Date: Thu, 15 Jun 1995 12:00:02 -0700 From: "matthew c. mead" <mmead@Glock.COM> To: freebsd-bugs Subject: bin/519: quotacheck: cannot allocate memory Message-ID: <199506151900.MAA05963@freefall.cdrom.com> In-Reply-To: Your message of Thu, 15 Jun 1995 14:53:41 -0400 <199506151853.OAA03296@Glock.COM>
index | next in thread | previous in thread | raw e-mail
>Number: 519
>Category: bin
>Synopsis: execution of quotacheck from /etc/rc fails
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs (FreeBSD bugs mailing list)
>State: open
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jun 15 12:00:01 1995
>Originator: matthew c. mead
>Organization:
Glock 'Em
Matthew C. Mead | Network Administration: Virginia Tech Center for
| Transportation Research -> mmead@ctr.vt.edu
mmead@Glock.COM | Network Administration and Software Development
http://www.Glock.COM/~mmead/ | Consulting: BizNet Technologies -> mmead@bnt.com
>Release: FreeBSD 2.0-BUILT-19950603 i386
>Environment:
Standard environment when booting up. Here is /etc/sysconfig for more
information on that environment:
----- /etc/sysconfig -----
#!/bin/sh
#
# This is sysconfig - a file full of useful variables that you can set
# to change the default startup behavior of your system.
#
# sysconfig,v 1.14 1995/05/17 04:46:57 rgrimes Exp
######################### Start Of Syscons Section #######################
# Choose keyboard map from /usr/share/syscons/keymaps/* or NO if default.
keymap=NO
# Set keyboard rate to: slow, normal, fast or NO if default.
keyrate="fast"
# Change function keys default values (or no change if NO)
# Syntax: "<funkey_number> <new_value> [<funkey_number> <new_value>]..."
keychange=NO
# Desired cursor type {normal|blink|destructive}, NO if no change
cursor=NO
# Choose screen map from /usr/share/syscons/scrnmaps/* (or NO for none)
scrnmap=NO
# Choose font 8x16 from /usr/share/syscons/fonts/* (or NO for default)
font8x16=NO
# Choose font 8x14 from /usr/share/syscons/fonts/* (or NO for default)
font8x14=NO
# Choose font 8x8 from /usr/share/syscons/fonts/* (or NO for default)
font8x8=NO
# Set blank time (in seconds) or "off" to turn it off (or NO for default)
blanktime="300"
# Set to screen saver desired: blank, green, snake, star (or NO for none)
saver="blank"
# General russian setup for example:
# (koi8-r keyboard with cp866 screen font mapped to koi8-r)
#
# keymap=ru.koi8-r
# keyrate=fast
# keychange="61 [K"
# cursor=destructive
# scrnmap=koi8-r2cp866
# font8x16=cp866b-8x16
# font8x14=cp866-8x14
# font8x8=cp866-8x8
# blanktime=600
# saver=snake
######################### End Of Syscons Section #######################
######################### Start Of Netconfig Section #######################
# Set to the name of your host - this is pretty important!
hostname="Glock.COM"
# Set to the NIS domainname of your host, or NO if none
defaultdomainname=NO
#
# Some broken implementations can't handle the RFC 1323 and RFC 1644
# TCP options. If TCP connections randomly hang, try disabling this,
# and bug the vendor of the losing equipment.
#
tcp_extensions=YES
#
# Set to the list of network devices on this host. You must have an
# ifconfig_${network_interface} line for each interface listed here.
# for example:
#
# network_interfaces="ed0 sl0 lo0"
# ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00"
# ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00"
#
network_interfaces="ed0 lo0"
ifconfig_ed0="inet 198.82.228.165 netmask 255.255.255.0"
ifconfig_lo0="inet localhost"
#
# Set to the list of route add lines for this host. You must have a
# route_${static_routes} line for each static route listed here.
#
static_routes="multicast loopback"
route_multicast="224.0.0.0 -netmask 0xf0000000 -interface ${hostname}"
route_loopback="${hostname} localhost"
# Set to the host you'd like set as your default router, or NO for none.
defaultrouter="198.82.228.1"
# These are the flags you'd like to start the routing daemon with
routedflags="-q"
# timed flags, or NO if you don't want to start the time daemon
timedflags=NO
# xntpd flags, or NO if you don't want to start the xntpd daemon
xntpdflags="NO"
# this is inoperative unless xntpd is enabled; NO to disable
tickadjflags="-Aq"
# Set to the site you'd like to syncronize your clock from (gatekeeper.dec.com,
# for example) or NO for no such site.
ntpdate="ntp-1.vt.edu"
# Set to YES if you want to run rwhod
rwhod="YES"
# Default sendmail flags. -bd is pretty mandatory, -q<n>m sets the queue scan
# time in minutes. If set to NO, don't start sendmail at all.
sendmail_flags="-bd -q15m"
# Set to appropriate flags if you want to use AMD
amdflags="NO"
# Set to YES if this machine will be an NFS client
nfs_client=NO
# Set to YES if this machine will be an NFS server
nfs_server=NO
# Set to appropriate flags if you want to start NIS for a client
nis_clientflags="NO"
# Set to appropriate flags if you want to start NIS for a server
nis_serverflags="NO"
# Set to appropriate flags for yppasswdd, if you wish to run it.
# Typical flags might be "-m /var/yp/master.passwd -s -f"
yppasswddflags="NO"
# Set to appropriate flags for named, if you have a full-time
# connection to the Internet.
# For most hosts, flags should be "-b /etc/namedb/named.boot"
namedflags="-b /etc/namedb/named.boot"
# Set to YES if you want to run the X-10 power controller daemon
xtend=NO
# Set to YES if you want kernel crashdumps to be saved for debugging
savecore=NO
# Set to YES if you want to run Kerberos authentication
kerberos_server=NO
# Set to YES if you want to run gated
gated=NO
# Set to YES if you wish to check quotas. NOTE: For now this probably
# doesn't work and should be left disabled.
check_quotas=NO
# Set to YES to turn on accounting. NOTE: For now this probably
# doesn't work and should be left disabled.
accounting=YES
# This stuff needed for proper daemons tuning, comsat f.e.
# See profile and csh.login also.
# Uncomment next line if you want to setup your 8-bit locale at program
# startup automatically
# ENABLE_STARTUP_LOCALE=; export ENABLE_STARTUP_LOCALE
# Uncomment next line to activate russian locale
# LANG=ru_SU.KOI8-R; export LANG
# Uncomment next line to activate italian locale
# LANG=it_IT.ISO8859-1; export LANG
# For full list of locales, check /usr/share/locale/*
######################### End Of Netconfig Section #######################
######################### Start Of Misc Section #######################
# Set to YES if you want ibcs2 (SCO) emulation loaded at startup
ibcs2=NO
----- /etc/sysconfig -----
>Description:
options QUOTA has been compiled into the kernel. The
/etc/fstab file follows:
----- /etc/fstab -----
/dev/sd0a / ufs rw 1 1
/dev/sd1s1f /tmp ufs rw,userquota=/var/quotas/tmp.user,groupquota=/var/quotas/tmp.group 1 1
/dev/sd0s2e /usr ufs rw,userquota=/var/quotas/usr.user,groupquota=/var/quotas/usr.group 1 1
/dev/sd1s1g /usr/local ufs rw 1 1
/dev/sd1s1e /var ufs rw,userquota=/var/quotas/var.user,groupquota=/var/quotas/var.group 1 1
/dev/sd1s1b none swap sw 0 0
/dev/sd0s2b none swap sw 0 0
proc /proc procfs rw 0 0
/dev/cd0a /cdrom cd9660 ro 0 0
----- /etc/fstab -----
All of the files specified in /var/quotas exist.
>How-To-Repeat:
Just reboot with my sysconfig and the quota setup shown above.
>Fix:
Unknown.
>Audit-Trail:
>Unformatted:
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506151900.MAA05963>