Date: Mon, 27 Aug 2012 18:55:40 +0100 From: George Neville-Neil <gnn@neville-neil.com> To: John-Mark Gurney <jmg@funkthat.com> Cc: freebsd-arm@FreeBSD.org Subject: Re: Avila GW2348-4 and VLANs not working Message-ID: <1E1B5E39-A2FC-437D-A759-BF75B680EFC5@neville-neil.com> In-Reply-To: <20120827174004.GD58312@funkthat.com> References: <20120827174004.GD58312@funkthat.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Aug 27, 2012, at 18:40 , John-Mark Gurney <jmg@funkthat.com> wrote: > Over the weekend, I tried to update my board to support VLANs, and when > I did, things didn't go so well. I have 9.0-PRERELEASE installed on it, > but the npe driver hasn't changed much since then, so I'm not sure updating > will fix things... > > When I tried to run VLANs on the board, things didn't work. When I > tcpdump'd the base interface, I got a ton of truncated-ip messages... > Some of the packets that were suppose to be on a vlan didn't appear to > have a vlan tag on the npe0 interface... I previously used the same > switch w/ an older x86 box and vlans worked fine, though on a much > older FreeBSD release... > > I've attached the dmesg.boot... iirc, the modifications to the source > were some things to make pf usable, but that's about it... > > Any ideas what needs to be done to make vlans work? > > P.S. Since I only have one board, and I'm using this as a firewall > experimenting is a little difficult. Anyone know of a another good > ARM board that I could use (and isn't too expensive)? I'm a fan of the BeagleBone, which works with FreeBSD, and is about $89. http://beagleboard.org/buy Rasberry Pis are cheap but impossible to come by. Best, George
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1E1B5E39-A2FC-437D-A759-BF75B680EFC5>