Date: Fri, 22 Oct 2004 14:42:03 -0700 From: Mike Hunter <mhunter@ack.Berkeley.EDU> To: Chris Kramer <ck@gridway.net> Cc: freebsd-mobile@freebsd.org Subject: Re: Dell Latitude D800 (Xfree86) Message-ID: <20041022214203.GA7367@ack.Berkeley.EDU> In-Reply-To: <Pine.LNX.4.44.0410221333510.14895-100000@aqeutaq> References: <Pine.LNX.4.44.0410221333510.14895-100000@aqeutaq>
next in thread | previous in thread | raw e-mail | index | archive | help
On Oct 22, "Chris Kramer" wrote:
Hi,
> I have a new D800 with a NVidia GeForce 4200 Go Dell Mobile card and
> am having difficulty setting up my display. Could someone kindly
> point me in the right direction so I don't end up having to run
> Windose on my new laptop? =:-0
I am using the nvidia binary driver from /usr/ports/x11/nvidia-driver.
My XF86Config (comments stripped) is attached. It's set up to use the
builtin monitor but has code to export to my monitor.
Last but not least, my /boot/loader.conf:
linux_load="YES"
nvidia_load="YES"
machdep.disable_mtrrs="1"
#hw.nvidia.registry.ReqAGPRate="1"
debug.acpi.disable="lid"
acpi_dsdt_load="YES"
acpi_dsdt_name="/boot/DSDT.aml"
loader_color="YES"
I had to do the disable_mttrs or I'd get freeze-ups with the nvidia binary
driver.
Good luck!
Mike
==========================================
Section "Module"
Load "dbe" # Double buffer extension
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "bitmap"
Load "glx"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Emulate3Buttons"
EndSection
Section "Monitor"
Identifier "HP P910"
VendorName "Hewlett Packard"
ModelName "HP D8910"
HorizSync 29-107
VertRefresh 50-150
# 1024x768 @ 130 Hz, 106.8 kHz hsync
Modeline "1024x768" 150.6 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1280x1024 @ 100 Hz, 106.8 kHz hsync
Modeline "1280x1024" 181 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
EndSection
Section "Monitor"
Identifier "Onboard WUXGA"
Option "DPMS"
HorizSync 31.5-110
VertRefresh 28-90
Modeline "1920x1200" 162 1920 1984 2176 2480 1200 1201 1204 1250 +hsync +vsync
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
#VideoRam 65536
# Insert Clocks lines here if appropriate
#VideoRam 65536
# Insert Clocks lines here if appropriate
Section "Device"
Identifier "nVidia geForce 4"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "GeForce4 Go"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "nVidia geForce 4"
Monitor "Onboard WUXGA"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1920x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1920x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1920x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041022214203.GA7367>