Date: Fri, 7 Jul 2000 02:24:35 -0700 (PDT) From: Mark Diekhans <markd@Kermodei.com> To: freebsd-mobile@freebsd.org Subject: Problems with FBSD 4.0 on a Sharp Actius 290 Message-ID: <14693.41427.917136.675543@osprey.Kermodei.Com>
next in thread | raw e-mail | index | archive | help
Hi folks, I am try trying to get FreeBSD 4.0 running on a Sharp Actius 290. The remaining problems are suspend and PCCARDs. When resuming from suspend, the machine locks up after the `ata0: resetting devices; message is written to the console The PCCARD is acting like there is an interrupt conflict, but none can be found (tried em all, plus disabling unused devices as possible in the bios). A modem card echos AT command characters with about a second delay. It does respond with OK, etc; but its so slow it can't be use (can't even get it to dial) Double-checked this with A LAN card; it connects ok, but is very slow (~400ms vs 0.36ms ping using the built-in LAN). Both cards work under FreeBSD 4.0 running on a ThinkPad. Enclosed is the dmesg output. Any help is greatly appreciate. TIA, Mark CPU: Pentium II/Pentium II Xeon/Celeron (366.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 127602688 (124612K bytes) Preloaded elf kernel "kernel" at 0xc0272000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc027209c. Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <Trident model 9525 VGA-compatible display device> at 2.0 irq 0 rl0: <RealTek 8139 10/100BaseTX> port 0xf800-0xf8ff mem 0xfeddfc00-0xfeddfcff irq 10 at device 3.0 on pci0 rl0: Ethernet address: 08:00:1f:06:d3:8e miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0 pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 11.0 irq 10 pci0: <unknown card> (vendor=0x134d, dev=0x7890) at 12.0 irq 10 sc0: <System console> on isa0 sc0: VGA <4 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 ad0: 8623MB <FUJITSU MHK2090AT> [17520/16/63] at ata0-master using UDMA33 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 sio3 at port 0x2e8-0x2ef irq 15 slot 0 on pccard0 sio3: type 16550A sio3: unloaded pccard: card removed, slot 0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14693.41427.917136.675543>