Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Jan 2020 05:02:39 -0800
From:      Cy Schubert <Cy.Schubert@cschubert.com>
To:        Hans Petter Selasky <hps@selasky.org>
Cc:        Cy Schubert <Cy.Schubert@cschubert.com>, freebsd-current@freebsd.org
Subject:   Re: Powerd Panic
Message-ID:  <202001241302.00OD2d44008368@slippy.cwsent.com>
In-Reply-To: <036a5750-1af7-b83d-e141-f43585a1b8d2@selasky.org>
References:  <202001240701.00O71L0F005850@slippy.cwsent.com>  <036a5750-1af7-b83d-e141-f43585a1b8d2@selasky.org>

next in thread | previous in thread | raw e-mail | index | archive | help
In message <036a5750-1af7-b83d-e141-f43585a1b8d2@selasky.org>, Hans Petter 
Sela
sky writes:
> On 2020-01-24 08:01, Cy Schubert wrote:
> > Let's try this again, this time with a subject line. It's late, almost bed
> > time and I'm forgetting subject lines. <sigh>
> > 
> > Hi,
> > 
> > Has anyone seen this before? It started happening on two of my machines
> > this evening. Both machines are AMD (not intel). In both cases powerd was
> > caught with its hand in the cookie jar.
> > 
> > Fatal trap 12: page fault while in kernel mode^M
> > cpuid = 3; apic id = 03^M
> > fault virtual address   = 0x90^M
> > fault code              = supervisor read data, page not present^M
> > instruction pointer     = 0x20:0xffffffff8068b018^M
> > stack pointer           = 0x28:0xfffffe0066ff99e0^M
> > frame pointer           = 0x28:0xfffffe0066ff99e0^M
> > code segment            = base 0x0, limit 0xfffff, type 0x1b^M
> >                          = DPL 0, pres 1, long 1, def32 0, gran 1^M
> > processor eflags        = interrupt enabled, resume, IOPL = 0^M
> > current process         = 2781 (powerd)^M
> > trap number             = 12^M
> > panic: page fault^M
> > cpuid = 3^M
> > time = 1579843504^M
> > KDB: stack backtrace:^M
> > db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame
> > 0xfffffe0066ff9650^M
> > vpanic() at vpanic+0x185/frame 0xfffffe0066ff96b0^M
> > panic() at panic+0x43/frame 0xfffffe0066ff9710^M
> > trap_fatal() at trap_fatal+0x386/frame 0xfffffe0066ff9770^M
> > trap_pfault() at trap_pfault+0x4f/frame 0xfffffe0066ff97e0^M
> > trap() at trap+0x288/frame 0xfffffe0066ff9910^M
> > calltrap() at calltrap+0x8/frame 0xfffffe0066ff9910^M
> > --- trap 0xc, rip = 0xffffffff8068b018, rsp = 0xfffffe0066ff99e0, rbp =
> > 0xfffffe
> > 0066ff99e0 ---^M
> > _rm_rlock() at _rm_rlock+0x58/frame 0xfffffe0066ff99e0^M
> > sysctl_root_handler_locked() at sysctl_root_handler_locked+0xde/frame
> > 0xfffffe00
> > 66ff9a20^M
> > sysctl_root() at sysctl_root+0x249/frame 0xfffffe0066ff9aa0^M
> > userland_sysctl() at userland_sysctl+0x178/frame 0xfffffe0066ff9b50^M
> > sys___sysctl() at sys___sysctl+0x5f/frame 0xfffffe0066ff9c00^M
> > amd64_syscall() at amd64_syscall+0x3a3/frame 0xfffffe0066ff9d30^M
> > fast_syscall_common() at fast_syscall_common+0x101/frame
> > 0xfffffe0066ff9d30^M
> > --- syscall (202, FreeBSD ELF64, sys___sysctl), rip = 0x2c034f9a, rsp =
> > 0x7fffff
> > ffeb38, rbp = 0x7fffffffeb70 ---^M
> > Uptime: 2h12m24s^M
> > Dumping 2496 out of 8167 MB: (CTRL-C to abort) ..1%..11%..21%..31%..41%..51
> %
> > ..61
> > %..71%..81%..91%^M
> > Dump complete^M
> > 
> > 
> > 
> > Fatal trap 12: page fault while in kernel mode^M
> > cpuid = 3; apic id = 03^M
> > fault virtual address   = 0x90^M
> > fault code              = supervisor read data, page not present^M
> > instruction pointer     = 0x20:0xffffffff8068b018^M
> > stack pointer           = 0x28:0xfffffe004d2a79e0^M
> > frame pointer           = 0x28:0xfffffe004d2a79e0^M
> > code segment            = base 0x0, limit 0xfffff, type 0x1b^M
> >                          = DPL 0, pres 1, long 1, def32 0, gran 1^M
> > processor eflags        = interrupt enabled, resume, IOPL = 0^M
> > current process         = 2849 (powerd)^M
> > trap number             = 12^M
> > panic: page fault^M
> > cpuid = 3^M
> > time = 1579847814^M
> > KDB: stack backtrace:^M
> > db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame
> > 0xfffffe004d2a7650^M
> > vpanic() at vpanic+0x185/frame 0xfffffe004d2a76b0^M
> > panic() at panic+0x43/frame 0xfffffe004d2a7710^M
> > trap_fatal() at trap_fatal+0x386/frame 0xfffffe004d2a7770^M
> > trap_pfault() at trap_pfault+0x4f/frame 0xfffffe004d2a77e0^M
> > trap() at trap+0x288/frame 0xfffffe004d2a7910^M
> > calltrap() at calltrap+0x8/frame 0xfffffe004d2a7910^M
> > --- trap 0xc, rip = 0xffffffff8068b018, rsp = 0xfffffe004d2a79e0, rbp =
> > 0xfffffe
> > 004d2a79e0 ---^M
> > _rm_rlock() at _rm_rlock+0x58/frame 0xfffffe004d2a79e0^M
> > sysctl_root_handler_locked() at sysctl_root_handler_locked+0xde/frame
> > 0xfffffe00
> > 4d2a7a20^M
> > sysctl_root() at sysctl_root+0x249/frame 0xfffffe004d2a7aa0^M
> > userland_sysctl() at userland_sysctl+0x178/frame 0xfffffe004d2a7b50^M
> > sys___sysctl() at sys___sysctl+0x5f/frame 0xfffffe004d2a7c00^M
> > amd64_syscall() at amd64_syscall+0x3a3/frame 0xfffffe004d2a7d30^M
> > fast_syscall_common() at fast_syscall_common+0x101/frame
> > 0xfffffe004d2a7d30^M
> > --- syscall (202, FreeBSD ELF64, sys___sysctl), rip = 0x800434f9a, rsp =
> > 0x7ffff
> > fffeb38, rbp = 0x7fffffffeb70 ---^M
> > Uptime: 2h57m35s^M
> > Dumping 1823 out of 5095 MB: (CTRL-C to abort) ..1%..11%..21%..31%..41%..51
> %
> > ..61
> > %..71%..81%..91%^M
> > Dump complete^M
> > 
>
> Can you show regular dmesg. Maybe some driver failed loading, and some 
> sysctls were leftover!

I don't see anything out of the ordinary here. Instead of dmesg, the 
console log from the serial console. It's early (been up for 10 minutes) 
and nothing jumps out at me. Disabling powerd has provided some stability.

My firewall also uses the same configuration, with powerd, but it's not 
under nearly the same load either. It's interesting to note the two 
machines that did panic did so within 90 minutes of each other and both at 
the time their builds had completed (I presume, as I was either in transit 
or consuming a meal or something at the time).

1  FreeBSD
2  FreeBSD
3  FreeBSD
5  Drive 1

F6 PXE
Boot:  1 
/boot/config: -Dh
/-\|/Consoles: internal video/keyboard  serial port  
BIOS drive A: is fd0
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS drive G: is disk4
|BIOS 636kB/3143552kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
(Fri Aug  2 19:46:46 PDT 2019 root@cwsys)
/-\|/Loading /boot/defaults/loader.conf
Loading /boot/device.hints
-\Loading /boot/loader.conf
Loading /boot/loader.conf.local
|Loading kernel...
/-\|/-/boot/kernel/kernel text=0x994a20 \|data=0xe0 data=0x12be98+0x2d3168 
/-\|/-syms=[0x8+0xee3e0\|/-+0x8+0x10e87d\|/-]
Loading configured modules...
\|/-/boot/kernel/filemon.ko \size 0x6ed8 at 0x11fd000
|/boot/kernel/kbdmux.ko /size 0xaad0 at 0x1204000
-\|/-/boot/kernel/dtraceall.ko size 0x3a58 at 0x120f000
loading required module 'profile'
\|//boot/kernel/profile.ko -size 0x4cf8 at 0x1213000
loading required module 'opensolaris'
\/boot/kernel/opensolaris.ko size 0xb858 at 0x1218000
loading required module 'dtrace'
|/-/boot/kernel/dtrace.ko \|/-size 0x61250 at 0x1224000
loading required module 'systrace_freebsd32'
\/boot/kernel/systrace_freebsd32.ko |size 0x183a0 at 0x1286000
loading required module 'systrace'
/-\/boot/kernel/systrace.ko |/size 0x18580 at 0x129f000
loading required module 'sdt'
-\|/boot/kernel/sdt.ko size 0x4598 at 0x12b8000
loading required module 'fasttrap'
/-\|//boot/kernel/fasttrap.ko -\|/-size 0x61518 at 0x12bd000
loading required module 'fbt'
\|//boot/kernel/fbt.ko size 0x68c0 at 0x131f000
loading required module 'dtnfscl'
-\|/boot/kernel/dtnfscl.ko size 0x6b38 at 0x1326000
loading required module 'dtmalloc'
/-\/boot/kernel/dtmalloc.ko |size 0x3e10 at 0x132d000
/-\|//boot/kernel/amdtemp.ko size 0x4e70 at 0x1331000
loading required module 'amdsmn'
-\|/boot/kernel/amdsmn.ko size 0x3e30 at 0x1336000
/-\/boot/kernel/cpufreq.ko |size 0x148c8 at 0x133a000
/-\/boot/kernel/geom_mirror.ko |size 0x221e8 at 0x134f000
/-\/boot/kernel/zfs.ko |size 0x3a6198 at 0x1372000
/-\|/-/boot/entropy \size=0x1000
can't find 'random'
/boot/kernel/sem.ko /size 0x8a88 at 0x171a000
boot/kernel/if_nfe.ko /size 0x11ec0 at 0x1723000
boot/kernel/if_sk.ko \size 0x102a0 at 0x1735000

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] 
in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting 
[/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel] in 5 
seconds... Booting [/boot/kernel/kernel] in 4 seconds... Booting 
[/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 
seconds... Booting [/boot/kernel/kernel] in 1 second... Booting 
[/boot/kernel/kernel]...
|/GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #745 r357066M: Thu Jan 23 18:25:43 PST 2020
    root@cwsys:/export/obj/opt/src/svn-current/amd64.amd64/sys/BREAK amd64
FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git 
c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
VT(vga): text 80x25
CPU: AMD Phenom(tm) II X4 945 Processor (3013.95-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f43  Family=0x10  Model=0x4  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M
CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3D
Now!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,
IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=64
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8268652544 (7885 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 
32/8 (20200110/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 
16/8 (20200110/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 
(20200110/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 
(20200110/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/8 
(20200110/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using 
default 32 (20200110/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using 
default 16 (20200110/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using 
default 32 (20200110/tbfadt-850)
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23
Launching APs: 1 3 2
Timecounter "TSC-low" frequency 1506974596 Hz quality 800
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 
13.0.
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
acpi0: <Nvidia ASUSACPI>
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element 
- \_PR_.CPU0 (20200110/dspkginit-605)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff irq 0,8 on 
acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <nVidia nForce MCP55 USB Controller> mem 0xfe02f000-0xfe02ffff irq 
21 at device 2.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff 
irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 4.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem 
0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf200-0xf20f mem 
0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port 
0xf100-0xf107,0xf000-0xf003,0xef00-0xef07,0xee00-0xee03,0xed00-0xed0f mem 
0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0
ata6: <ATA channel> at channel 0 on atapci3
ata7: <ATA channel> at channel 1 on atapci3
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xdc00-0xdcff mem 
0xfdefc000-0xfdefffff irq 16 at device 6.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:13:46:8f:ca:75
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
skc1: <D-Link DGE-530T Gigabit Ethernet> port 0xd800-0xd8ff mem 
0xfdef8000-0xfdefbfff irq 17 at device 7.0 on pci1
skc1: DGE-530T Gigabit Ethernet Adapter rev. (0x1)
sk1: <Marvell Semiconductor, Inc. Yukon> on skc1
sk1: Ethernet address: 00:11:95:e3:94:04
miibus1: <MII bus> on sk1
e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
skc2: <D-Link DGE-530T Gigabit Ethernet> port 0xd400-0xd4ff mem 
0xfdef4000-0xfdef7fff irq 18 at device 8.0 on pci1
skc2: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk2: <Marvell Semiconductor, Inc. Yukon> on skc2
sk2: Ethernet address: 00:17:9a:ba:a7:ee
miibus2: <MII bus> on sk2
e1000phy2: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus2
e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem 
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 22 at 
device 8.0 on pci0
miibus3: <MII bus> on nfe0
e1000phy3: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus3
e1000phy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, 
auto-flow
nfe0: Using defaults for TSO: 65518/35/2048
nfe0: Ethernet address: 00:1e:8c:64:28:4c
pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 
0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at 
device 0.0 on pci2
vgapci0: Boot video device
pci2: <multimedia, HDA> at device 0.1 (no driver attached)
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid 
PNP0900 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller 
LCG from 1988
ugen0.1: <nVidia OHCI root HUB> at usbus0
ugen1.1: <nVidia EHCI root HUB> at usbus1
uhub0Trying to mount root from ufs:/dev/mirror/gm0a [rw]...
 on usbus0
Root mount waiting for:uhub1 usbus0 on usbus1
 usbus1uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on 
usbus0
 CAMuhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
usbus1

uhub0: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1 CAM
ada0 at ata0 bus 0 scbus0 target 1 lun 0
ada0: <Maxtor 6Y120L0 YAR41BW0> ATA-7 device
ada0: Serial Number Y321KK0E
ada0: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada0: 117246MB (240121728 512 byte sectors)
ada1 at ata2 bus 0 scbus2 target 0 lun 0
ada1: <ST3500418AS CC38> ATA8-ACS SATA 2.x device
ada1: Serial Number 6VMRPHP3
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada1: 476940MB (976773168 512 byte sectors)
ada2 at ata3 bus 0 scbus3 target 0 lun 0
ada2: <ST500DM002-1BC142 JC4B> ATA8-ACS SATA 3.x device
ada2: Serial Number W2A7GHLB
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 476940MB (976773168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ata4 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD3200AAKS-00B3A0 01.03A01> ATA8-ACS SATA 2.x device
ada3: Serial Number WD-WMAT10341892
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 305245MB (625142448 512 byte sectors)
ada4 at ata5 bus 0 scbus5 target 0 lun 0
ada4: <ST3320620AS 3.AAE> ATA-7 SATA 2.x device
ada4: Serial Number 3QF0Y905
ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada4: 305245MB (625142448 512 byte sectors)
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM_MIRROR: Device mirror/gm0 launched (3/3).
GEOM_MIRROR: Device mirror/gm1 launched (1/3).
GEOM_MIRROR: Device gm1: rebuilding provider ada1s2.
GEOM_MIRROR: Device gm1: rebuilding provider ada0s2.
uhub1: 10 ports with 10 removable, self powered
mountroot: waiting for device /dev/mirror/gm0a...
WARNING: / was not properly dismounted
Setting hostuuid: 600c518b-9c7a-da11-bad8-0018f3a0dca4.
Setting hostid: 0x05cfd84b.
Starting file system checks:
** SU+J Recovering /dev/mirror/gm0a
** Reading 16777216 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 3 journal records in 512 bytes for 18.75% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.

***** FILE SYSTEM MARKED CLEAN *****
** SU+J Recovering /dev/mirror/gm1e
** Reading 8388608 byte journal from inode 4.
** SU+J Recovering /dev/mirror/gm0f
** Reading 25165824 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 1 journal records in 512 bytes for 6.25% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.

***** FILE SYSTEM MARKED CLEAN *****
** SU+J Recovering /dev/mirror/gm1a
** Reading 16777216 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
** SU+J Recovering /dev/mirror/gm0d
** Reading 16777216 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 1 journal records in 512 bytes for 6.25% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.

***** FILE SYSTEM MARKED CLEAN *****
** SU+J Recovering /dev/mirror/gm0e
** Reading 8388608 byte journal from inode 4.
** SU+J Recovering /dev/mirror/gm1f
** Reading 25165824 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
** SU+J Recovering /dev/mirror/gm1d
** Reading 16777216 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
Mounting local filesystems:.
Mounting ZFS filesystems: (94/170)(148/170)(170/170)
kldload: can't load io: module already loaded or in kernel
kldload: can't load nullfs: module already loaded or in kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib 
/usr/local/lib/compat/pkg /usr/local/krb5/lib /usr/local/kde4/lib 
/usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/dovecot 
/usr/local/lib/e2fsprogs /usr/local/lib/freeradius-3.0.19 
/usr/local/lib/gcc10 /usr/local/lib/gcc48 /usr/local/lib/gcc5 
/usr/local/lib/gcc6 /usr/local/lib/gcc8 /usr/local/lib/gcc9 
/usr/local/lib/graphviz /usr/local/lib/httrack /usr/local/lib/itcl3.4 
/usr/local/lib/jitsi/lib/native /usr/local/lib/mysql 
/usr/local/lib/mysql/plugin /usr/local/lib/nss /usr/local/lib/opencollada 
/usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/perl5/5.28/mach/CORE 
/usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/pgtcl 
/usr/local/lib/pidgin /usr/local/lib/pth /usr/local/lib/qt5 
/usr/local/lib/samba4 /usr/local/lib/xrdp /usr/local/libexec/openldap 
/usr/local/llvm-devel/lib /usr/local/llvm60/lib /usr/local/llvm70/lib 
/usr/local/llvm80/lib /usr/local/llvm90/lib /usr/local/share/chromium
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
Setting hostname: cwsys.
Additional TCP/IP options: rfc1323 extensions=NO.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET
_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
sk0: link state changed to DOWN
GEOM_MIRROR: Device gm1: rebuilding provider ada1s2 finished.
sk0: link state changed to UP
sk1: link state changed to DOWN
sk1: link state changed to UP
nfe0: link state changed to DOWN
nfe0: link state changed to UP
Starting Network: lo0 sk0 sk1 nfe0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
	ether 00:13:46:8f:ca:75
	inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
	inet 10.1.1.20 netmask 0xffffffff broadcast 10.1.1.20
	inet6 fe80::213:46ff:fe8f:ca75%sk0 prefixlen 64 scopeid 0x1
	inet6 fc00:1:1:1::1 prefixlen 64
	inet6 fc00:1:1:1:213:46ff:fe8f:ca75 prefixlen 64 autoconf
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
sk1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
	ether 00:11:95:e3:94:04
	inet 10.1.2.200 netmask 0xffffffff broadcast 10.1.2.255
	inet6 fe80::211:95ff:fee3:9404%sk1 prefixlen 64 scopeid 0x2
	inet6 fc00:1:1:2::64 prefixlen 64
	inet6 fc00:1:1:2:211:95ff:fee3:9404 prefixlen 64 autoconf
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MA
GIC,VLAN_HWTSO,LINKSTATE>
	ether 00:1e:8c:64:28:4c
	inet 10.1.2.1 netmask 0xffffff00 broadcast 10.1.2.255
	inet6 fe80::21e:8cff:fe64:284c%nfe0 prefixlen 64 scopeid 0x4
	inet6 fc00:1:1:2::1 prefixlen 64
	inet6 fc00:1:1:2:21e:8cff:fe64:284c prefixlen 64 autoconf
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
Starting devd.
sk2: link state changed to UP
Starting Network: sk2.
sk2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
	ether 00:17:9a:ba:a7:ee
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Cannot 'start' uhidd. Set uhidd_enable to YES in /etc/rc.conf or use 
'onestart' instead of 'start'.
Cannot 'start' uhidd. Set uhidd_enable to YES in /etc/rc.conf or use 
'onestart' instead of 'start'.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host cwfw3: gateway 10.1.2.254
/etc/rc: WARNING: route_gp_router not found.
add net default: gateway 10.1.1.254
Additional inet routing options: ignore ICMP redirect=YES log ICMP 
redirect=YES/etc/rc: WARNING: $arpproxy_all is not set properly - see 
rc.conf(5).
.
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net default: gateway fc00:1:1:1::254 fib 0: route already in table
/etc/rc: WARNING: $router_enable is obsolete.  Use $routed_enable instead.
/etc/rc: WARNING: $router is obsolete.  Use $routed_program instead.
/etc/rc: WARNING: $router_flags is obsolete.  Use $routed_flags instead.
Starting rtsold.
/etc/rc: WARNING: $cloudinit_enable is not set properly - see rc.conf(5).
Creating and/or trimming log files.
Starting syslogd.
Setting date via ntp.
23 Jan 21:30:22 ntpdate[2394]: step time server fc00:1:1:1::fffe offset 
-0.798374 sec
Starting rpcbind.
NFS access cache time=0
Starting kdc.
Jan 23 21:30:50 cwsys krb5kdc[2476]: preauth pkinit failed to initialize: 
PKINIT initialization failed: No pkinit_identity supplied for realm 
CWSENT.COM
Jan 23 21:30:50 cwsys krb5kdc[2476]: preauth spake failed to initialize: No 
SPAKE preauth groups configured
Updating CPU Microcode...
CPU: AMD Phenom(tm) II X4 945 Processor (3013.95-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f43  Family=0x10  Model=0x4  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M
CA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3D
Now!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,
IBS,SKINIT,WDT>
  SVM: NP,NRIP,NAsids=64
  TSC: P-state invariant
Done.
No core dumps found.
Setting NIS domain: cwsent.com.
Starting ypserv.
Starting ypbind.
Clearing /tmp.
Starting nfsuserd.
Starting mountd.
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd': symbolic link in export path or statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn': symbolic link in export path or statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/current': symbolic link in export path or 
statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/ntp': symbolic link in export path or statfs 
failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/doc': symbolic link in export path or statfs 
failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/ports': symbolic link in export path or statfs 
failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/stable9': symbolic link in export path or 
statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/stable10': symbolic link in export path or 
statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/vendor': symbolic link in export path or 
statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/vendor-crypto': symbolic link in export path 
or statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line 
'/export/home/cy/freebsd/svn/vendor-sys': symbolic link in export path or 
statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export3': 
symbolic link in export path or statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export4': 
symbolic link in export path or statfs failed
Jan 23 21:31:00 cwsys mountd[2568]: bad exports list line '/export5': 
symbolic link in export path or statfs failed
Jan 23 21:31:01 cwsys mountd[2568]: can't get address info for host 
cwsent_internal_hosts
Jan 23 21:31:01 cwsys mountd[2568]: bad host cwsent_internal_hosts, skipping
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/		-ro -alldirs 
-maproot': no valid entries
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/nullfs/export/home/ftp/pub': symbolic link in export path or 
statfs failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/dsk02/src/cvs-ports/ports': symbolic link in export path or statfs failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/usr/local': symbolic link in export path or statfs 
failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/usr/compat': symbolic link in export path or statfs 
failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/var/lib': symbolic link in export path or statfs 
failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/var/qmail': symbolic link in export path or statfs 
failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/var/db/pkg': symbolic link in export path or statfs 
failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/var/db/ports': symbolic link in export path or statfs 
failed
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line 
'/export/upgrade/root/var/db/rarian': symbolic link in export path or 
statfs failed
Starting nfsd.
Starting statd.
Jan 23 21:31:01 cwsys mountd[2568]: can't change attributes for /export: 
netcred already exists for given addr/mask
Jan 23 21:31:01 cwsys mountd[2568]: bad exports list line '/export	-alldirs 
-maproot'
Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for 
/export/home: netcred already exists for given addr/mask
Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/home	
-alldirs -maproot'
Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for 
/export/home/cschuber: netcred already exists for given addr/mask
Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line 
'/export/home/cschuber	-alldirs -maproot'
Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for 
/export/home/cy: netcred already exists for given addr/mask
Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/home/cy	
-alldirs -maproot'
Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for 
/export/local-ports: netcred already exists for given addr/mask
Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line 
'/export/local-ports	-alldirs -maproot'
Jan 23 21:31:02 cwsys mountd[2568]: can't change attributes for 
/export/obj: netcred already exists for given addr/mask
Jan 23 21:31:02 cwsys mountd[2568]: bad exports list line '/export/obj	
-alldirs -maproot'
Starting lockd.
Starting amd.
GEOM_MIRROR: Device gm1: rebuilding provider ada0s2 finished.
/etc/rc: WARNING: $xrdp_sesman_enable is not set properly - see rc.conf(5).
Starting default mousedmoused: unable to open /dev/psm0: No such file or 
directory
.
Starting local daemons:mounting late nullfs filesystems:reloading 
ldconfig:ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib 
/usr/local/lib/compat/pkg /usr/local/krb5/lib /usr/local/kde4/lib 
/usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/dovecot 
/usr/local/lib/e2fsprogs /usr/local/lib/freeradius-3.0.19 
/usr/local/lib/gcc10 /usr/local/lib/gcc48 /usr/local/lib/gcc5 
/usr/local/lib/gcc6 /usr/local/lib/gcc8 /usr/local/lib/gcc9 
/usr/local/lib/graphviz /usr/local/lib/httrack /usr/local/lib/itcl3.4 
/usr/local/lib/jitsi/lib/native /usr/local/lib/mysql 
/usr/local/lib/mysql/plugin /usr/local/lib/nss /usr/local/lib/opencollada 
/usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/perl5/5.28/mach/CORE 
/usr/local/lib/perl5/5.30/mach/CORE /usr/local/lib/pgtcl 
/usr/local/lib/pidgin /usr/local/lib/pth /usr/local/lib/qt5 
/usr/local/lib/samba4 /usr/local/lib/xrdp /usr/local/libexec/openldap 
/usr/local/llvm-devel/lib /usr/local/llvm60/lib /usr/local/llvm70/lib 
/usr/local/llvm80/lib /usr/local/llvm90/lib /usr/local/share/chromium
32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
starting local daemons: kadmindStopping mountd.
Waiting for PIDS: 2578.
Starting mountd.
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd': symbolic link in export path or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn': symbolic link in export path or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/current': symbolic link in export path or 
statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/ntp': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/doc': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/ports': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/stable9': symbolic link in exporJan 23 
21:31:11 cwsys mountd[2700]: can't get address info for host 
cwsent_internal_hosts
Jan 23 21:31:11 cwsys mountd[2700]: bad host cwsent_internal_hosts, skipping
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/		-ro -alldirs 
-mJan 23 21:31:12 cwsys mountd[2700]: can't change attributes for /export: 
netcred already exists for given addr/mask
Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export	-alldirs 
-maproot'
Jan 23 21:31:12 cwsys mountd[2700]: can't change attributes for 
/export/home: netcred already exists for given addr/mask
Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export/home	
-alldirs -maproot'
Jan 23 21:31:12 cwsys mountd[2700]: can't change attributes for 
/export/hoJan 23 21:31:12 cwsys mountd[2700]: can't change attributes for 
/export/local-ports: netcred already exists for given addr/mask
Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line 
'/export/local-ports	-alldirs -maproot'
Jan 23 21:31:12 cwt path or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/stable10': symbolic link in export path or 
statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/vendor': symbolic link in export path or 
statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/vendor-crypto': symbolic link in export path 
or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/home/cy/freebsd/svn/vendor-sys': symbolic link in export path or 
statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export3': 
symbolic link in export path or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export4': 
symbolic link in export path or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line '/export5': 
symbolic link in export path or statfs failed
aproot': no valid entries
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/nullfs/export/home/ftp/pub': symbolic link in export path or 
statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/dsk02/src/cvs-ports/ports': symbolic link in export path or statfs failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/usr/local': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/usr/compat': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/var/lib': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/var/qmail': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/var/db/pkg': symbolic link in export path or statfs 
failed
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/var/db/ports': symbolic link in export path or statfs 
failed
me/cschuber: netcred already exists for given addr/mask
Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line 
'/export/home/cschuber	-alldirs -maproot'
Jan 23 21:31:12 cwsys mountd[2700]: can't change attributes for 
/export/home/cy: netcred already exists for given addr/mask
Jan 23 21:31:11 cwsys mountd[2700]: bad exports list line 
'/export/upgrade/root/var/db/rarian': symbolic link in export path or 
statfs failed
Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/export/home/cy	
-alldirs -maproot'
sys mountd[2700]: can't change attributes for /export/obj: netcred already 
exists for given addr/mask
Jan 23 21:31:12 cwsys mountd[2700]: bad exports list line '/exportSecurity 
policy loaded: MAC/ntpd (mac_ntpd)
/obj	-alldirs -maproot'
vfs.zfs.arc_meta_limit: 1810719744 -> 7242878976
.
.
Starting lpd.
chkprintcap: foomatic: /var/spool/lpd/foomatic: No such file or directory
chkprintcap: hpl7780: /var/spool/lpd/hpl7780: No such file or directory
chkprintcap: hp5940-raw: /var/spool/lpd/hp5940: No such file or directory
lpd: 3 errors in printcap file, exiting
/etc/rc: WARNING: failed to start lpd
Updating motd:.
Mounting late filesystems:.
Starting nscd.
Starting ntpd.
Updating /var/run/os-release done.
Starting powerd.
Starting yppasswdd.
rpc.yppasswdd: master of passwd.byname is slippy, but we are cwsys
rpc.yppasswdd: this host is not the NIS master server for the cwsent.com 
domain -- aborting
/etc/rc: WARNING: failed to start yppasswdd
Starting doinkd.
Starting nut_upsmon.
Network UPS Tools upsmon 2.7.4
kill: No such process
UPS: cps@cwfw (master) (power value 1)
UPS: cps@cwfw2 (master) (power value 1)
Using power down flag file /var/run/nut_killpower
Starting smartd.
Performing sanity check on sshd configuration.
Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format
Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format
Could not load host key: /etc/ssh/ssh_host_rsa_key
Starting sshd.
Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format
Error loading host key "/etc/ssh/ssh_host_rsa_key": invalid format
Could not load host key: /etc/ssh/ssh_host_rsa_key
/etc/rc: WARNING: $pfstatd_enable is not set properly - see rc.conf(5).
Configuring vt: keyrate blanktime screensaver allscreens.
doveconf: Error: t_readlink(/var/run/dovecot/dovecot.conf) failed: 
readlink() failed: No such file or directory
Starting sendmail.
Starting sendmail_msp_queue.
/usr/local/etc/doormand/doormand.cf does not exist.
Starting cron.
/etc/rc: WARNING: $cloudinit_enable is not set properly - see rc.conf(5).
cbsd: no such /cbsd.conf
Starting anacron.
/etc/rc: WARNING: $jail_enable is not set properly - see rc.conf(5).
Local package initialization: cvsupd.: cannot open 
/usr/local/etc/cvsup/config.sh: No such file or directory
 jailserror: ed0: No such device exists (BIOCSETIF failed: Device not 
configured)
Unable to read the configuration file: No such file or directory at 
/usr/local/lib/perl5/site_perl/Jail.pm line 50.
Compilation failed in require at /usr/local/sbin/jailadmin Access to, or 
unauthorized use of data on this computer by any person other
than authorized person(s) or owner(s) of an account is strictly prohibited
and may result in legal action against such person.


FreeBSD/amd64 (cwsys) (console)


-- 
Cheers,
Cy Schubert <Cy.Schubert@cschubert.com>
FreeBSD UNIX:  <cy@FreeBSD.org>   Web:  http://www.FreeBSD.org

	The need of the many outweighs the greed of the few.





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202001241302.00OD2d44008368>