Date: Thu, 11 Mar 2010 22:05:12 +0000 (UTC) From: Andrew Thompson <thompsa@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r205042 - in head/sys/dev/usb: . wlan Message-ID: <201003112205.o2BM5C56079446@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: thompsa Date: Thu Mar 11 22:05:12 2010 New Revision: 205042 URL: http://svn.freebsd.org/changeset/base/205042 Log: - Integrate latest driver code from OpenBSD - Drain our tasks from the ieee80211 taskqueue - Add more IDs Submitted by: Akinori Furukoshi Modified: head/sys/dev/usb/usbdevs head/sys/dev/usb/wlan/if_run.c head/sys/dev/usb/wlan/if_runreg.h head/sys/dev/usb/wlan/if_runvar.h Modified: head/sys/dev/usb/usbdevs ============================================================================== --- head/sys/dev/usb/usbdevs Thu Mar 11 22:01:48 2010 (r205041) +++ head/sys/dev/usb/usbdevs Thu Mar 11 22:05:12 2010 (r205042) @@ -270,6 +270,7 @@ vendor LACIE 0x059f LaCie vendor FUJIFILM 0x05a2 Fuji Film vendor ARC 0x05a3 ARC vendor ORTEK 0x05a4 Ortek +vendor CISCOLINKSYS3 0x05a6 Cisco-Linksys vendor BOSE 0x05a7 Bose vendor OMNIVISION 0x05a9 OmniVision vendor INSYSTEM 0x05ab In-System Design @@ -539,6 +540,7 @@ vendor RIM 0x0fca Research In Motion vendor DYNASTREAM 0x0fcf Dynastream Innovations vendor QUALCOMM 0x1004 Qualcomm vendor APACER 0x1005 Apacer +vendor MOTOROLA4 0x100d Motorola vendor DESKNOTE 0x1019 Desknote vendor GIGABYTE 0x1044 GIGABYTE vendor WESTERN 0x1058 Western Digital @@ -635,6 +637,7 @@ vendor LINKSYS3 0x1915 Linksys vendor QUALCOMMINC 0x19d2 Qualcomm, Incorporated vendor WCH2 0x1a86 QinHeng Electronics vendor STELERA 0x1a8d Stelera Wireless +vendor OVISLINK 0x1b75 OvisLink vendor TCTMOBILE 0x1bbb TCT Mobile vendor TELIT 0x1bc7 Telit vendor MPMAN 0x1cae MpMan @@ -676,6 +679,7 @@ vendor 3COM2 0x6891 3Com vendor EDIMAX 0x7392 Edimax vendor INTEL 0x8086 Intel vendor INTEL2 0x8087 Intel +vendor ALLWIN 0x8516 ALLWIN Tech vendor SITECOM2 0x9016 Sitecom vendor MOSCHIP 0x9710 MosChip Semiconductor vendor MARVELL 0x9e88 Marvell Technology Group Ltd. @@ -755,6 +759,7 @@ product ACCTON RT3070_1 0xa701 RT3070 product ACCTON RT3070_2 0xa702 RT3070 product ACCTON RT2870_1 0xb522 RT2870 product ACCTON RT3070_3 0xc522 RT3070 +product ACCTON RT3070_5 0xd522 RT3070 product ACCTON ZD1211B 0xe501 ZD1211B /* Aceeca products */ @@ -887,6 +892,15 @@ product ALTEC ASC495 0xff05 ASC495 Spea /* Allied Telesyn International products */ product ALLIEDTELESYN ATUSB100 0xb100 AT-USB100 +/* ALLWIN Tech products */ +product ALLWIN RT2070 0x2070 RT2070 +product ALLWIN RT2770 0x2770 RT2770 +product ALLWIN RT2870 0x2870 RT2870 +product ALLWIN RT3070 0x3070 RT3070 +product ALLWIN RT3071 0x3071 RT3071 +product ALLWIN RT3072 0x3072 RT3072 +product ALLWIN RT3572 0x3572 RT3572 + /* AlphaSmart, Inc. products */ product ALPHASMART DANA_KB 0xdbac AlphaSmart Dana Keyboard product ALPHASMART DANA_SYNC 0xdf00 AlphaSmart Dana HotSync @@ -989,7 +1003,8 @@ product ASUS RT2870_2 0x1732 RT2870 product ASUS RT2870_3 0x1742 RT2870 product ASUS RT2870_4 0x1760 RT2870 product ASUS RT2870_5 0x1761 RT2870 -product ASUS RT3070 0x1784 RT3070 +product ASUS USBN13 0x1784 USB-N13 +product ASUS RT3070_1 0x1790 RT3070 product ASUS P535 0x420f ASUS P535 PDA product ASUS GMSC 0x422f ASUS Generic Mass Storage product ASUS RT2570 0x1706 RT2500USB Wireless Adapter @@ -1147,7 +1162,8 @@ product CISCOLINKSYS HU200TS 0x001a HU20 product CISCOLINKSYS WUSB54GC 0x0020 WUSB54GC product CISCOLINKSYS WUSB54GR 0x0023 WUSB54GR product CISCOLINKSYS WUSBF54G 0x0024 WUSBF54G -product CISCOLINKSYS2 RT3070 0x4001 RT3070 +product CISCOLINKSYS2 RT3070 0x4001 RT3070 +product CISCOLINKSYS3 RT3070 0x0101 RT3070 /* CMOTECH products */ product CMOTECH CNU510 0x5141 CDMA Technologies USB modem @@ -1174,6 +1190,8 @@ product CONCEPTRONIC AR5523_2 0x7811 AR5 product CONCEPTRONIC AR5523_2_NF 0x7812 AR5523 (no firmware) product CONCEPTRONIC2 C54RU 0x3c02 C54RU WLAN product CONCEPTRONIC2 C54RU2 0x3c22 C54RU +product CONCEPTRONIC2 RT3070_1 0x3c08 RT3070 +product CONCEPTRONIC2 RT3070_2 0x3c11 RT3070 product CONCEPTRONIC2 VIGORN61 0x3c25 VIGORN61 product CONCEPTRONIC2 RT2870_1 0x3c06 RT2870 product CONCEPTRONIC2 RT2870_2 0x3c07 RT2870 @@ -1326,12 +1344,14 @@ product DLINK2 DWA111 0x3c06 DWA-111 product DLINK2 RT2870_1 0x3c09 RT2870 product DLINK2 DWA110 0x3c07 DWA-110 product DLINK2 RT3072 0x3c0a RT3072 +product DLINK2 RT3072_1 0x3c0b RT3072 product DLINK2 RT3070_1 0x3c0d RT3070 product DLINK2 RT3070_2 0x3c0e RT3070 product DLINK2 RT3070_3 0x3c0f RT3070 product DLINK2 RT2870_2 0x3c11 RT2870 product DLINK2 DWA130 0x3c13 DWA-130 product DLINK2 RT3070_4 0x3c15 RT3070 +product DLINK2 RT3070_5 0x3c16 RT3070 product DLINK3 DWM652 0x3e04 DWM-652 /* DMI products */ @@ -1902,6 +1922,7 @@ product LINKSYS4 WUSB100 0x0070 WUSB100 product LINKSYS4 WUSB600N 0x0071 WUSB600N product LINKSYS4 WUSB54GCV2 0x0073 WUSB54GC v2 product LINKSYS4 WUSB54GCV3 0x0077 WUSB54GC v3 +product LINKSYS4 RT3070 0x0078 RT3070 product LINKSYS4 WUSB600NV2 0x0079 WUSB600N v2 /* Logitech products */ @@ -1975,6 +1996,8 @@ product MELCO KG54L 0x00da WLI-U2-KG54L product MELCO WLIUCG300N 0x00e8 WLI-UC-G300N product MELCO SG54HG 0x00f4 WLI-U2-SG54HG product MELCO WLIUCAG300N 0x012e WLI-UC-AG300N +product MELCO RT2870_1 0x0148 RT2870 +product MELCO RT2870_2 0x0150 RT2870 product MELCO WLIUCGN 0x015d WLI-UC-GN /* Merlin products */ @@ -1995,7 +2018,9 @@ product MGE UPS2 0xffff MGE UPS SYSTEMS product MSI BT_DONGLE 0x1967 Bluetooth USB dongle product MSI RT3070_1 0x3820 RT3070 product MSI RT3070_2 0x3821 RT3070 +product MSI RT3070_8 0x3822 RT3070 product MSI RT3070_3 0x3870 RT3070 +product MSI RT3070_9 0x3871 RT3070 product MSI UB11B 0x6823 UB11B product MSI RT2570 0x6861 RT2570 product MSI RT2570_2 0x6865 RT2570 @@ -2004,7 +2029,9 @@ product MSI RT2573_1 0x6874 RT2573 product MSI RT2573_2 0x6877 RT2573 product MSI RT3070_4 0x6899 RT3070 product MSI RT3070_5 0x821a RT3070 +product MSI RT3070_10 0x822a RT3070 product MSI RT3070_6 0x870a RT3070 +product MSI RT3070_11 0x871a RT3070 product MSI RT3070_7 0x899a RT3070 product MSI RT2573_3 0xa861 RT2573 product MSI RT2573_4 0xa874 RT2573 @@ -2085,6 +2112,8 @@ product MOTOROLA2 A41XV32X 0x2a22 A41x/V product MOTOROLA2 E398 0x4810 E398 Mobile Phone product MOTOROLA2 USBLAN 0x600c USBLAN product MOTOROLA2 USBLAN2 0x6027 USBLAN +product MOTOROLA4 RT2770 0x9031 RT2770 +product MOTOROLA4 RT3070 0x9032 RT3070 /* MultiTech products */ product MULTITECH ATLAS 0xf101 MT5634ZBA-USB modem @@ -2255,6 +2284,9 @@ product OPTION MODHSXPA 0xd013 Globetro product OPTION ICON321 0xd031 Globetrotter HSUPA product OPTION ICON505 0xd055 Globetrotter iCON 505 +/* OvisLink product */ +product OVISLINK RT3072 0x3072 RT3072 + /* OQO */ product OQO WIFI01 0x0002 model 01 WiFi interface product OQO BT01 0x0003 model 01 Bluetooth interface @@ -2289,6 +2321,7 @@ product PARA RT3070 0x8888 RT3070 product PEGATRON RT2870 0x0002 RT2870 product PEGATRON RT3070 0x000c RT3070 product PEGATRON RT3070_2 0x000e RT3070 +product PEGATRON RT3070_3 0x0010 RT3070 /* Peracom products */ product PERACOM SERIAL1 0x0001 Serial @@ -2508,7 +2541,9 @@ product RALINK RT2870 0x2870 RT2870 product RALINK RT3070 0x3070 RT3070 product RALINK RT3071 0x3071 RT3071 product RALINK RT3072 0x3072 RT3072 +product RALINK RT3370 0x3370 RT3370 product RALINK RT3572 0x3572 RT3572 +product RALINK RT8070 0x8070 RT8070 product RALINK RT2570_3 0x9020 RT2500USB Wireless Adapter product RALINK RT2573_2 0x9021 RT2501USB Wireless Adapter @@ -2745,6 +2780,7 @@ product SITECOMEU RT3070_3 0x003c RT3070 product SITECOMEU RT3070_4 0x003d RT3070 product SITECOMEU RT3070 0x003e RT3070 product SITECOMEU WL608 0x003f WL-608 +product SITECOMEU RT3071 0x0040 RT3071 product SITECOMEU RT3072_1 0x0041 RT3072 product SITECOMEU RT3072_2 0x0042 RT3072 product SITECOMEU RT3072_3 0x0047 RT3072 @@ -2881,6 +2917,7 @@ product SURECOM RT2573 0x31f3 RT2573 /* Sweex products */ product SWEEX ZD1211 0x1809 ZD1211 +product SWEEX2 LW153 0x0153 LW153 product SWEEX2 LW303 0x0302 LW303 product SWEEX2 LW313 0x0313 LW313 @@ -2936,6 +2973,7 @@ product TOPRE HHKB 0x0100 HHKB Professi /* Toshiba Corporation products */ product TOSHIBA POCKETPC_E740 0x0706 PocketPC e740 +product TOSHIBA RT3070 0x0a07 RT3070 product TOSHIBA G450 0x0d45 G450 modem product TOSHIBA HSDPA 0x1302 G450 modem @@ -3116,3 +3154,4 @@ product ZYXEL M202 0x340a M-202 product ZYXEL G220V2 0x340f G-220 v2 product ZYXEL G202 0x3410 G-202 product ZYXEL RT2870_1 0x3416 RT2870 +product ZYXEL RT2870_2 0x341a RT2870 Modified: head/sys/dev/usb/wlan/if_run.c ============================================================================== --- head/sys/dev/usb/wlan/if_run.c Thu Mar 11 22:01:48 2010 (r205041) +++ head/sys/dev/usb/wlan/if_run.c Thu Mar 11 22:05:12 2010 (r205042) @@ -1,8 +1,9 @@ /* $FreeBSD$ */ /*- - * Copyright (c) 2008,2009 Damien Bergamini <damien.bergamini@free.fr> - * ported to FreeBSD by Akinori Furukoshi <moonlightakkiy@yahoo.ca> + * Copyright (c) 2008,2010 Damien Bergamini <damien.bergamini@free.fr> + * ported to FreeBSD by Akinori Furukoshi <moonlightakkiy@yahoo.ca> + * USB Consulting, Hans Petter Selasky <hselasky@freebsd.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -17,8 +18,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* release date Jan. 09, 2010 */ - #include <sys/cdefs.h> __FBSDID("$FreeBSD$"); @@ -107,11 +106,20 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT2870_3) }, { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT2870_4) }, { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT2870_5) }, + { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT3070) }, { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT3070_1) }, { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT3070_2) }, { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT3070_3) }, { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT3070_4) }, + { USB_VP(USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_RT3070_5) }, { USB_VP(USB_VENDOR_AIRTIES, USB_PRODUCT_AIRTIES_RT3070) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT2070) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT2770) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT2870) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT3070) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT3071) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT3072) }, + { USB_VP(USB_VENDOR_ALLWIN, USB_PRODUCT_ALLWIN_RT3572) }, { USB_VP(USB_VENDOR_AMIGO, USB_PRODUCT_AMIGO_RT2870_1) }, { USB_VP(USB_VENDOR_AMIGO, USB_PRODUCT_AMIGO_RT2870_2) }, { USB_VP(USB_VENDOR_AMIT, USB_PRODUCT_AMIT_CGWLUSB2GNR) }, @@ -122,6 +130,8 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_RT2870_3) }, { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_RT2870_4) }, { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_RT2870_5) }, + { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_USBN13) }, + { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_RT3070_1) }, { USB_VP(USB_VENDOR_ASUS2, USB_PRODUCT_ASUS2_USBN11) }, { USB_VP(USB_VENDOR_AZUREWAVE, USB_PRODUCT_AZUREWAVE_RT2870_1) }, { USB_VP(USB_VENDOR_AZUREWAVE, USB_PRODUCT_AZUREWAVE_RT2870_2) }, @@ -133,6 +143,8 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F6D4050V1) }, { USB_VP(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_RT2870_1) }, { USB_VP(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_RT2870_2) }, + { USB_VP(USB_VENDOR_CISCOLINKSYS2, USB_PRODUCT_CISCOLINKSYS2_RT3070) }, + { USB_VP(USB_VENDOR_CISCOLINKSYS3, USB_PRODUCT_CISCOLINKSYS2_RT3070) }, { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT2870_1) }, { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT2870_2) }, { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT2870_3) }, @@ -141,6 +153,8 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT2870_6) }, { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT2870_7) }, { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT2870_8) }, + { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT3070_1) }, + { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_RT3070_2) }, { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_VIGORN61) }, { USB_VP(USB_VENDOR_COREGA, USB_PRODUCT_COREGA_CGWLUSB300GNM) }, { USB_VP(USB_VENDOR_COREGA, USB_PRODUCT_COREGA_RT2870_1) }, @@ -157,7 +171,9 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_RT3070_2) }, { USB_VP(USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_RT3070_3) }, { USB_VP(USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_RT3070_4) }, + { USB_VP(USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_RT3070_5) }, { USB_VP(USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_RT3072) }, + { USB_VP(USB_VENDOR_DLINK2, USB_PRODUCT_DLINK2_RT3072_1) }, { USB_VP(USB_VENDOR_EDIMAX, USB_PRODUCT_EDIMAX_EW7717) }, { USB_VP(USB_VENDOR_EDIMAX, USB_PRODUCT_EDIMAX_EW7718) }, { USB_VP(USB_VENDOR_EDIMAX, USB_PRODUCT_EDIMAX_RT2870_1) }, @@ -178,6 +194,7 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_IODATA, USB_PRODUCT_IODATA_RT3072_2) }, { USB_VP(USB_VENDOR_IODATA, USB_PRODUCT_IODATA_RT3072_3) }, { USB_VP(USB_VENDOR_IODATA, USB_PRODUCT_IODATA_RT3072_4) }, + { USB_VP(USB_VENDOR_LINKSYS4, USB_PRODUCT_LINKSYS4_RT3070) }, { USB_VP(USB_VENDOR_LINKSYS4, USB_PRODUCT_LINKSYS4_WUSB100) }, { USB_VP(USB_VENDOR_LINKSYS4, USB_PRODUCT_LINKSYS4_WUSB54GCV3) }, { USB_VP(USB_VENDOR_LINKSYS4, USB_PRODUCT_LINKSYS4_WUSB600N) }, @@ -185,9 +202,13 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_LOGITEC, USB_PRODUCT_LOGITEC_RT2870_1) }, { USB_VP(USB_VENDOR_LOGITEC, USB_PRODUCT_LOGITEC_RT2870_2) }, { USB_VP(USB_VENDOR_LOGITEC, USB_PRODUCT_LOGITEC_RT2870_3) }, + { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_RT2870_1) }, + { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_RT2870_2) }, { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_WLIUCAG300N) }, { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_WLIUCG300N) }, { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_WLIUCGN) }, + { USB_VP(USB_VENDOR_MOTOROLA4, USB_PRODUCT_MOTOROLA4_RT2770) }, + { USB_VP(USB_VENDOR_MOTOROLA4, USB_PRODUCT_MOTOROLA4_RT3070) }, { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_1) }, { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_2) }, { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_3) }, @@ -195,10 +216,16 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_5) }, { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_6) }, { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_7) }, + { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_8) }, + { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_9) }, + { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_10) }, + { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT3070_11) }, + { USB_VP(USB_VENDOR_OVISLINK, USB_PRODUCT_OVISLINK_RT3072) }, { USB_VP(USB_VENDOR_PARA, USB_PRODUCT_PARA_RT3070) }, { USB_VP(USB_VENDOR_PEGATRON, USB_PRODUCT_PEGATRON_RT2870) }, { USB_VP(USB_VENDOR_PEGATRON, USB_PRODUCT_PEGATRON_RT3070) }, { USB_VP(USB_VENDOR_PEGATRON, USB_PRODUCT_PEGATRON_RT3070_2) }, + { USB_VP(USB_VENDOR_PEGATRON, USB_PRODUCT_PEGATRON_RT3070_3) }, { USB_VP(USB_VENDOR_PHILIPS, USB_PRODUCT_PHILIPS_RT2870) }, { USB_VP(USB_VENDOR_PLANEX2, USB_PRODUCT_PLANEX2_GWUS300MINIS) }, { USB_VP(USB_VENDOR_PLANEX2, USB_PRODUCT_PLANEX2_GWUSMICRON) }, @@ -212,7 +239,9 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT3070) }, { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT3071) }, { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT3072) }, + { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT3370) }, { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT3572) }, + { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT8070) }, { USB_VP(USB_VENDOR_SAMSUNG2, USB_PRODUCT_SAMSUNG2_RT2870_1) }, { USB_VP(USB_VENDOR_SENAO, USB_PRODUCT_SENAO_RT2870_1) }, { USB_VP(USB_VENDOR_SENAO, USB_PRODUCT_SENAO_RT2870_2) }, @@ -234,6 +263,7 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3070_2) }, { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3070_3) }, { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3070_4) }, + { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3071) }, { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3072_1) }, { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3072_2) }, { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_RT3072_3) }, @@ -243,8 +273,10 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_WL608) }, { USB_VP(USB_VENDOR_SPARKLAN, USB_PRODUCT_SPARKLAN_RT2870_1) }, { USB_VP(USB_VENDOR_SPARKLAN, USB_PRODUCT_SPARKLAN_RT3070) }, + { USB_VP(USB_VENDOR_SWEEX2, USB_PRODUCT_SWEEX2_LW153) }, { USB_VP(USB_VENDOR_SWEEX2, USB_PRODUCT_SWEEX2_LW303) }, { USB_VP(USB_VENDOR_SWEEX2, USB_PRODUCT_SWEEX2_LW313) }, + { USB_VP(USB_VENDOR_TOSHIBA, USB_PRODUCT_TOSHIBA_RT3070) }, { USB_VP(USB_VENDOR_UMEDIA, USB_PRODUCT_UMEDIA_RT2870_1) }, { USB_VP(USB_VENDOR_ZCOM, USB_PRODUCT_ZCOM_RT2870_1) }, { USB_VP(USB_VENDOR_ZCOM, USB_PRODUCT_ZCOM_RT2870_2) }, @@ -254,6 +286,7 @@ static const struct usb_device_id run_de { USB_VP(USB_VENDOR_ZINWELL, USB_PRODUCT_ZINWELL_RT3072_1) }, { USB_VP(USB_VENDOR_ZINWELL, USB_PRODUCT_ZINWELL_RT3072_2) }, { USB_VP(USB_VENDOR_ZYXEL, USB_PRODUCT_ZYXEL_RT2870_1) }, + { USB_VP(USB_VENDOR_ZYXEL, USB_PRODUCT_ZYXEL_RT2870_2) }, }; MODULE_DEPEND(run, wlan, 1, 1, 1); @@ -340,10 +373,12 @@ static int run_raw_xmit(struct ieee80211 const struct ieee80211_bpf_params *); static void run_start(struct ifnet *); static int run_ioctl(struct ifnet *, u_long, caddr_t); +static void run_set_agc(struct run_softc *, uint8_t); static void run_select_chan_group(struct run_softc *, int); static void run_set_rx_antenna(struct run_softc *, int); static void run_rt2870_set_chan(struct run_softc *, u_int); static void run_rt3070_set_chan(struct run_softc *, u_int); +static void run_rt3572_set_chan(struct run_softc *, u_int); static int run_set_chan(struct run_softc *, struct ieee80211_channel *); static void run_set_channel(struct ieee80211com *); static void run_scan_start(struct ieee80211com *); @@ -369,6 +404,7 @@ static int run_bbp_init(struct run_softc static int run_rt3070_rf_init(struct run_softc *); static int run_rt3070_filter_calib(struct run_softc *, uint8_t, uint8_t, uint8_t *); +static void run_rt3070_rf_setup(struct run_softc *); static int run_txrx_enable(struct run_softc *); static void run_init(void *); static void run_init_locked(struct run_softc *); @@ -398,8 +434,8 @@ static const struct rfprog { struct { uint8_t n, r, k; -} run_rf3020_freqs[] = { - RT3070_RF3020 +} rt3070_freqs[] = { + RT3070_RF3052 }; static const struct { @@ -407,6 +443,8 @@ static const struct { uint8_t val; } rt3070_def_rf[] = { RT3070_DEF_RF +},rt3572_def_rf[] = { + RT3572_DEF_RF }; static const struct usb_config run_config[RUN_N_XFER] = { @@ -502,6 +540,7 @@ run_attach(device_t self) struct usb_attach_arg *uaa = device_get_ivars(self); struct ieee80211com *ic; struct ifnet *ifp; + uint32_t ver; int i, ntries, error; uint8_t iface_index, bands; @@ -513,11 +552,10 @@ run_attach(device_t self) MTX_NETWORK_LOCK, MTX_DEF); iface_index = RT2860_IFACE_INDEX; - /* Rx transfer has own lock */ error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, run_config, RUN_N_XFER, sc, &sc->sc_mtx); if (error) { - device_printf(self, "could not allocate USB Tx transfers, " + device_printf(self, "could not allocate USB transfers, " "err=%s\n", usbd_errstr(error)); goto detach; } @@ -526,11 +564,11 @@ run_attach(device_t self) /* wait for the chip to settle */ for (ntries = 0; ntries < 100; ntries++) { - if (run_read(sc, RT2860_ASIC_VER_ID, &sc->mac_rev) != 0){ + if (run_read(sc, RT2860_ASIC_VER_ID, &ver) != 0){ RUN_UNLOCK(sc); goto detach; } - if (sc->mac_rev != 0 && sc->mac_rev != 0xffffffff) + if (ver != 0 && ver != 0xffffffff) break; run_delay(sc, 10); } @@ -540,13 +578,15 @@ run_attach(device_t self) RUN_UNLOCK(sc); goto detach; } + sc->mac_ver = ver >> 16; + sc->mac_rev = ver & 0xffff; /* retrieve RF rev. no and various other things from EEPROM */ run_read_eeprom(sc); device_printf(sc->sc_dev, "MAC/BBP RT%04X (rev 0x%04X), RF %s (MIMO %dT%dR), address %s\n", - sc->mac_rev >> 16, sc->mac_rev & 0xffff, run_get_rf(sc->rf_rev), + sc->mac_ver, sc->mac_rev, run_get_rf(sc->rf_rev), sc->ntxchains, sc->nrxchains, ether_sprintf(sc->sc_bssid)); if ((error = run_load_microcode(sc)) != 0) { @@ -609,7 +649,9 @@ run_attach(device_t self) * Do this by own because h/w supports * more channels than ieee80211_init_channels() */ - if (sc->rf_rev == RT2860_RF_2750 || sc->rf_rev == RT2860_RF_2850) { + if (sc->rf_rev == RT2860_RF_2750 || + sc->rf_rev == RT2860_RF_2850 || + sc->rf_rev == RT3070_RF_3052) { /* set supported .11a rates */ for (i = 14; i < nitems(rt2860_rf2850); i++) { uint8_t chan = rt2860_rf2850[i].chan; @@ -743,11 +785,15 @@ run_vap_delete(struct ieee80211vap *vap) sc = ifp->if_softc; - if (ifp && ifp->if_flags & IFF_UP){ - RUN_LOCK(sc); - run_stop(sc); - RUN_UNLOCK(sc); - } + RUN_LOCK(sc); + sc->sc_rvp->amrr_run = RUN_AMRR_OFF; + RUN_UNLOCK(sc); + + /* drain them all */ + usb_callout_drain(&sc->sc_rvp->amrr_ch); + ieee80211_draintask(ic, &sc->sc_rvp->amrr_task); + ieee80211_draintask(ic, &sc->wme_task); + ieee80211_draintask(ic, &sc->usb_timeout_task); ieee80211_amrr_cleanup(&rvp->amrr); ieee80211_vap_detach(vap); @@ -808,7 +854,9 @@ run_load_microcode(struct run_softc *sc) const uint64_t *temp; uint64_t bytes; + RUN_UNLOCK(sc); fw = firmware_get("runfw"); + RUN_LOCK(sc); if(fw == NULL){ device_printf(sc->sc_dev, "failed loadfirmware of file %s\n", "runfw"); @@ -829,14 +877,11 @@ run_load_microcode(struct run_softc *sc) * last half is for rt3071. */ base = fw->data; - if ((sc->mac_rev >> 16) != 0x2860 && - (sc->mac_rev >> 16) != 0x2872 && - (sc->mac_rev >> 16) != 0x3070 && - (sc->mac_rev >> 16) != 0x3572){ + if ((sc->mac_ver) != 0x2860 && + (sc->mac_ver) != 0x2872 && + (sc->mac_ver) != 0x3070){ base += 4096; - device_printf(sc->sc_dev, "loading RT3071 firmware\n"); - } else - device_printf(sc->sc_dev, "loading RT2870 firmware\n"); + } /* cheap sanity check */ temp = fw->data; @@ -866,7 +911,7 @@ run_load_microcode(struct run_softc *sc) run_delay(sc, 10); run_write(sc, RT2860_H2M_MAILBOX, 0); - if ((error = run_mcu_cmd(sc, RT2860_MCU_CMD_BOOT, 0)) != 0) + if ((error = run_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0)) != 0) goto fail; /* wait until microcontroller is ready */ @@ -884,7 +929,8 @@ run_load_microcode(struct run_softc *sc) error = ETIMEDOUT; goto fail; } - DPRINTF("microcode successfully loaded after %d tries\n", ntries); + device_printf(sc->sc_dev, "firmware %s loaded\n", + (base == fw->data) ? "RT2870" : "RT3071"); fail: firmware_put(fw, FIRMWARE_UNLOAD); @@ -1283,7 +1329,7 @@ run_read_eeprom(struct run_softc *sc) /* check whether the ROM is eFUSE ROM or EEPROM */ sc->sc_srom_read = run_eeprom_read_2; - if ((sc->mac_rev & 0xfff00000) >= 0x30700000) { + if (sc->mac_ver >= 0x3070) { run_read(sc, RT3070_EFUSE_CTRL, &tmp); DPRINTF("EFUSE_CTRL=0x%08x\n", tmp); if (tmp & RT3070_SEL_EFUSE) @@ -1305,21 +1351,32 @@ run_read_eeprom(struct run_softc *sc) sc->sc_bssid[4] = val & 0xff; sc->sc_bssid[5] = val >> 8; - /* read default BBP settings */ - for (i = 0; i < 8; i++) { + /* read vender BBP settings */ + for (i = 0; i < 10; i++) { run_srom_read(sc, RT2860_EEPROM_BBP_BASE + i, &val); sc->bbp[i].val = val & 0xff; sc->bbp[i].reg = val >> 8; DPRINTF("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val); } + if (sc->mac_ver >= 0x3071) { + /* read vendor RF settings */ + for (i = 0; i < 10; i++) { + run_srom_read(sc, RT3071_EEPROM_RF_BASE + i, &val); + sc->rf[i].val = val & 0xff; + sc->rf[i].reg = val >> 8; + DPRINTF("RF%d=0x%02x\n", sc->rf[i].reg, + sc->rf[i].val); + } + } /* read RF frequency offset from EEPROM */ run_srom_read(sc, RT2860_EEPROM_FREQ_LEDS, &val); sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; DPRINTF("EEPROM freq offset %d\n", sc->freq & 0xff); - if ((sc->leds = val >> 8) != 0xff) { + if (val >> 8 != 0xff) { /* read LEDs operating mode */ + sc->leds = val >> 8; run_srom_read(sc, RT2860_EEPROM_LED1, &sc->led[0]); run_srom_read(sc, RT2860_EEPROM_LED2, &sc->led[1]); run_srom_read(sc, RT2860_EEPROM_LED3, &sc->led[2]); @@ -1337,7 +1394,12 @@ run_read_eeprom(struct run_softc *sc) run_srom_read(sc, RT2860_EEPROM_ANTENNA, &val); if (val == 0xffff) { DPRINTF("invalid EEPROM antenna info, using default\n"); - if ((sc->mac_rev >> 16) >= 0x3070) { + if (sc->mac_ver == 0x3572) { + /* default to RF3052 2T2R */ + sc->rf_rev = RT3070_RF_3052; + sc->ntxchains = 2; + sc->nrxchains = 2; + } else if (sc->mac_ver >= 0x3070) { /* default to RF3020 1T1R */ sc->rf_rev = RT3070_RF_3020; sc->ntxchains = 1; @@ -1356,13 +1418,18 @@ run_read_eeprom(struct run_softc *sc) DPRINTF("EEPROM RF rev=0x%02x chains=%dT%dR\n", sc->rf_rev, sc->ntxchains, sc->nrxchains); - /* check if RF supports automatic Tx access gain control */ run_srom_read(sc, RT2860_EEPROM_CONFIG, &val); DPRINTF("EEPROM CFG 0x%04x\n", val); + /* check if driver should patch the DAC issue */ + if ((val >> 8) != 0xff) + sc->patch_dac = (val >> 15) & 1; if ((val & 0xff) != 0xff) { sc->ext_5ghz_lna = (val >> 3) & 1; sc->ext_2ghz_lna = (val >> 2) & 1; + /* check if RF supports automatic Tx access gain control */ sc->calib_2ghz = sc->calib_5ghz = (val >> 1) & 1; + /* check if we have a hardware radio switch */ + sc->rfswitch = val & 1; } /* read power settings for 2GHz channels */ @@ -1385,7 +1452,7 @@ run_read_eeprom(struct run_softc *sc) rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]); } /* read power settings for 5GHz channels */ - for (i = 0; i < 36; i += 2) { + for (i = 0; i < 40; i += 2) { run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2, &val); sc->txpow1[i + 14] = (int8_t)(val & 0xff); sc->txpow1[i + 15] = (int8_t)(val >> 8); @@ -1395,7 +1462,7 @@ run_read_eeprom(struct run_softc *sc) sc->txpow2[i + 15] = (int8_t)(val >> 8); } /* fix broken Tx power entries */ - for (i = 0; i < 36; i++) { + for (i = 0; i < 40; i++) { if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) sc->txpow1[14 + i] = 5; if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) @@ -1444,14 +1511,32 @@ run_read_eeprom(struct run_softc *sc) sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ sc->rssi_2ghz[1] = val >> 8; /* Ant B */ run_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ, &val); - sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ + if (sc->mac_ver >= 0x3070) { + /* + * On RT3070 chips (limited to 2 Rx chains), this ROM + * field contains the Tx mixer gain for the 2GHz band. + */ + if ((val & 0xff) != 0xff) + sc->txmixgain_2ghz = val & 0x7; + DPRINTF("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz); + } else + sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ sc->lna[2] = val >> 8; /* channel group 2 */ run_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ, &val); sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ sc->rssi_5ghz[1] = val >> 8; /* Ant B */ run_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ, &val); - sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ + if (sc->mac_ver == 0x3572) { + /* + * On RT3572 chips (limited to 2 Rx chains), this ROM + * field contains the Tx mixer gain for the 5GHz band. + */ + if ((val & 0xff) != 0xff) + sc->txmixgain_5ghz = val & 0x7; + DPRINTF("tx mixer gain=%u (5GHz)\n", sc->txmixgain_5ghz); + } else + sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ sc->lna[3] = val >> 8; /* channel group 3 */ run_srom_read(sc, RT2860_EEPROM_LNA, &val); @@ -2639,7 +2724,7 @@ run_tx(struct run_softc *sc, struct mbuf dur = rt2860_rates[ridx].sp_ack_dur; else dur = rt2860_rates[ridx].lp_ack_dur; - *(uint16_t *)wh->i_dur = htole16(dur + sc->sifs); + *(uint16_t *)wh->i_dur = htole16(dur); } /* reserve slots for mgmt packets, just in case */ @@ -3006,9 +3091,26 @@ run_ioctl(struct ifnet *ifp, u_long cmd, } static void +run_set_agc(struct run_softc *sc, uint8_t agc) +{ + uint8_t bbp; + + if (sc->mac_ver == 0x3572) { + run_bbp_read(sc, 27, &bbp); + bbp &= ~(0x3 << 5); + run_bbp_write(sc, 27, bbp | 0 << 5); /* select Rx0 */ + run_bbp_write(sc, 66, agc); + run_bbp_write(sc, 27, bbp | 1 << 5); /* select Rx1 */ + run_bbp_write(sc, 66, agc); + } else + run_bbp_write(sc, 66, agc); +} + +static void run_select_chan_group(struct run_softc *sc, int group) { uint32_t tmp; + uint8_t agc; run_bbp_write(sc, 62, 0x37 - sc->lna[group]); run_bbp_write(sc, 63, 0x37 - sc->lna[group]); @@ -3024,13 +3126,14 @@ run_select_chan_group(struct run_softc * run_bbp_write(sc, 75, 0x50); } } else { - if (sc->ext_5ghz_lna) { + if (sc->mac_ver == 0x3572) + run_bbp_write(sc, 82, 0x94); + else run_bbp_write(sc, 82, 0xf2); + if (sc->ext_5ghz_lna) run_bbp_write(sc, 75, 0x46); - } else { - run_bbp_write(sc, 82, 0xf2); + else run_bbp_write(sc, 75, 0x50); - } } run_read(sc, RT2860_TX_BAND_CFG, &tmp); @@ -3053,13 +3156,26 @@ run_select_chan_group(struct run_softc * if (sc->nrxchains > 1) tmp |= RT2860_LNA_PE_A1_EN; } - run_write(sc, RT2860_TX_PIN_CFG, tmp); + if (sc->mac_ver == 0x3572) { + run_rt3070_rf_write(sc, 8, 0x00); + run_write(sc, RT2860_TX_PIN_CFG, tmp); + run_rt3070_rf_write(sc, 8, 0x80); + } else + run_write(sc, RT2860_TX_PIN_CFG, tmp); /* set initial AGC value */ - if (group == 0) - run_bbp_write(sc, 66, 0x2e + sc->lna[0]); - else - run_bbp_write(sc, 66, 0x32 + (sc->lna[group] * 5) / 3); + if (group == 0) { /* 2GHz band */ + if (sc->mac_ver >= 0x3070) + agc = 0x1c + sc->lna[0] * 2; + else + agc = 0x2e + sc->lna[0]; + } else { /* 5GHz band */ + if (sc->mac_ver == 0x3572) + agc = 0x22 + (sc->lna[group] * 5) / 3; + else + agc = 0x32 + (sc->lna[group] * 5) / 3; + } + run_set_agc(sc, agc); } static void @@ -3122,18 +3238,22 @@ run_rt3070_set_chan(struct run_softc *sc { int8_t txpow1, txpow2; uint8_t rf; + int i; /* RT3070 is 2GHz only */ KASSERT(chan >= 1 && chan <= 14, ("wrong channel selected\n")); + /* find the settings for this channel (we know it exists) */ + for (i = 0; rt2860_rf2850[i].chan != chan; i++); + /* use Tx power values from EEPROM */ - txpow1 = sc->txpow1[chan - 1]; - txpow2 = sc->txpow2[chan - 1]; + txpow1 = sc->txpow1[i]; + txpow2 = sc->txpow2[i]; - run_rt3070_rf_write(sc, 2, run_rf3020_freqs[chan - 1].n); - run_rt3070_rf_write(sc, 3, run_rf3020_freqs[chan - 1].k); + run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); + run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); run_rt3070_rf_read(sc, 6, &rf); - rf = (rf & ~0x03) | run_rf3020_freqs[chan - 1].r; + rf = (rf & ~0x03) | rt3070_freqs[i].r; run_rt3070_rf_write(sc, 6, rf); /* set Tx0 power */ @@ -3164,12 +3284,166 @@ run_rt3070_set_chan(struct run_softc *sc run_rt3070_rf_write(sc, 23, rf); /* program RF filter */ - run_rt3070_rf_write(sc, 24, sc->rf24_20mhz); - run_rt3070_rf_write(sc, 31, sc->rf24_20mhz); + run_rt3070_rf_read(sc, 24, &rf); /* Tx */ + rf = (rf & ~0x3f) | sc->rf24_20mhz; + run_rt3070_rf_write(sc, 24, rf); + run_rt3070_rf_read(sc, 31, &rf); /* Rx */ + rf = (rf & ~0x3f) | sc->rf24_20mhz; + run_rt3070_rf_write(sc, 31, rf); + + /* enable RF tuning */ + run_rt3070_rf_read(sc, 7, &rf); + run_rt3070_rf_write(sc, 7, rf | 0x01); +} + +static void +run_rt3572_set_chan(struct run_softc *sc, u_int chan) +{ + int8_t txpow1, txpow2; + uint32_t tmp; + uint8_t rf; + int i; + + /* find the settings for this channel (we know it exists) */ + for (i = 0; rt2860_rf2850[i].chan != chan; i++); + + /* use Tx power values from EEPROM */ + txpow1 = sc->txpow1[i]; + txpow2 = sc->txpow2[i]; + + if (chan <= 14) { + run_bbp_write(sc, 25, sc->bbp25); + run_bbp_write(sc, 26, sc->bbp26); + } else { + /* enable IQ phase correction */ + run_bbp_write(sc, 25, 0x09); + run_bbp_write(sc, 26, 0xff); + } + + run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); + run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); + run_rt3070_rf_read(sc, 6, &rf); + rf = (rf & ~0x0f) | rt3070_freqs[i].r; + rf |= (chan <= 14) ? 0x08 : 0x04; + run_rt3070_rf_write(sc, 6, rf); + + /* set PLL mode */ + run_rt3070_rf_read(sc, 5, &rf); + rf &= ~(0x08 | 0x04); + rf |= (chan <= 14) ? 0x04 : 0x08; + run_rt3070_rf_write(sc, 5, rf); + + /* set Tx power for chain 0 */ + if (chan <= 14) + rf = 0x60 | txpow1; + else + rf = 0xe0 | (txpow1 & 0xc) << 1 | (txpow1 & 0x3); + run_rt3070_rf_write(sc, 12, rf); + + /* set Tx power for chain 1 */ + if (chan <= 14) + rf = 0x60 | txpow2; + else + rf = 0xe0 | (txpow2 & 0xc) << 1 | (txpow2 & 0x3); + run_rt3070_rf_write(sc, 13, rf); + + /* set Tx/Rx streams */ + run_rt3070_rf_read(sc, 1, &rf); + rf &= ~0xfc; + if (sc->ntxchains == 1) + rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ + else if (sc->ntxchains == 2) + rf |= 1 << 7; /* 2T: disable Tx chain 3 */ + if (sc->nrxchains == 1) + rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ + else if (sc->nrxchains == 2) + rf |= 1 << 6; /* 2R: disable Rx chain 3 */ + run_rt3070_rf_write(sc, 1, rf); + + /* set RF offset */ + run_rt3070_rf_read(sc, 23, &rf); + rf = (rf & ~0x7f) | sc->freq; + run_rt3070_rf_write(sc, 23, rf); + + /* program RF filter */ + rf = sc->rf24_20mhz; + run_rt3070_rf_write(sc, 24, rf); /* Tx */ + run_rt3070_rf_write(sc, 31, rf); /* Rx */ + + /* enable RF tuning */ + run_rt3070_rf_read(sc, 7, &rf); + rf = (chan <= 14) ? 0xd8 : ((rf & ~0xc8) | 0x14); + run_rt3070_rf_write(sc, 7, rf); + + /* TSSI */ + rf = (chan <= 14) ? 0xc3 : 0xc0; + run_rt3070_rf_write(sc, 9, rf); + + /* set loop filter 1 */ + run_rt3070_rf_write(sc, 10, 0xf1); + /* set loop filter 2 */ + run_rt3070_rf_write(sc, 11, (chan <= 14) ? 0xb9 : 0x00); + + /* set tx_mx2_ic */ + run_rt3070_rf_write(sc, 15, (chan <= 14) ? 0x53 : 0x43); + /* set tx_mx1_ic */ + if (chan <= 14) + rf = 0x48 | sc->txmixgain_2ghz; + else + rf = 0x78 | sc->txmixgain_5ghz; + run_rt3070_rf_write(sc, 16, rf); + + /* set tx_lo1 */ + run_rt3070_rf_write(sc, 17, 0x23); + /* set tx_lo2 */ + if (chan <= 14) + rf = 0x93; + else if (chan <= 64) + rf = 0xb7; + else if (chan <= 128) + rf = 0x74; + else + rf = 0x72; + run_rt3070_rf_write(sc, 19, rf); + + /* set rx_lo1 */ + if (chan <= 14) + rf = 0xb3; + else if (chan <= 64) + rf = 0xf6; + else if (chan <= 128) + rf = 0xf4; + else + rf = 0xf3; + run_rt3070_rf_write(sc, 20, rf); + + /* set pfd_delay */ + if (chan <= 14) + rf = 0x15; + else if (chan <= 64) + rf = 0x3d; + else + rf = 0x01; + run_rt3070_rf_write(sc, 25, rf); + + /* set rx_lo2 */ + run_rt3070_rf_write(sc, 26, (chan <= 14) ? 0x85 : 0x87); + /* set ldo_rf_vc */ + run_rt3070_rf_write(sc, 27, (chan <= 14) ? 0x00 : 0x01); + /* set drv_cc */ + run_rt3070_rf_write(sc, 29, (chan <= 14) ? 0x9b : 0x9f); + + run_read(sc, RT2860_GPIO_CTRL, &tmp); + tmp &= ~0x8080; + if (chan <= 14) + tmp |= 0x80; + run_write(sc, RT2860_GPIO_CTRL, tmp); /* enable RF tuning */ run_rt3070_rf_read(sc, 7, &rf); run_rt3070_rf_write(sc, 7, rf | 0x01); + + run_delay(sc, 2); } static void @@ -3178,13 +3452,11 @@ run_set_rx_antenna(struct run_softc *sc, uint32_t tmp; if (aux) { - run_read(sc, RT2860_PCI_EECTRL, &tmp); - run_write(sc, RT2860_PCI_EECTRL, tmp & ~RT2860_C); + run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 0); run_read(sc, RT2860_GPIO_CTRL, &tmp); run_write(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08); } else { - run_read(sc, RT2860_PCI_EECTRL, &tmp); - run_write(sc, RT2860_PCI_EECTRL, tmp | RT2860_C); + run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 1); run_read(sc, RT2860_GPIO_CTRL, &tmp); run_write(sc, RT2860_GPIO_CTRL, tmp & ~0x0808); } @@ -3200,14 +3472,13 @@ run_set_chan(struct run_softc *sc, struc if (chan == 0 || chan == IEEE80211_CHAN_ANY) return EINVAL; - if ((sc->mac_rev >> 16) >= 0x3070) + if (sc->mac_ver == 0x3572) + run_rt3572_set_chan(sc, chan); + else if (sc->mac_ver >= 0x3070) run_rt3070_set_chan(sc, chan); else run_rt2870_set_chan(sc, chan); - /* 802.11a uses a 16 microseconds short interframe space */ - sc->sifs = IEEE80211_IS_CHAN_5GHZ(c) ? 16 : 10; - /* determine channel group */ if (chan <= 14) group = 0; @@ -3373,7 +3644,7 @@ run_usb_timeout_cb(void *arg, int pendin struct run_softc *sc = arg; struct ieee80211vap *vap = &sc->sc_rvp->vap; - RUN_LOCK_ASSERT(sc, MA_OWNED); + RUN_LOCK(sc); if(vap->iv_state == IEEE80211_S_RUN && vap->iv_opmode != IEEE80211_M_STA) @@ -3384,6 +3655,8 @@ run_usb_timeout_cb(void *arg, int pendin ieee80211_cancel_scan(vap); } else DPRINTF("timeout by unknown cause\n"); + + RUN_UNLOCK(sc); *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201003112205.o2BM5C56079446>