Date: Fri, 13 Mar 2009 07:23:43 +0100 From: =?ISO-8859-1?Q?Olivier_Cochard=2DLabb=E9?= <olivier@freenas.org> To: freebsd-current@freebsd.org Subject: Is iwn drivers working on Current ? Message-ID: <3131aa530903122323n73b671b5y4cb4a4a8896efa14@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I try to use the iwn drivers on my Dell Latitude D630 laptop on a
up-to-date current, but I can't.
I've an Intel 4965AGN card, and here is the result of pciconf -lv :
iwn0@pci0:12:0:0: class=3D0x028000 card=3D0x11218086 chip=3D0x42298086
rev=3D0x61 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D 'Intel 4965AGN Intel Wireless WiFi Link
4965AGN(supporting 802.11a/b/g/Draft-N)'
class =3D network
I've put on /boot/loader.conf the magics lines:
legal.intel_iwn.license_ack=3D1
if_iwn_load=3D"YES"
my /etc/rc.conf is configured like that:
wlans_iwn0=3D"wlan0"
ifconfig_wlan0=3D"country FR WPA DHCP"
and the /etc/wpa_supplicant.conf was tested using 2 others differents
wirelles card (USB rum and PCMCIA=A0ath) without problem.
But I have this error message on dmesg:
iwn0: need multicast update callback
iwn0: error, INTR=3D2000000<SW_ERROR> STATUS=3D0x0
iwn0: error, INTR=3D2000000<SW_ERROR> STATUS=3D0x0
iwn0: iwn_config: configure command failed, error 35
iwn0: iwn_init_locked: could not configure device, error 35
iwn0: iwn_config: configure command failed, error 35
iwn0: iwn_init_locked: could not configure device, error 35
iwn0: iwn_transfer_firmware: timeout waiting for first alive notice, error =
35
iwn0: iwn_init_locked: could not load firmware, error 35
(The wireless switch is on the ON position, and this wireless works
when booting with Linux Ubuntu).
And not association possible...
Here are some other information:
[root@d630]~#ifconfig wlan0
wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 15=
00
ether 00:1d:e0:72:10:01
inet6 fe80::21d:e0ff:fe72:1001%wlan0 prefixlen 64 scopeid 0x7
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 13 (2472 Mhz 11g)
regdomain ETSI country F2 authmode WPA1+WPA2/802.11i privacy ON
deftxkey UNDEF txpower 30 bmiss 10 scanvalid 60 protmode CTS wme
roaming MANUAL
[root@d630]~#ifconfig wlan0 list scan
[root@d630]~#ifconfig wlan0 list caps
drivercaps=3D581e001<STA,TXPMGT,SHSLOT,SHPREAMBLE,MONITOR,WPA1,WPA2,WME>
[root@d630]~#uname -a
FreeBSD d630.freenas.org 8.0-CURRENT FreeBSD 8.0-CURRENT #14: Thu Mar
12 14:17:22 CET 2009
root@d630.freenas.org:/usr/obj/usr/src/sys/DellD630 amd64
[root@d630]~#wpa_supplicant -d -i wlan0 -c /etc/wpa_supplicant.conf
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
update_config=3D1
ctrl_interface=3D'/var/run/wpa_supplicant'
ap_scan=3D1
Priority group 19
id=3D0 ssid=3D'Gugus'
Initializing interface (2) 'wlan0'
Own MAC address: 00:1d:e0:72:10:01
wpa_driver_bsd_set_wpa: enabled=3D1
wpa_driver_bsd_set_wpa_internal: wpa=3D3 privacy=3D1
wpa_driver_bsd_del_key: keyidx=3D0
wpa_driver_bsd_del_key: keyidx=3D1
wpa_driver_bsd_del_key: keyidx=3D2
wpa_driver_bsd_del_key: keyidx=3D3
wpa_driver_bsd_set_countermeasures: enabled=3D0
wpa_driver_bsd_set_drop_unencrypted: enabled=3D1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan
to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Cached scan results are empty - not posting
Selecting BSS from priority group 19
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
ioctl[SIOCS80211, op 103, len 128]: Device not configured
Failed to initiate AP scan.
Does someone know where the problem is ?
Thanks for your help,
Olivier
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3131aa530903122323n73b671b5y4cb4a4a8896efa14>