Date: Tue, 23 Dec 1997 16:28:05 +0100 (CET) From: Andrzej Bialecki <abial@korin.warman.org.pl> To: freebsd-current@freebsd.org Subject: Adaptec AIC-7895 ??? Intel Dakota MB... Message-ID: <Pine.NEB.3.95.971223162109.15025B-400000@korin.warman.org.pl>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi!
As I wrote in previous message, the kernel doesn't find SCSI controller at
all... it seems to me that PCI probe doesn't find it first, and
consequently the aha driver has nothing to do (so probably it's not its
fault).
Perhaps it has something to do with (too smart for me) the ATX/PnP
smartness of this MB. E.g. I had to explicitly turn on and assign
resources to Serial0 because it thought that since nobody probed it it's
not needed...
I attached dmesg output, mptable and pnpinfo. Please help... :-(
Andrzej Bialecki
---------------------+---------------------------------------------------------
abial@warman.org.pl | if(halt_per_mth > 0) { fetch("http://www.freebsd.org") }
Research & Academic | "Be open-minded, but don't let your brains to fall out."
Network in Poland | All of the above (and more) is just my personal opinion.
---------------------+---------------------------------------------------------
[-- Attachment #2 --]
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f70c0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x3e
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009f960
signature: 'PCMP'
base table length: 292
version: 1.4
checksum: 0xe6
OEM ID: 'INTEL '
Product ID: 'DK440LX '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 28
local APIC address: 0xfee00000
extended table length: 144
extended table checksum: 218
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
1 0x11 BSP, usable 6 3 3 0x80fbff
0 0x11 AP, usable 6 3 3 0x80fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 2 0
INT active-hi edge 2 1 2 1
INT active-hi edge 2 0 2 2
INT active-hi edge 2 3 2 3
INT active-hi edge 2 4 2 4
INT active-hi edge 2 5 2 5
INT active-hi edge 2 6 2 6
INT active-hi edge 2 7 2 7
INT active-hi edge 2 8 2 8
INT active-lo level 2 9 2 9
INT active-hi edge 2 10 2 10
INT active-lo level 2 11 2 11
INT active-hi edge 2 12 2 12
INT active-hi edge 2 13 2 13
INT active-hi edge 2 14 2 14
INT active-hi edge 2 15 2 15
INT active-lo level 0 2:D 2 19
INT active-lo level 0 9:A 2 17
INT active-lo level 0 9:B 2 17
INT active-lo level 0 13:A 2 17
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
bus ID: 0 address type: memory address
address base: 0x20000000
address range: 0xd4000000
--
bus ID: 0 address type: prefetch address
address base: 0xf4000000
address range: 0x4000000
--
bus ID: 0 address type: memory address
address base: 0xf8000000
address range: 0x8000000
--
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
bus ID: 0 address type: memory address
address base: 0xd0000
address range: 0x10000
--
bus ID: 2 bus info: 0x01 parent bus ID: 0--
bus ID: 0 address modifier: add
predefined range: 0x00000000--
bus ID: 0 address modifier: add
predefined range: 0x00000001
-------------------------------------------------------------------------------
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optional (built-in defaults will work in most cases):
#options NCPU=2 # number of CPUs
#options NBUS=3 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
===============================================================================
[-- Attachment #3 --]
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CSC0b35 (0x350b630e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 1
Device Description: CS4236B
Logical Device ID: CSC0000 0x0000630e #0
Device Description: WSS/SB
TAG Start DF
Good Configuration
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 - only one type (true/edge)
I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Acceptable Configuration
DMA: channel(s) 1 3
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 10 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x260, alignment 0x10, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 10 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x3f0, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x300, alignment 0x10, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: CSC0001 0x0100630e #1
Device Description: Game
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: CSC0010 0x1000630e #2
Device Description: Ctrl
I/O Range 0x120 .. 0xfe8, alignment 0x8, len 0x8
[16-bit addr]
Logical Device ID: CSC0003 0x0300630e #3
Device Description: MPU
TAG Start DF
Good Configuration
IRQ: 10 - only one type (true/edge)
I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 10 11 12 15 - only one type (true/edge)
I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
I/O Range 0x330 .. 0x3f8, alignment 0x8, len 0x2
[16-bit addr]
TAG End DF
End Tag
Successfully got 46 resources, 4 logical fdevs
-- card select # 0x0001
CSN CSC0b35 (0x350b630e), Serial Number 0xffffffff
Logical device #0
IO: 0x0534 0x0388 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 1 0
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0120 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0330 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 10 0
DMA 4 4
IO range check 0x00 activate 0x01
[-- Attachment #4 --]
Booting 0:fd(0,a)kernel @ 0x286000
text=0x12d000 data=0x1000 bss=0x0 symbols=[+0x0+0x4+0x270+0x4+0x1e7]
Can't find file kernel.config
total=0x3b445f entry point=0x286000
Uncompressing kernel...warning: malloc wrapped
done
Booting the kernel
BIOS basemem (638K) != RTC basemem (640K), setting to BIOS value
BIOS extmem (65532K) != RTC extmem (65535K)
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Tue Dec 23 12:43:22 CET 1997
root@hwin.nask.waw.pl:/usr/src/sys/compile/BOOTMFS
Calibrating clock(s) ... i586 clock: 233134771 Hz, i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium Pro (233.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping=3
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 536870912 (524288K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003b4000 - 0x1fffdfff, 532979712 bytes (130122 pages)
avail memory = 519380992 (507208K bytes)
Found BIOS32 Service Directory header at 0xf00f7060
Entry = 0xfd781 (0xf00fd781) Rev = 0 Len = 1
PCI BIOS entry at 0x21c
DMI header at 0xf00f7050
Version 2.0
Table at 0xef970, 49 entries, 1581 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000f7090
pci_open(1):mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):mode1res=0x80000000 (0x80000000)
pci_cfgcheck:device 0 [class=060000] [hdr=00] is there (id=71808086)
Probing for devices on PCI bus 0:
found->vendor=0x8086, dev=0x7180, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
map[0]: type 3, range 32, base f4000000, size 26
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
found->vendor=0x8086, dev=0x7181, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
found->vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.2.0
found->vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.2.1
intel_piix_status: primary master/slave sample = 3, master/slave recovery = 3
intel_piix_status: primary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: primary master/slave sample = 3, master/slave recovery = 3
intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 0 status: 20 from port: 0000fcb2
ide_pci: ide0:0 has been configured for DMA by BIOS
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 04 from port: 0000fcba
found->vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=9
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 9 on pci0.2.2
found->vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
chip4: <Intel 82371AB power management> rev 0x01 on pci0.2.3
found->vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=9
map[0]: type 3, range 32, base fecfd000, size 12
map[1]: type 4, range 32, base 0000fcc0, size 5
map[2]: type 1, range 32, base fed00000, size 20
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 9 on pci0.3.0
fxp0: Ethernet address 00:a0:c9:61:2c:55
found->vendor=0x9004, dev=0x7895, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=1
intpin=a, irq=11
map[0]: type 4, range 32, base 0000f800, size 8
map[1]: type 1, range 32, base fecff000, size 12
found->vendor=0x9004, dev=0x7895, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=1
intpin=b, irq=11
map[0]: type 4, range 32, base 0000f400, size 8
map[1]: type 1, range 32, base fecfe000, size 12
found->vendor=0x5333, dev=0x8901, revid=0x16
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
map[0]: type 1, range 32, base f8000000, size 26
vga0: <S3 Trio 64 graphics accelerator> rev 0x16 int a irq 11 on pci0.13.0
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0045
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <4 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x30 on isa
sio0: type 16550A, console
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found
mse0: wrong signature ff
mse0 not found at 0x23c
psm0: current command byte:0045
kbdio: TEST_AUX_PORT status:0000
kbdio: RESET_AUX return code:00fe
kbdio: RESET_AUX return code:00fe
kbdio: RESET_AUX return code:00fe
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <TOSHIBA CD-ROM XM-6102B/1112>, removable, accel, ovlap, dma, iordy
wcd0: 4133/4134Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0: timeout getting status
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
imasks: bio c0084040, tty c007029a, net c007029a
BIOS Geometries:
0:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Considering MFS root f/s.
changing root device to fd0c
rootfs is 1440 Kbyte compiled in MFS
/stand/sysinstall running as init on serial console
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.95.971223162109.15025B-400000>