Date: Fri, 13 Nov 2015 07:02:36 -0800 From: Thomas Skibo <thomasskibo@yahoo.com> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Zybo support Message-ID: <CD91083B-7CEC-427B-8F14-8A8DA9779B47@yahoo.com> In-Reply-To: <CAJ-VmokWtHsN38dZb0qjxbpxqr-%2B-jGxTSUEGjwMx_9s2Bvhew@mail.gmail.com> References: <D4F2DCA7-E02B-4C3D-B267-1AAE3ECFA7A6@yahoo.com> <CAJ-VmokWtHsN38dZb0qjxbpxqr-%2B-jGxTSUEGjwMx_9s2Bvhew@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
> On Nov 12, 2015, at 9:43 PM, Adrian Chadd <adrian.chadd@gmail.com> wrote:
>
> hi cool! Can you put those two changes up somehere?
>
> That way we can drag them into -HEAD.
>
> Thanks!
>
>
> -a
>
I’ve attached the fdt file zybo.dts for /usr/src/sys/boot/fdt/dts/arm and the patch file for /usr/src/sys/arm/conf/ZEDBOARD.
Thanks!
—
Thomas Skibo
thomasskibo@yahoo.com
[-- Attachment #2 --]
/*-
* Copyright (c) 2015 The FreeBSD Foundation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/dts-v1/;
/ {
model = "zybo";
compatible = "digilent,zybo";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&GIC>;
// cpus {
// #address-cells = <1>;
// #size-cells = <0>;
// cpu@0 {
// device-type = "cpu";
// model = "ARM Cortex-A9";
// };
// };
memory {
// First megabyte isn't accessible by all interconnect masters.
device_type = "memory";
reg = <0x100000 0x1ff00000>; /* 511MB RAM at 0x100000 */
};
// Zynq PS System registers.
//
ps7sys@f8000000 {
device_type = "soc";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8000000 0xf10000>;
// SLCR block
slcr: slcr@7000 {
compatible = "xlnx,zy7_slcr";
reg = <0x0 0x1000>;
clock-frequency = <50000000>; // 50Mhz PS_CLK
};
// Interrupt controller
GIC: gic {
compatible = "arm,gic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0xf01000 0x1000>, // distributer registers
<0xf00100 0x0100>; // CPU if registers
};
// L2 cache controller
pl310@f02000 {
compatible = "arm,pl310";
reg = <0xf02000 0x1000>;
interrupts = <34>;
interrupt-parent = <&GIC>;
};
// Device Config
devcfg: devcfg@7000 {
compatible = "xlnx,zy7_devcfg";
reg = <0x7000 0x1000>;
interrupts = <40>;
interrupt-parent = <&GIC>;
};
// triple timer counters0,1
ttc0: ttc@1000 {
compatible = "xlnx,ttc";
reg = <0x1000 0x1000>;
};
ttc1: ttc@2000 {
compatible = "xlnx,ttc";
reg = <0x2000 0x1000>;
};
// ARM Cortex A9 TWD Timer
timer@f00600 {
compatible = "arm,mpcore-timers";
clock-frequency = <325000000>; // 325Mhz
#address-cells = <1>;
#size-cells = <0>;
reg = <0xf00200 0x100>, // Global Timer Regs
<0xf00600 0x20>; // Private Timer Regs
interrupts = < 27 29 >;
interrupt-parent = <&GIC>;
};
// system watch-dog timer
swdt@5000 {
device_type = "watchdog";
compatible = "xlnx,zy7_wdt";
reg = <0x5000 0x1000>;
interrupts = <41>;
interrupt-parent = <&GIC>;
};
scuwdt@f00620 {
device_type = "watchdog";
compatible = "arm,mpcore_wdt";
reg = <0xf00620 0x20>;
interrupts = <30>;
interrupt-parent = <&GIC>;
reset = <1>;
};
}; // pssys@f8000000
// Zynq PS I/O Peripheral registers.
//
ps7io@e0000000 {
device_type = "soc";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0000000 0x300000>;
// uart0: uart@0000 {
// device_type = "serial";
// compatible = "cadence,uart";
// reg = <0x0000 0x1000>;
// interrupts = <59>;
// interrupt-parent = <&GIC>;
// clock-frequency = <50000000>;
// };
uart1: uart@1000 {
device_type = "serial";
compatible = "cadence,uart";
reg = <0x1000 0x1000>;
interrupts = <82>;
interrupt-parent = <&GIC>;
clock-frequency = <50000000>;
current-speed = <115200>;
};
gpio: gpio@a000 {
compatible = "xlnx,zy7_gpio";
reg = <0xa000 0x1000>;
interrupts = <52>;
interrupt-parent = <&GIC>;
};
// GigE
eth0: eth@b000 {
// device_type = "network";
compatible = "cadence,gem";
reg = <0xb000 0x1000>;
interrupts = <54 55>;
interrupt-parent = <&GIC>;
ref-clock-num = <0>;
};
// SDIO
sdhci0: sdhci@100000 {
compatible = "xlnx,zy7_sdhci";
reg = <0x100000 0x1000>;
interrupts = <56>;
interrupt-parent = <&GIC>;
max-frequency = <50000000>;
};
// QSPI
qspi0: qspi@d000 {
compatible = "xlnx,zy7_qspi";
reg = <0xd000 0x1000>;
interrupts = <51>;
interrupt-parent = <&GIC>;
spi-clock = <50000000>;
ref-clock = <200000000>;
};
// USB
ehci0: ehci@2000 {
compatible = "xlnx,zy7_ehci";
reg = <0x2000 0x1000>;
interrupts = <53>;
interrupt-parent = <&GIC>;
};
}; // ps7io@e0000000
chosen {
stdin = &uart1;
stdout = &uart1;
};
};
[-- Attachment #3 --]
Index: sys/arm/conf/ZEDBOARD
===================================================================
--- sys/arm/conf/ZEDBOARD (revision 290688)
+++ sys/arm/conf/ZEDBOARD (working copy)
@@ -1,6 +1,6 @@
#
# ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based
-# ZedBoard (www.zedboard.org)
+# ZedBoard (www.zedboard.org) and similar Zynq boards.
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
@@ -59,6 +59,7 @@
device cgem # Zynq-7000 gig ethernet device
device mii
device e1000phy
+device rgephy # Zybo uses Realtek RTL8211E
device pty
device uart
device gpio
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CD91083B-7CEC-427B-8F14-8A8DA9779B47>