Date: Fri, 5 Aug 2005 06:51:42 +0500 From: "DeadMan Xia ...." <deadmanxia@gmail.com> To: freebsd-questions@freebsd.org Subject: bge0: WatchDog Timedout -- resetting in FreeBSD 5.3 Message-ID: <dac35acb050804185176cd9767@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Is there no one else, who can help me out, from this bge0: WatchDog Time Out -- resetting ..... I m using FreeBSD 5.3, on Dell Power Edge 6650 Quad Processor Machine, my system get stuck while i m accessing it through ssh. well after some time , when i acces the machine & check , /var/log/messages ,, i get bge1: WatchDog Timedout -- resetting error. Is there any one , to tap my back & get me off from this headhac,,, Here is the dmesg for my system , ACPI APIC Table: <DELL PE6650 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) MP CPU 2.20GHz (2192.90-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf26 Stepping =3D 6 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,= MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory =3D 2147352576 (2047 MB) avail memory =3D 2095886336 (1998 MB) FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE6650> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0xec00-0xecff mem 0xfe10= 2000- 0xfe102fff irq 16 at device 3.0 on pci0 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs pci0: <display, VGA> at device 4.0 (no driver attached) atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x8b0-0x8bf,0x376,0x170= -0x17 7,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 10 at = devic e 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab0: <PCI-ISA bridge> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib1 amr0: <LSILogic MegaRAID> mem 0xfce00000-0xfce0ffff irq 21 at device 1.0 on= pci3 amr0: [GIANT-LOCKED] amr0: <LSILogic PERC 4/DC> Firmware 350O, BIOS 1.09, 128MB RAM pcib2: <ACPI Host-PCI bridge> on acpi0 pci8: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem 0xfcd10000-= 0xfcd 1ffff irq 17 at device 1.0 on pci8 miibus0: <MII bus> on bge0 brgphy0: <BCM5411 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000b= aseTX -FDX, auto bge0: Ethernet address: 00:11:43:db:68:2a bge1: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem 0xfcd00000-= 0xfcd 0ffff irq 18 at device 2.0 on pci8 miibus1: <MII bus> on bge1 brgphy1: <BCM5411 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000b= aseTX -FDX, auto bge1: Ethernet address: 00:11:43:db:68:2b pcib3: <ACPI Host-PCI bridge> on acpi0 pci9: <ACPI PCI bus> on pcib3 pcib4: <ACPI Host-PCI bridge> on acpi0 pci14: <ACPI PCI bus> on pcib4 pcib5: <ACPI Host-PCI bridge> on acpi0 pci19: <ACPI PCI bus> on pcib5 pcib6: <ACPI Host-PCI bridge> on acpi0 pci24: <ACPI PCI bus> on pcib6 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default = to de ny, logging unlimited acd0: CDRW <SAMSUNG CDRW/DVD SN-324S/U304> at ata0-master UDMA33 Waiting 15 seconds for SCSI devices to settle amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 69880MB (143114240 sectors) RAID 1 (optimal) amrd1: <LSILogic MegaRAID logical drive> on amr0 amrd1: 139760MB (286228480 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 1x5 SCSI BP 1.1> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #2 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #7 Launched! Mounting root from ufs:/dev/amrd0s1a DeadMan Xia ,,,,,,
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?dac35acb050804185176cd9767>