Date: Mon, 18 May 1998 08:06:38 -0700 (PDT) From: Donald Burr <dburr@POBoxes.com> To: The Hermit Hacker <scrappy@hub.org>, FreeBSD SCSI <freebsd-scsi@FreeBSD.ORG> Cc: freebsd-current@FreeBSD.ORG Subject: RE: Bad shutdown... Message-ID: <XFMail.980518080638.dburr@POBoxes.com> In-Reply-To: <Pine.BSF.3.96.980516183227.580B-100000@thelab.hub.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This message is in MIME format --_=XFMail.1.2.p0.FreeBSD:980518080638:206=_ Content-Type: text/plain; charset=us-ascii -----BEGIN PGP SIGNED MESSAGE----- My secret spy satellite informs me that on 16-May-98, The Hermit Hacker wrote: > This is based on a 0515 kernel, with the CAM snapshot applied to it... > > hub# halt > > syncing disks... 3 3 done > panic: lockmgr: pid 318, not exclusive lock holder 1 unlocking > > dumping to dev 20401, offset 262144 > dump Aborting dump due to I/O error. status == 0x200, scsi status == 0x0 > i/o error > Automatic reboot in 15 seconds - press a key on the console to abort Just FYI, I'm seeing the exact same thing, except I don't use CAM. This is on a P133 with a kernel cvsupped and compiled around may 12. Attached are outputs of 'dmesg' and my kernel config file. Has this been fixed? Is it even known? - --- Donald Burr <dburr@POBoxes.com> - Ask me for my PGP key | PGP: Your WWW HomePage: http://DonaldBurr.base.org/ ICQ #1347455 | right to Address: P.O. Box 91212, Santa Barbara, CA 93190-1212 | 'Net privacy. Phone: (805) 957-9666 FAX: (800) 492-5954 | USE IT. -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCVAwUBNWBOfvjpixuAwagxAQFshgP9G1eC8EYEGA92rvL4hJ/7g+gGdcnrx0Hk A/Ybc69m2l/79nauinyuOIL/QQAxRBgmEr/o8Dej2soOJMg2bBo04VuaXzy65PSz ZJOXH2XxEDRG/h3t37O+6UXh4V1NEIujx+KHL6DRHqnAtQw7Dm7hS4d3Onlsri+A hgKR2P6rO8k= =m4Er -----END PGP SIGNATURE----- --_=XFMail.1.2.p0.FreeBSD:980518080638:206=_ Content-Disposition: attachment; filename="CONTROL" Content-Transfer-Encoding: 7bit Content-Description: CONTROL Content-Type: text/plain; charset=us-ascii; name=CONTROL; SizeOnDisk=8244 # # $Id: CONTROL,v 3.5 1998/05/11 11:38:22 dburr Exp $ # # $Log: CONTROL,v $ # Revision 3.5 1998/05/11 11:38:22 dburr # Added firewall stuff. # Made it work. # # Revision 3.4 1998/05/11 08:13:03 dburr # Added IP firewalling. # # Revision 3.3 1998/05/11 08:10:32 dburr # Removed a few oudated stuff. # Took out the new POSIX realtime stuff. # Cleaned up other minor things. # # Revision 3.2 1998/05/11 05:31:11 dburr # Eliminated entry for 'log' pseudo-device. # (apparently no longer required in CURRENT) # # Revision 3.1 1998/05/11 05:29:58 dburr # Updated for 3.0-CURRENT. # # Revision 2.5 1998/04/21 08:33:38 dburr # Added OVERRIDE_TUNER to fix that weird Temic PAL thing. # # Revision 2.4 1998/04/10 11:16:03 dburr # Moved ed0 to irq 10. # # Revision 2.3 1998/04/10 10:42:51 dburr # Fixed defs of ed0, sb0, sbxvi0, and xsbmidi0 because I switched # back to the non-PnP ethernet card. # # Revision 2.2 1998/04/10 08:12:45 dburr # Commented out Coda stuff, until I actually download the thing! # # Revision 2.1 1998/04/10 08:08:48 dburr # Migrated configuration file to fit with FreeBSD 2.2.6-RELEASE. # # Revision 1.19 1998/04/10 07:53:32 dburr # Changed ed0, sb0, sbxvi0, sbmidi0 to reflect crazy configuration # that PnP BIOS assigned when changing Ethernet cards. # # Revision 1.18 1998/04/06 00:57:56 dburr # Changed defines to use ISA ethernet card instead of PCI. # # Revision 1.17 1998/04/05 23:29:52 dburr # Added driver for BrookTree 848 PCI TV capture card. # # Revision 1.16 1998/03/21 10:35:03 dburr # SCBPAGING wasn't the cause of the troubles, so I put it back in. # # Revision 1.15 1998/03/20 18:30:52 dburr # Removed AHC_SCBPAGING_ENABLE to try and fix problems with tosha. # # Revision 1.14 1998/03/14 12:39:59 dburr # Upped maxusers to try and help the file table problem. # # Revision 1.13 1998/03/13 09:06:23 dburr # Upped CHILD_MAX and OPEN_MAX to 512. # # Revision 1.12 1998/03/02 11:14:47 dburr # Upped max child procs and files to 256 per user. # # Revision 1.11 1998/02/23 11:03:59 dburr # Re-enabled SCB paging. # # Revision 1.10 1998/02/16 17:30:35 dburr # Fixed typo in joy0 declaration. # # Revision 1.9 1998/02/16 17:30:00 dburr # Removed PnP support. # # Revision 1.8 1998/02/04 10:07:44 dburr # Removed flags for the nonexistent 2nd IDE disk. # Switched to FreeBSD native sound driver. # Removed NCR/SymBIOS driver since I have # decided to keep the Adaptec card. # # Revision 1.7 1998/01/24 07:43:29 dburr # Trying out original sound driver. # # Revision 1.6 1998/01/24 03:37:58 dburr # Added driver for joystick port. # # Revision 1.5 1998/01/24 03:36:33 dburr # Fixed declaration of sound driver. # # Revision 1.4 1998/01/13 14:21:59 root # fixed for new sound driver. # # Revision 1.3 1998/01/13 07:50:44 root # Added lines for PnP support. # Deleted old sound driver lines. # Added support for PnP sound card. # # Revision 1.2 1998/01/13 07:43:01 root # removed all unused entries. # trimmed down all comments. # # Revision 1.1 1998/01/13 07:25:03 root # Initial revision # # # kernel config file for control.colossus.dyn.ml.org # machine "i386" # we are on an Intel x86 architecture ident CONTROL # identification of this kernel maxusers 100 # sizes certain tables for 10 users options "MAXDSIZ=(256*1024*1024)" # max. proc size = 256MB options "DFLDSIZ=(256*1024*1024)" # dflt. proc. size = 256MB options INCLUDE_CONFIG_FILE # Include this file in kernel config kernel root on wd0 dumps on wd0 # where root fs and crashdumps are cpu "I586_CPU" # our cpu is a Pentium options "CPU_SUSP_HLT" # suspend the CPU on system halt options "COMPAT_43" # syscalls compatible with 4.3BSD options USER_LDT # allow user-level control of i386 ldt options SYSVSHM # SysV IPC (shared memory) options SYSVSEM # SysV IPC (semaphores) options SYSVMSG # SysV IPC (message queues) options "MD5" # MD5 checking in kernel options "VM86" # VM86 mode (for doscmd) options KTRACE # kernel tracing via ktrace(2) options PERFMON # Pentium performance monitors options UCONSOLE # let users grab the console options INET # Internet communications protocols pseudo-device ether # Generic Ethernet pseudo-device loop # Network loopback device pseudo-device sl 2 # Serial Line IP pseudo-device ppp 2 # Point-to-point protocol pseudo-device bpfilter 6 # Berkeley packet filter pseudo-device tun 2 # Tunnel driver(user process ppp) options PPP_BSDCOMP # PPP BSD compression support options PPP_DEFLATE # PPP zlib/deflate/gzip support options PPP_FILTER # enable bpf filtering options "TCP_COMPAT_42" # emulate 4.2BSD TCP bugs options IPFIREWALL # IP firewalling options IPFIREWALL_DEFAULT_TO_ACCEPT # defaults to accepting all conn's options IPDIVERT # enable ipfw divert sockets options FFS # Fast filesystem options NFS # Network File System options "CD9660" # ISO 9660 filesystem options MSDOSFS # MS DOS File System options PROCFS # Process filesystem options NSWAPDEV=5 # max. number of swap devices options QUOTA # enable disk quotas controller scbus0 # base SCSI code device ch0 # SCSI media changers device sd0 # SCSI disks device st0 # SCSI tapes device cd0 # SCSI CD-ROMs device od0 # SCSI optical disk device worm0 at scbus? # SCSI worm device pt0 at scbus? # SCSI processor type device sctarg0 at scbus? # SCSI target options SCSIDEBUG # enable SCSI debug macros options SCSI_REPORT_GEOMETRY # always report geometry options OD_BOGUS_NOT_READY # fix od sense key weirdness options OD_AUTO_TURNOFF # auto-spindown od's pseudo-device pty 16 # Pseudo ttys - can go as high as 256 pseudo-device speaker # Play music out your speaker pseudo-device gzip # Exec gzipped a.out's pseudo-device vn 4 # Vnode driver (turns file into device) pseudo-device snp 4 # Snoop - to look at pty/vty/etc.. pseudo-device ccd 4 # Concatenated disk driver pseudo-device su # scsi user pseudo-device ssc # super scsi controller isa0 # ISA bus options "AUTO_EOI_1" # Enable AUTO_EOI for master 8259 options "AUTO_EOI_2" # Enable AUTO_EOI for slave 8259 options BOUNCE_BUFFERS # needed if >16MB RAM for busmaster device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # syscons console driver options MAXCONS=12 # number of virtual consoles device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr # math coprocessor support controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xa0ff vector wdintr # primary IDE controller disk wd0 at wdc0 drive 0 # primary master drive controller wdc1 at isa? port "IO_WD2" bio irq 15 flags 0xa0ff vector wdintr # secondary IDE controller disk wd2 at wdc1 drive 0 # secondary master drive controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr # floppy drive controller disk fd0 at fdc0 drive 0 # floppy drive 1 device lpt0 at isa? port? tty irq 7 vector lptintr # printer port device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # PS/2 mouse port device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr # serial port 1 device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr # serial port 2 device ed0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector edintr # Ethernet card controller snd0 # sound card controller device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr # SoundBlaster 16 device sbxvi0 at isa? drq 5 # SoundBlaster 16 device sbmidi0 at isa? port 0x330 # SoundBlaster 16 device opl0 at isa? port 0x388 # OPL-3 FM synthesizer device joy0 at isa? port "IO_GAME" # Joystick port device pca0 at isa? port IO_TIMER1 tty # PC audio driver (sound out speaker) controller pci0 # PCI bus device bktr0 # BrookTree 848 PCI TV capture card options OVERRIDE_TUNER=1 # force it to be Temic NTSC tuner controller ahc0 # Adaptec PCI SCSI card options AHC_TAGENABLE # Enable tagged command queueing options AHC_SCBPAGING_ENABLE # Enable SCB paging options AHC_ALLOW_MEMIO # Allow memory-mapped I/O options SCSI_DELAY=5 # let SCSI devices spinup before probe options "SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)" # increase max. shared memory size --_=XFMail.1.2.p0.FreeBSD:980518080638:206=_ Content-Disposition: attachment; filename="dmesg" Content-Transfer-Encoding: 7bit Content-Description: dmesg Content-Type: text/plain; charset=us-ascii; name=dmesg; SizeOnDisk=3234 Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #1: Tue May 12 15:16:43 PDT 1998 dburr@control.colossus.dyn.ml.org:/usr/src-current/sys/compile/CONTROL Timecounter "i8254" frequency 1193182 Hz cost 4046 ns Timecounter "TSC" frequency 133637136 Hz cost 245 ns CPU: Pentium (133.64-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) avail memory = 62197760 (60740K bytes) Probing for devices on PCI bus 0: chip0: <VIA 82C585 (Apollo VP1/VPX) system controller> rev 0x23 on pci0.0.0 chip1: <VIA 82C586 PCI-ISA bridge> rev 0x25 on pci0.7.0 ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1 vga0: <ATI model 4755 graphics accelerator> rev 0x9a on pci0.8.0 ahc0: <Adaptec 2940A Ultra SCSI host adapter> rev 0x01 int a irq 11 on pci0.9.0 ahc0: aic7860 Single Channel, SCSI Id=7, 3/8 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 ahc0: target 0 Tagged Queuing Device scbus0 target 0 lun 0: <IBM 0662S12 !O 2 23> type 0 fixed SCSI 2 sd0 at scbus0 target 0 lun 0 sd0: Direct-Access 1003MB (2055035 512 byte sectors) sd0: with 4119 cyls, 5 heads, and an average 99 sectors/track scbus0 target 1 lun 0: <NEC CD-ROM DRIVE:462 1.16> type 5 removable SCSI 2 cd0 at scbus0 target 1 lun 0 cd0: CD-ROM can't get the size scbus0 target 2 lun 0: <SONY CD-R CDU926S 1.1g> type 5 removable SCSI 2 cd1 at scbus0 target 2 lun 0 cd1: CD-ROM can't get the size bktr0: <BrookTree 848> rev 0x12 int a irq 9 on pci0.10.0 Miro TV, Temic NTSC tuner. Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <12 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 on isa ed0: address 00:c0:f0:1d:2c:2d, type NE2000 (16 bit) lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A pca0 on motherboard pca0: PC speaker audio driver wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ff on isa wdc0: unit 0 (wd0): <Maxtor 84320D4>, DMA, 32-bit, multi-block-16 wd0: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 flags 0xa0ff on isa wdc1: unit 0 (wd2): <WDC AC22100H>, DMA, 32-bit, multi-block-16 wd2: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa snd0: <SoundBlaster 16 4.13> sbxvi0 at ? drq 5 on isa snd0: <SoundBlaster 16 4.13> sbmidi0 at 0x330 on isa snd0: <SoundBlaster MPU-401> opl0 at 0x388 on isa snd0: <Yamaha OPL3 FM> joy0 at 0x201 on isa joy0: joystick sctarg0 at scbus255 target 255 lun 255 sctarg0: Processor Target Intel Pentium F00F detected, installing workaround ccd0-3: Concatenated disk drivers IP packet filtering initialized, divert enabled, default to accept, logging disa bled --_=XFMail.1.2.p0.FreeBSD:980518080638:206=_-- End of MIME message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.980518080638.dburr>