Date: Thu, 11 Nov 1999 21:16:43 -0500 From: Arthur <wyshbone@panix.com> To: questions@freebsd.org Subject: FBSD 3.2 - Problems with zip drive Message-ID: <19991111211642.A264@wyshbone.panix.com>
next in thread | raw e-mail | index | archive | help
I'm a bit new to unix and freebsd, so if I get anyhting wrong feel
free to correct me. I'm running 3.2; I've got 2 parallel ports, one
of which has an external zip drive connected to it. I've been thru
The Complete FreeBSD, 3rd edition, the faq, the handbook and any
other documentation I could find. I've also searched deja.com but
I just can't seem to get this damn zip to work.
In my kernal I have:
controller scbus0
device da0
controller ppbus0
controller vp0
device lpt0 at ppbus?
device lpt1 at ppbus?
In /etc/fstab I have:
/dev/da0s4 /zip msdos rw,noauto 1 1
The mount point /zip does exist and there is a disk in the drive.
I realize this message may be a bit long, but I'm trying to make
sure I don't leave anything out. If anyone could help me get this
zip drive to work, or at least point me in the right direction,
I would be grateful. dmesg output follows.
Thanks
dmesg output is:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #27: Thu Nov 11 20:56:52 EST 1999
root@wyshbone.dialup.access.net:/usr/src/sys/compile/WYSHBONE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 132955181 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 100663296 (98304K bytes)
avail memory = 95293440 (93060K bytes)
Preloaded elf kernel "kernel" at 0xc026c000.
Probing for devices on PCI bus 0:
chip0: <Intel 82437FX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX Bus-master IDE controller> rev 0x02 on pci0.7.1
vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 0 on pci0.9.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL0043 [0x43008c0e] Serial 0x0000da4b Comp ID: PNP0600 [0x0006d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC36400L>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 1 (atapi): <ATAPI CDROM/V2.30>, removable, dma, iordy
acd0: drive speed 4153KB/sec, 120KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
NOTE! SB Pro support required with your soundcard!
snd0: <SoundBlaster 16 4.13>
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991111211642.A264>