: LCP: ACCMAP[6] 0x000a0000 16:20:12 tun0: LCP: MAGICNUM[6] 0x00bd52d0 16:20:12 tun0: LCP: PROTOCOMP[2] 16:20:12 tun0: LCP: ACFCOMP[2] 16:20:14 tun0: LCP: deflink: LayerFinish 16:20:14 tun0: LCP: deflink: State change Ack-Sent --> Stopped 16:20:14 tun0: LCP: deflink: State change Stopped --> Closed 16:20:14 tun0: LCP: deflink: State change Closed --> Initial 16:20:14 tun0: Phase: deflink: Disconnected! 16:20:14 tun0: Phase: deflink: Connect time: 17 secs: 297 octets in, 467 octets out 16:20:14 tun0: Phase: total 44 bytes/sec, peak 61 bytes/sec on Wed Dec 20 16:20:14 2000 16:20:15 tun0: Phase: 326 -> 598: Dropped session control 16:20:15 tun0: Phase: deflink: lcp -> closed 16:20:15 tun0: Phase: bundle: Dead 16:20:15 tun0: Phase: PPP Terminated (normal). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A40473C.B5505076>