Date: Sun, 18 Jan 2026 04:06:39 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: dim@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #27654 - Failure Message-ID: <656170446.1545.1768709199676@jenkins.ci.freebsd.org> In-Reply-To: <1175295222.1539.1768706147797@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #27654 (74cac745fe302b26ad22114f60735c8b73e90571) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27654/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27654/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27654/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 74cac745fe302b26ad22114f60735c8b73e90571 by dim: mxge(4): avoid clang 21 warning in NO-IP configuration The end of the build log: [...truncated 4.14 MiB...] epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [6.443s] sys/netinet/carp.py:TestCarp::test_source_mac_vrrp -> epair0a: Ethernet address: 58:9c:fc:10:e1:09 epair0b: Ethernet address: 58:9c:fc:10:8a:48 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [6.557s] sys/netinet/divert:ipdivert_ip_input_local_success -> epair0a: Ethernet address: 3a:d1:7d:1e:98:53 epair0b: Ethernet address: 2e:30:5b:96:ea:17 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.095s] sys/netinet/divert:ipdivert_ip_output_remote_success -> epair0a: Ethernet address: 0a:06:e3:40:cf:03 epair0b: Ethernet address: ee:0d:e9:34:e2:87 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.090s] sys/netinet/fibs:fibs_ifroutes1_success -> epair0a: Ethernet address: 58:9c:fc:10:e1:09 epair0b: Ethernet address: 58:9c:fc:10:8a:48 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.173s] sys/netinet/fibs_multibind_test:multibind_different_user_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.007s] sys/netinet/fibs_multibind_test:multibind_different_user_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.007s] sys/netinet/fibs_multibind_test:multibind_different_user_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.007s] sys/netinet/fibs_multibind_test:multibind_different_user_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp6 -> skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp6 -> skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw -> skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs) [0.006s] sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw6 -> skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs) [0.006s] sys/netinet/fibs_test:arpresolve_checks_interface_fib -> skipped: firewalls interfere with this test [0.126s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet -> tap0: Ethernet address: b2:23:8d:a6:65:c5 tap1: Ethernet address: 5e:54:5c:25:cf:e9 passed [0.140s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6 -> tap0: Ethernet address: ae:a3:c8:f4:33:e2 tap1: Ethernet address: 96:69:d5:3f:12:cb passed [0.143s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib -> tap0: Ethernet address: d6:e5:23:0f:bb:9e passed [0.125s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6 -> tap0: Ethernet address: ea:48:36:4f:46:a8 passed [0.118s] sys/netinet/fibs_test:same_ip_multiple_ifaces -> tap0: Ethernet address: 8e:0d:af:74:b7:5a tap1: Ethernet address: 4e:b0:3a:d4:a5:f7 tap2: Ethernet address: 62:d7:07:94:37:e4 tap3: Ethernet address: 56:39:61:b8:21:a0 passed [0.167s] sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0 -> tap0: Ethernet address: 12:53:26:4c:d7:3d tap1: Ethernet address: 4a:ed:8b:c5:f3:26 expected_failure: The test results in an ifconfig error and thus spuriously fails: atf-check failed; see the output of the test for details [0.103s] sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6 -> tap0: Ethernet address: f2:f7:4a:20:d5:3c tap1: Ethernet address: 32:0a:52:c6:e5:9d tap0: Ethernet address: 7a:b1:d8:03:46:bc tap1: Ethernet address: e2:d2:96:ac:78:cf passed [0.253s] sys/netinet/fibs_test:slaac_on_nondefault_fib6 -> skipped: firewalls interfere with this test [0.110s] sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet -> tap0: Ethernet address: ea:d3:76:5c:83:90 tap1: Ethernet address: b6:b8:35:66:ce:23 passed [0.132s] sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet_inet6 -> tap0: Ethernet address: 16:bf:c3:78:d6:27 tap1: Ethernet address: 96:41:dc:a9:0d:89 passed [0.135s] sys/netinet/fibs_test:udp_dontroute -> tap0: Ethernet address: de:a5:b8:d3:ae:17 tap1: Ethernet address: 22:df:cc:4b:fc:26 tap0: link state changed to UP tap0: link state changed to DOWN tap0: Ethernet address: d2:2e:2a:2a:63:e9 tap1: Ethernet address: ba:86:1f:21:d5:e3 tap1: link state changed to UP tap1: link state changed to DOWN passed [0.177s] sys/netinet/fibs_test:udp_dontroute6 -> tap0: Ethernet address: 1e:25:3a:b2:ff:93 tap1: Ethernet address: 46:d4:ff:94:e4:c9 tap0: link state changed to UP tap0: link state changed to DOWN tap0: Ethernet address: 5a:99:38:15:db:ca tap1: Ethernet address: a2:d0:6f:40:34:c2 tap1: link state changed to UP tap1: link state changed to DOWN passed [0.178s] sys/netinet/forward:fwd_ip_blackhole -> epair0a: Ethernet address: aa:c9:da:af:85:b7 epair0b: Ethernet address: 72:df:05:8f:86:e1 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: c6:4e:fa:64:77:54 epair1b: Ethernet address: 92:74:4e:84:ef:44 epair1a: link state changed to UP epair1b: link state changed to UP lo0: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1b: link state changed to DOWN epair1a: link state changed to DOWN passed [3.291s] sys/netinet/forward:fwd_ip_icmp_gw_fast_success -> epair0a: Ethernet address: a6:5b:43:1b:ad:d2 epair0b: Ethernet address: be:81:85:c7:27:03 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.143s] sys/netinet/forward:fwd_ip_icmp_gw_slow_success -> epair0a: Ethernet address: e2:da:92:29:61:f2 epair0b: Ethernet address: 66:7c:c0:eb:b1:cc epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.153s] sys/netinet/forward:fwd_ip_icmp_iface_fast_success -> epair0a: Ethernet address: 4a:6b:3c:85:2a:a0 epair0b: Ethernet address: 9e:9a:89:64:ec:56 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x30 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80cf1d68 stack pointer = 0x28:0xfffffe008bdedc80 frame pointer = 0x28:0xfffffe008bdedcf0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (epair_task) rdi: fffffe0082bf7a00 rsi: fffffe008bdedc98 rdx: 0000000000000001 rcx: 00000000000001c5 r8: 0000000000000002 r9: fffff801aaf043c0 rax: 0000000000000000 rbx: fffff8022b65ae00 rbp: fffffe008bdedcf0 r10: 0000000000000000 r11: 0000000000000001 r12: fffff80003956200 r13: fffff800197b3780 r14: fffff80003720480 r15: 0000000000000000 trap number = 12 panic: page fault cpuid = 1 time = 1768709196 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008bded9b0 vpanic() at vpanic+0x136/frame 0xfffffe008bdedae0 panic() at panic+0x43/frame 0xfffffe008bdedb40 trap_pfault() at trap_pfault+0x47c/frame 0xfffffe008bdedbb0 calltrap() at calltrap+0x8/frame 0xfffffe008bdedbb0 --- trap 0xc, rip = 0xffffffff80cf1d68, rsp = 0xfffffe008bdedc80, rbp = 0xfffffe008bdedcf0 --- bpf_mtap() at bpf_mtap+0x98/frame 0xfffffe008bdedcf0 ether_nh_input() at ether_nh_input+0x109/frame 0xfffffe008bdedd40 netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008bdedda0 ether_input() at ether_input+0xd5/frame 0xfffffe008bdede00 epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008bdede40 taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008bdedec0 taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008bdedef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008bdedf30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008bdedf30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 0 tid 100112 ] Stopped at kdb_enter+0x33: movq $0,0x11f4902(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 1 dynamic pcpu = 0xfffffe008d3c5180 curthread = 0xfffff800197b3780: pid 0 tid 100112 critnest 1 "epair_task" curpcb = 0xfffff800197b3cd0 fpcurthread = none idlethread = 0xfffff8010240c000: tid 100004 "idle: cpu1" self = 0xffffffff82611000 curpmap = 0xffffffff81da0480 tssp = 0xffffffff82611384 rsp0 = 0xfffffe008bdee000 kcr3 = 0x80000000025a3002 ucr3 = 0xffffffffffffffff scr3 = 0x191a37a18 gs32p = 0xffffffff82611404 ldt = 0xffffffff82611444 tss = 0xffffffff82611434 curvnet = 0xfffff801aaf043c0 spin locks held: db:0:kdb.enter.panic> reset Uptime: 48m56s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27654' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./auto-shutdown x ./disable-notyet-tests.sh x ./run-kyua.sh x ./disable-zfs-tests.sh x ./run.sh x ./disable-dtrace-tests.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins3876731949679321198.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '74cac745fe302b26ad22114f60735c8b73e90571', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../74cac745fe302b26ad22114f60735c8b73e90571/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?656170446.1545.1768709199676>