Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 14 May 2000 02:11:06 +0200 (CEST)
From:      Dirk-Willem van Gulik <dirkx@webweaving.org>
To:        Bill Sommerfeld <sommerfeld@netbsd.org>, Atsushi Onoe <onoe@netbsd.org>
Cc:        freebsd-mobile@FreeBSD.ORG
Subject:   2 Mbit 803.11 wireles Farallon SkyLINE supported by awi(4)
Message-ID:  <Pine.BSF.4.05.10005140203580.1679-100000@kim.ispra.webweaving.org>

next in thread | raw e-mail | index | archive | help

Bill, Onoe,

Just to let you know; the following card works just fine with the awi(4),
it uses the 79c930 interface.

	Product:	2Mbit 803.11 DSS wireless pcmcia card
	Manufacturer:	Farallon
	Name:		SkyLINE

and wants to talk nicely to the Apple Airport and the BayStack 660. The
config setting is plain:

	card "Farallon" "SkyLINE Wireless"
		config	default "awi0" any
		insert	logger -s Farallon SkyLINE Wireless LAN inserted
		insert	/etc/pccard_ether $device
		remove	logger -s Farallon SkyLINE Wireless LAN removed
		remove	/etc/pccard_ether_remove $device

All this for FreeBSD-3.4-RELEASE.
 
Dw

Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000:  d9 03 ff
	Common memory device information:
		Device number 1, type Function specific, WPS = ON
		Speed = 250nS, Memory block size = 32Kb, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
    000:  01 d9 03 ff
	(MWAIT)
Tuple #3, code = 0x17 (Attribute memory descriptor), length = 3
    000:  d9 01 ff
	Attribute memory device information:
		Device number 1, type Function specific, WPS = ON
		Speed = 250nS, Memory block size = 2Kb, 1 units
Tuple #4, code = 0x1d (Other conditions for attribute memory), length = 4
    000:  01 d9 01 ff
	(MWAIT)
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
    000:  00 02 01 0a
	PCMCIA ID = 0x200, OEM ID = 0xa01
Tuple #6, code = 0x21 (Functional ID), length = 2
    000:  06 00
	Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
    000:  01 07
	Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
    000:  02 80 84 1e 00
	Network speed: 2 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 2
    000:  03 07
	Network media: 2.4 GHz
Tuple #10, code = 0x22 (Functional EXT), length = 8
    000:  04 06 00 00 c5 09 08 e3
	Network node ID: 00 00 c5 09 08 e3
Tuple #11, code = 0x22 (Functional EXT), length = 2
    000:  05 00
	Network connector: open connector standard
Tuple #12, code = 0x15 (Version 1 info), length = 29
    000:  05 20 46 61 72 61 6c 6c 6f 6e 00 53 6b 79 4c 49
    010:  4e 45 20 57 69 72 65 6c 65 73 73 00 ff
	Version = 5.32, Manuf = [Farallon], card vers = [SkyLINE Wireless]
Tuple #13, code = 0x1a (Configuration map), length = 5
    000:  01 02 00 08 03
	Reg len = 2, config register addr = 0x800, last config = 0x2
	Registers: XX------ 
Tuple #14, code = 0x1b (Configuration entry), length = 15
    000:  c1 01 9d 71 55 2e 2e 2d fc 14 26 10 ff ff 20
	Config index = 0x1(default)
	Interface byte = 0x1 (I/O)
	Vcc pwr:
		Nominal operating supply voltage: 5 x 1V
		Max current average over 1 second: 2.5 x 100mA
		Max current average over 10 ms: 2.5 x 100mA
		Power down supply current: 2.5 x 10mA
	Wait scale Speed = 1.2 x 10 us
	Card decodes 6 address lines, 8 Bit I/O only
		IRQ modes:
		IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
	Max twin cards = 0
	Misc attr: (Power down supported)
Tuple #15, code = 0xff (Terminator), length = 0
1 slots found



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10005140203580.1679-100000>