Date: Mon, 13 May 2002 17:32:04 +0200 From: alan.edmonds@t-motion.net To: john@veidit.net, alan.edmonds@t-motion.net Cc: current@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG Subject: RE: Problem with Intel 2011b Message-ID: <5D90F2332B50D411BE8A00209412104C0385090F@QHS63>
next in thread | raw e-mail | index | archive | help
I haven't tried the NEWCARD stuff (it panics my hp 510 - 16bit bridge chips)
so I can't comment on that.
Did you try booting with the card installed? If you boot verbose
(boot -v) should see it dump the pci id contents. Also check
if /etc/defaults/pccard.conf contains an entry for the card. The
version of -current I have (maybe a few days old) has no entry
explicitly for a 2011B. It might use the same entry as a 2011,
but might have a different id string. I've exceeded my knowledge
at this point, so I'll stop speculating.
Over to you, Warner :-)
-----Original Message-----
From: John Angelmo [mailto:john@veidit.net]
Sent: 13 May 2002 16:15
To: alan.edmonds@t-motion.net
Cc: current@FreeBSD.ORG; freebsd-mobile@FreeBSD.ORG
Subject: Re: Problem with Intel 2011b
alan.edmonds@t-motion.net wrote:
> I have used the non-B version with -current and an IBM thinkpad.
>
> What kind of laptop? dmesg output would be nice.
> Do any other cards work?
>
> Alan Edmonds
>
> -----Original Message-----
> From: John Angelmo [mailto:john@veidit.net]
> Sent: 13 May 2002 15:02
> To: current
> Cc: freebsd-mobile
> Subject: Problem with Intel 2011b
>
>
> Hello
>
> I just got my hands on a Intel 2011b Wireless card, I'm running FreeBSD
> current (dated just before gcc 3.1).
> Now my problem is that I insert the card and well nothing happens, the
> system gets locked, when I remove the card I everything starts working
> once again, and it says it can't manage card ("null"), ("null")
>
> Any one got any idea?
>
> mvh /John
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
Well 2011b is a 32bit card (if I'm not mistaking) the 2011 card is the
same as the symbol card but the 2011b card uses 3.3v instead of 5v
So perhaps I need to use:
device pccbb # cardbus (yenta) bridge
device pccard
device cardbus
instead of:
device card # pccard bus
device pcic # PCMCIA bridge
What else can I do?
I use a C Series Lifebook from Fujitsu Siemens
/John
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5D90F2332B50D411BE8A00209412104C0385090F>