Date: Fri, 12 Sep 2008 17:40:20 -0700 (PDT) From: Richard Mahlerwein <mahlerrd@yahoo.com> To: freebsd-questions@freebsd.org Subject: Disappearing Hard Drive? Message-ID: <112592.11513.qm@web51002.mail.re2.yahoo.com>
next in thread | raw e-mail | index | archive | help
I have a puzzling problem.=A0 I'm sure I just missed something simple, but = I can't figure out what. I added a drive to my system as Master on controller 2.=A0=A0 After turning= back on, I found I couldn't see that 80 GB drive on my system.=A0 I turned= it off, checked all settings, then turned it back on and verified that the= BIOS can see it - it's properly listed as an 80 GB Samsung as Master on 2.= =A0 It sounds normal, looks normal and I can feel it spin up. But I still don't see it on my system to mount it.=A0 I had just done this = process with a 40 GB drive and it worked just fine, so I knew that I knew h= ow to do it.=A0 That one showed up in dmesg and was easily mounted.=A0 For = what it's worth, my Linux desktop, when I hook this drive up to an oddball = USB-ATA adapter, acts exactly like it does with every OTHER drive I've pull= ed out of a FreeBSD box - it sees it but hasn't a clue how to mount it prop= erly.=A0 So I don't think the drive is a dud or anything.=A0 It was in use = until a few weeks ago. I will be verifying the drive is seen OK on another system shortly, but I'd= thought I'd throw this out there before then to see if anyone has any idea= s,. If someone would be so kind as to point me to some relevant help, I would g= reatly appreciate it.=A0 Please reply to me in addition to the list: I rece= ive the list in digest only. dmesg follows: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =A0=A0=A0=A0=A0=A0=A0 The Regents of the University of California. All righ= ts reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #0: Fri Sep=A0 5 02:34:20 CDT 2008 =A0=A0=A0 rich@mobius.mahlerwein.homeip.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz (1595.16-MHz 686-class CPU) =A0 Origin =3D "GenuineIntel"=A0 Id =3D 0xf12=A0 Stepping =3D 2 =A0 Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory=A0 =3D 536608768 (511 MB) avail memory =3D 511090688 (487 MB) ACPI APIC Table: <D850MV MV85010A> ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <D850MV MV85010A> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82850 host to AGP bridge> on hostb0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xff4e0000-0xff4fffff,0xf0000000-0xf3= ffffff,0xec000000-0xefffffff irq 16 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 fxp0: <Intel 82558 Pro/100 Ethernet> port 0xdf80-0xdf9f mem 0xf6aff000-0xf6= afffff,0xff900000-0xff9fffff irq 23 at device 11.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0:=A0 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:90:27:1b:5f:f7 fxp0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f i= rq 19 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f i= rq 23 at device 31.4 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered pci0: <multimedia, audio> at device 31.5 (no driver attached) cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x= 3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff pnpid ORM0= 000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub2: <vendor 0x0424 product 0x0140, class 9/0, rev 1.10/0.00, addr 2> on = uhub1 uhub2: 4 ports with 4 removable, self powered Timecounter "TSC" frequency 1595158208 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100 ad1: 238475MB <SAMSUNG SP2514N VF100-41> at ata0-slave UDMA100 Trying to mount root from ufs:/dev/ad0s1a Rich Mahlerwein mahlerrd@yahoo.com Mobile: 715-891-7420
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?112592.11513.qm>