Date: 10 Aug 2003 00:21:19 -0400 From: Mike Bohan <bogin@yokels.org> To: freebsd-current@freebsd.org Subject: Problem with PS/2 mouse driver in XFree86 4.3.0 Message-ID: <1060489279.12815.26.camel@diesel>
next in thread | raw e-mail | index | archive | help
Hello, I have an Abit KT266 based motherboard and am having some trouble using the PS/2 mouse driver under XFree86. I have the protocol set to "auto", and the device set to /dev/psm0. This configuration has worked with this same Intellimouse in the past. The symptoms are that that when the mouse is moved, the cursor is only updated about once a second. After searching google, I found the following URL in which another person experienced the same problem (from freebsd-bugs). Apparently it only shows up on certain chipsets (VIA based). I tried several other PS/2 mice, to no avail (same outcome). My system is running a day old -current build, but this other fellow reported the problem in 5.0 (does not affect 4.x). I'm wondering if anyone else has experienced this problem, and if so, are there any work-arounds? I've attached my 'dmesg' output, in the hopes that the information will be of value. Thank you in advance! URL: http://lists.freebsd.org/pipermail/freebsd-bugs/2003-April/000426.html -Mike Bohan Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #3: Fri Aug 8 09:10:54 EDT 2003 root@censored:/usr/obj/usr/src/sys/CABOOSE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0424000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0424244. Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) processor (1333.91-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 268369920 (255 MB) avail memory = 256196608 (244 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA694 AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdef0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 8 INTA is routed to irq 10 pcib0: slot 9 INTA is routed to irq 5 pcib0: slot 11 INTA is routed to irq 10 agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) dc0: <ADMtek AN985 10/100BaseTX> port 0xd000-0xd0ff mem 0xef000000-0xef0003ff irq 10 at device 8.0 on pci0 dc0: Ethernet address: 00:04:5a:40:b5:0d miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: <LC82C115 PNIC II 10/100BaseTX> port 0xd400-0xd4ff mem 0xef001000-0xef0010ff irq 5 at device 9.0 on pci0 dc1: Ethernet address: 00:a0:cc:34:54:93 miibus1: <MII bus> on dc1 dcphy0: <Intel 21143 NWAY media interface> on miibus1 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc2: <82c169 PNIC 10/100BaseTX> port 0xd800-0xd8ff mem 0xef002000-0xef0020ff irq 10 at device 11.0 on pci0 dc2: Ethernet address: 00:a0:cc:d6:ea:b4 miibus2: <MII bus> on dc2 bmtphy0: <BCM5201 10/100baseTX PHY> on miibus2 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233A UDMA133 controller> port 0xdc00-0xdc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> Timecounter "TSC" frequency 1333905046 Hz Timecounters tick every 1.000 msec DUMMYNET initialized (011031) ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ad0: 39083MB <Maxtor 5T040H4> [79408/16/63] at ata0-master UDMA100 ad1: 29333MB <WDC WD307AA> [59598/16/63] at ata0-slave UDMA66 ad2: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-master UDMA100 ad3: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-slave UDMA100 Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1060489279.12815.26.camel>