Date: Mon, 12 Aug 2002 09:30:03 -0700 (PDT) From: Christian Brueffer <chris@unixpages.org> To: freebsd-doc@FreeBSD.org Subject: Re: docs/40951: Various fixes for the solid-state article Message-ID: <200208121630.g7CGU3Hp057839@freefall.freebsd.org>
index | next in thread | raw e-mail
The following reply was made to PR docs/40951; it has been noted by GNATS.
From: Christian Brueffer <chris@unixpages.org>
To: FreeBSD-gnats-submit@FreeBSD.ORG
Cc:
Subject: Re: docs/40951: Various fixes for the solid-state article
Date: Mon, 12 Aug 2002 18:34:44 +0000
Ok, here are two new patches which incorporate the sentence
Ceri Davies suggested.
The first one contains the actual fixes, the second one contains
whitespace fixes.
--- article.sgml Thu May 16 03:42:01 2002
+++ article.sgml.modified Mon Aug 12 18:06:27 2002
@@ -134,7 +134,7 @@
<para>First, all embedded FreeBSD systems that use flash memory as system
disk will be interested in memory disks and memory filesystems. Because
of the limited number of writes that can be done to flash memory, the
- disk and the filesystems no the disk will most likely be mounted
+ disk and the filesystems on the disk will most likely be mounted
read-only. In this environment, filesystems such as
<filename>/tmp</filename> and <filename>/var</filename> are mounted as
memory filesystems to allow the system to create logs and update
@@ -204,7 +204,7 @@
read-only. Remember that in <xref linkend="intro"> we detailed the
limitations of flash memory - specifically the limited write capability.
The importance of not mounting filesystems on flash media read-write,
- and the importance of not using a swap file cannot be overstated. A
+ and the importance of not using a swap file, cannot be overstated. A
swap file on a busy system can burn through a piece of flash media in
less than one year. Heavy logging or temporary file creation and
destruction can do the same. Therefore, in addition to removing the
@@ -290,7 +290,7 @@
by pressing the <keycap>w</keycap> key (this is a hidden option on
this screen). When presented with a menu to choose a boot manager,
take care to select <literal>None</literal> if you are using an
- M-Systems Disk-On-Chip. If you are using a ATA compatible compact
+ M-Systems Disk-On-Chip. If you are using an ATA compatible compact
flash card, you should choose the FreeBSD Boot Manager. Now press
the <keycap>q</keycap> key to quit the partition menu. You will be
shown the boot manager menu once more - repeat the choice you made
@@ -333,7 +333,7 @@
of the file from <literal>ESDI</literal> to
<literal>DOC2K</literal>. Next, regardless of whether you are using
Disk-On-Chip or ATA compatible compact flash media, you need to add
- an a: line at the end of the file. This <literal>a:</literal> line
+ an <literal>a:</literal> line at the end of the file. This <literal>a:</literal> line
should look like:</para>
<programlisting>a: <replaceable>123456</replaceable> 0 4.2BSD 0 0</programlisting>
@@ -546,14 +546,11 @@
your filesystems on the flash media. Since they are read-only, you
will need to temporarily mount them read-write using the mount syntax
shown in <xref linkend="ro-fs">. You should always remount those
- filesystems read-only when you are done with any maintenance - it is
- dangerous to leave them in read-write mode lest a process begin
- logging or otherwise writing regularly to the flash media and wearing
- it out over time.</para>
+ filesystems read-only when you are done with any maintenance - unnecessary writes to the flash media could considerably shorten its lifespan.</para>
<para>To make it possible to enter a ports directory and successfully
run <command>make install</command>, it is necessary for the file
- <filename>/var/db/port.mkversion</filename> to exist, and that it have
+ <filename>/var/db/port.mkversion</filename> to exist, and that it has
a correct date in it. Further, we must create a packages directory on
a non-memory filesystem that will keep track of our packages across
reboots. Because it is necessary to mount your filesystems as
@@ -599,7 +596,7 @@
<para>Apache keeps pid files and logs in
<filename><replaceable>apache_install</replaceable>/logs</filename>.
- Since this directory no doubt exists on a read-only filesystem, this
+ Since this directory, without a doubt, exists on a read-only filesystem, this
will not work. It is necessary to add a new directory to the
<filename>/etc/rc.diskless2</filename> list of directories to create
in <filename>/var</filename>, to link
--- article.sgml.fixes Mon Aug 12 18:22:46 2002
+++ article.sgml.whitespace Mon Aug 12 18:25:00 2002
@@ -333,8 +333,8 @@
of the file from <literal>ESDI</literal> to
<literal>DOC2K</literal>. Next, regardless of whether you are using
Disk-On-Chip or ATA compatible compact flash media, you need to add
- an <literal>a:</literal> line at the end of the file. This <literal>a:</literal> line
- should look like:</para>
+ an <literal>a:</literal> line at the end of the file. This
+ <literal>a:</literal> line should look like:</para>
<programlisting>a: <replaceable>123456</replaceable> 0 4.2BSD 0 0</programlisting>
@@ -546,7 +546,9 @@
your filesystems on the flash media. Since they are read-only, you
will need to temporarily mount them read-write using the mount syntax
shown in <xref linkend="ro-fs">. You should always remount those
- filesystems read-only when you are done with any maintenance - unnecessary writes to the flash media could considerably shorten its lifespan.</para>
+ filesystems read-only when you are done with any maintenance -
+ unnecessary writes to the flash media could considerably shorten its
+ lifespan.</para>
<para>To make it possible to enter a ports directory and successfully
run <command>make install</command>, it is necessary for the file
@@ -596,8 +598,8 @@
<para>Apache keeps pid files and logs in
<filename><replaceable>apache_install</replaceable>/logs</filename>.
- Since this directory, without a doubt, exists on a read-only filesystem, this
- will not work. It is necessary to add a new directory to the
+ Since this directory, without a doubt, exists on a read-only filesystem,
+ this will not work. It is necessary to add a new directory to the
<filename>/etc/rc.diskless2</filename> list of directories to create
in <filename>/var</filename>, to link
<filename><replaceable>apache_install</replaceable>/logs</filename> to
- Christian
--
http://www.unixpages.org chris@unixpages.org
GPG Pub-Key : www.unixpages.org/cbrueffer.asc
GPG Fingerprint: 0DB5 8563 2473 C72A A8D1 56EA DAD2 B05D 5F3C 3185
GPG Key ID : DAD2B05D5F3C3185
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-doc" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200208121630.g7CGU3Hp057839>