Date: Fri, 02 Apr 1999 02:02:16 GMT From: john@T-F-I.freeserve.co.uk (John Murphy) To: questions@FreeBSD.ORG Subject: SoundBlaster AWE64 Config problem Message-ID: <37062506.14264126@smtp.freeserve.net>
next in thread | raw e-mail | index | archive | help
Andrew Johns wrote> >As you can see from the mknod lines (above) there are several >devices created, but none are named snd0. They are mixer0, >sequencer0, midi0, etc. The 0 corresponds to the card - if >you had two cards it would be sh MAKEDEV snd1 and it would >create mixer1, sequencer1, etc. Get the picture? > >HTH I was puzzled by this too. It's clear now thanks Andrew. rick hamell wrote> >I think what is really my problem though, boot.conf was=20 >not there before I made it, the instructions say to put load -userconfig= =20 >etc BEFORE autoboot... I can't seem to find anything on boot.conf....:( > Do you get the same sort of dmesg as Mike Harlan gets? Specifically the > Preloaded elf kernel "kernel" at 0xf02c0000. if you're using lower than 3.1 you have to add the pnp stuff manually by stopping the boot with -c then type each line _carefully_. I'm running 3.0 Release with a.out not ELF; and this is just another reason to = upgrade. Just a thought (I am a newbie). --=20 John. Why do I always forget to press escape to skip the memory test? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37062506.14264126>