Date: Wed, 24 Jan 2001 11:08:55 +0700 From: Hendro.Wicaksono@britishcouncil.or.id To: freebsd-questions@freebsd.org Subject: error compiling kernel Message-ID: <5D3A418FCC41D4119A8000B0D020A9667237DF@IDS1NT03>
next in thread | raw e-mail | index | archive | help
I have installed FreeBSD 4.1.1 and trying to compile kernel. For the first, it's done. For the second, when I was trying to add sound card, then the compiling process was error altough I tried to recompile with the last success configuration. I decided to reinstall my box, and tried to recompile again and still failed. Here is my last failed configuration (after reinstallation): ------------------- # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.8 2000/07/20 02:51:02 msmith Exp $ machine i386 # cpu I386_CPU # cpu I486_CPU cpu I586_CPU # cpu I686_CPU ident HENDRO maxusers 10 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device # options NFS #Network Filesystem # options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives # device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers # device ahb # EISA AHA1742 family # device ahc # AHA2940 and onboard AIC7xxx devices # device amd # AMD 53C974 (Teckram DC-390(T)) # device dpt # DPT Smartcache - See LINT for options! # device isp # Qlogic family # device ncr # NCR/Symbios Logic # device sym # NCR/Symbios Logic (newer chipsets) # options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured # device adv0 at isa? # device adw # device bt0 at isa? # device aha0 at isa? # device aic0 at isa? # SCSI peripherals # device scbus # SCSI bus (required) # device da # Direct Access (disks) # device sa # Sequential Access (tape etc) # device cd # CD # device pass # Passthrough device (direct SCSI access) # RAID controllers # device ida # Compaq Smart RAID # device amr # AMI MegaRAID # device mlx # Mylex DAC960 family # device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 # device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support # device card # device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 # device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # device sio2 at isa? disable port IO_COM3 irq 5 # device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. # device de # DEC/Intel DC21x4x (``Tulip'') # device fxp # Intel EtherExpress PRO/100B (82557, 82558) # device tx # SMC 9432TX (83c170 ``EPIC'') # device vx # 3Com 3c590, 3c595 (``Vortex'') # device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # device miibus # MII bus support # device dc # DEC/Intel 21143 and various workalikes # device rl # RealTek 8129/8139 # device sf # Adaptec AIC-6915 (``Starfire'') # device sis # Silicon Integrated Systems SiS 900/SiS 7016 # device ste # Sundance ST201 (D-Link DFE-550TX) # device tl # Texas Instruments ThunderLAN # device vr # VIA Rhine, Rhine II # device wb # Winbond W89C840F # device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x240 irq 10 iomem 0xd8000 # device ex # device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. # device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. # device an # Xircom Ethernet # device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. # device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 # device fe0 at isa? port 0x300 # device le0 at isa? port 0x300 irq 5 iomem 0xd0000 # device lnc0 at isa? port 0x280 irq 10 drq 0 # device cs0 at isa? port 0x300 # device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # pseudo-device bpf #Berkeley packet filter # USB support # device uhci # UHCI PCI->USB interface # device ohci # OHCI PCI->USB interface # device usb # USB Bus (required) # device ugen # Generic # device uhid # "Human Interface Devices" # device ukbd # Keyboard # device ulpt # Printer # device umass # Disks/Mass storage - Requires scbus and da # device ums # Mouse # USB Ethernet, requires mii # device aue # ADMtek USB ethernet # device cue # CATC USB ethernet # device kue # Kawasaki LSI USB ethernet # Sound Card Sound Blaster # controller pcm device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 ------------------- Can you help what is still wrong in my configuration? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5D3A418FCC41D4119A8000B0D020A9667237DF>