Date: Thu, 22 May 2003 13:52:10 -0400 (EDT) From: John Dhmioyrgos <jd@teq.org> To: freebsd-current@freebsd.org Subject: BCM5703 GigE ifs on Supermicro X5DL8-GG m/b not detected on5.1-BETA2 or 4.8 Message-ID: <0305221344090.-1077937148.pimpmail@mailhub>
next in thread | raw e-mail | index | archive | help
This is a Supermicro X5DL8-GG motherboard (ServerWorks GC-LE chipset) in a
Supermicro 7403L-8R box, with what they claim are onboard Broadcom 5703
GigE ifs. OS set to Other in BIOS (latest ver), ACPI/Hyperthreading on.
pciconf -l:
hostb0@pci0:0:0: class=0x060000 card=0x348015d9 chip=0x254c8086
rev=0x01 hdr=0x00
none0@pci0:0:1: class=0xff0000 card=0x348015d9 chip=0x25418086 rev=0x01
hdr=0x00
pcib1@pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01
hdr=0x01
pcib4@pci0:3:0: class=0x060400 card=0x00000000 chip=0x25458086 rev=0x01
hdr=0x01
uhci0@pci0:29:0: class=0x0c0300 card=0x348015d9 chip=0x24828086
rev=0x02 hdr=0x00
uhci1@pci0:29:1: class=0x0c0300 card=0x348015d9 chip=0x24848086
rev=0x02 hdr=0x00
uhci2@pci0:29:2: class=0x0c0300 card=0x348015d9 chip=0x24878086
rev=0x02 hdr=0x00
pcib7@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0x42 hdr=0x01
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24808086
rev=0x02 hdr=0x00
atapci0@pci0:31:1: class=0x01018a card=0x348015d9 chip=0x248b8086
rev=0x02 hdr=0x00
none1@pci0:31:3: class=0x0c0500 card=0x348015d9 chip=0x24838086
rev=0x02 hdr=0x00
none2@pci1:28:0: class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib2@pci1:29:0: class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
none3@pci1:30:0: class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib3@pci1:31:0: class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
ahd0@pci2:1:0: class=0x010000 card=0x00409005 chip=0x80109005 rev=0x03
hdr=0x00
ahd1@pci2:1:1: class=0x010000 card=0x00409005 chip=0x80109005 rev=0x03
hdr=0x00
em0@pci3:1:0: class=0x020000 card=0x11078086 chip=0x10088086 rev=0x02
hdr=0x00
em1@pci3:2:0: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01
hdr=0x00
em2@pci3:2:1: class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01
hdr=0x00
none4@pci4:28:0: class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib5@pci4:29:0: class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
none5@pci4:30:0: class=0x080020 card=0x348015d9 chip=0x14618086
rev=0x04 hdr=0x00
pcib6@pci4:31:0: class=0x060400 card=0x00000050 chip=0x14608086
rev=0x04 hdr=0x01
twe0@pci5:1:0: class=0x010400 card=0x100113c1 chip=0x100113c1 rev=0x01
hdr=0x00
ahd2@pci6:2:0: class=0x010000 card=0x005e9005 chip=0x801d9005 rev=0x10
hdr=0x00
ahd3@pci6:2:1: class=0x010000 card=0x005e9005 chip=0x801d9005 rev=0x10
hdr=0x00
none6@pci7:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27
hdr=0x00
dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA2 #0: Tue May 20 16:08:27 GMT 2003
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc071b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc071b2e4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2399327112 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073217536 (1023 MB)
avail memory = 1034964992 (987 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 29 entries at 0xc00fddf0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
ahd0: <Adaptec 39320 Ultra320 SCSI adapter> port
0x3000-0x30ff,0x3400-0x34ff mem 0xfb200000-0xfb201fff irq 12 at device 1.0
on pci2
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec 39320 Ultra320 SCSI adapter> port
0x3800-0x38ff,0x3c00-0x3cff mem 0xfb202000-0xfb203fff irq 12 at device 1.1
on pci2
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
0x4080-0x409f mem 0xfb300000-0xfb31ffff,0xfb320000-0xfb33ffff irq 12 at
device 1.0 on pci3
em0: Speed:100 Mbps Duplex:Full
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
0x4000-0x403f mem 0xfb340000-0xfb35ffff irq 12 at device 2.0 on pci3
em1: Speed:N/A Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port
0x4040-0x407f mem 0xfb360000-0xfb37ffff irq 12 at device 2.1 on pci3
em2: Speed:N/A Duplex:N/A
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.HLC_ -
AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: <base peripheral, interrupt controller> at device 28.0 (no driver
attached)
pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4
pci5: <ACPI PCI bus> on pcib5
twe0: <3ware Storage Controller> port 0x5000-0x500f mem
0xfb800000-0xfbffffff,0xfb500000-0xfb50000f irq 11 at device 1.0 on pci5
twe0: 4 ports, Firmware FE7X 1.05.00.036, BIOS BE7X 1.08.00.044
pci4: <base peripheral, interrupt controller> at device 30.0 (no driver
attached)
pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4
pci6: <ACPI PCI bus> on pcib6
ahd2: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x6000-0x60ff,0x6400-0x64ff mem 0xfc000000-0xfc001fff irq 11 at device 2.0
on pci6
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd3: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0x6800-0x68ff,0x6c00-0x6cff mem 0xfc002000-0xfc003fff irq 11 at device 2.1
on pci6
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f
irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f
irq 5 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xc9fff,0xc8000-0xc8fff,0xc0000-0xc7fff
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
twed0: <TwinStor, Normal> on twe0
twed0: 38165MB (78163312 sectors)
twe0: command interrupt
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ses0 at ahd2 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
ses1 at ahd3 bus 0 target 6 lun 0
ses1: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses1: 3.300MB/s transfers
ses1: SAF-TE Compliant Device
da0 at ahd1 bus 0 target 0 lun 0
da0: <Promise 8 Disk RAID5 1.10> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 400543MB (820312192 512 byte sectors: 255H 63S/T 51062C)
Mounting root from ufs:/dev/twed0s1a
At least the three Intel GigE cards work fine. If you need patches tested
or more info then please let me know.
regards,
John
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0305221344090.-1077937148.pimpmail>