Date: Fri, 25 Jun 1999 00:33:19 -0400 (EDT) From: Mikhail Teterin <mi@aldan.algebra.com> To: questions@freebsd.org Subject: PCI sound board, apm on a dual PII Message-ID: <199906250433.AAA20329@guest.newton>
next in thread | raw e-mail | index | archive | help
--ELM930285199-17779-0_
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Hello!
I have questions about the machine I'm setting up. First is the power
management. When the machine boots, there is a line:
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.18.3
Unfortunately, it is soon followed by the: ``apm0 not found''.
Another question relates to this strange looking sound card/modem
combination I pulled out of another machine (where it worked under
Win98). It consists of two separate PCI boards, one being a sound card
(Ensoniq) with two inputs for two CD-ROM audios and third cable going
into the other card that is a modem.
No new serial ports or anything appeared when I put this cards in... Do
I stand a chance of using the modem at all? What about utilizing its
connection to the sound card?
No ISA cards are in a machine.
Full dmesg output is attached.
Thanks for any suggestions,
-mi
--ELM930285199-17779-0_
Content-Type: text/plain; charset=KOI8-R
Content-Disposition: attachment; filename=dmesg.boot
Content-Description: dmesg.boot
Content-Transfer-Encoding: 7bit
ncr 53c875 fast20 wide scsi> rev 0x37 int b irq 22 on pci0.13.1
ncr1: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo
ncr1: single-ended, open drain IRQ driver, using on-chip SRAM
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1274, dev=0x1371, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=18
map[0]: type 4, range 32, base 0000fc40, size 6
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=20
map[0]: type 3, range 32, base fedfb000, size 12
map[1]: type 4, range 32, base 0000fce0, size 5
map[2]: type 1, range 32, base feb00000, size 20
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 20 on pci0.15.0
fxp0: Ethernet address 00:a0:c9:83:0b:d5
bpf: fxp0 attached
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.18.0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000fcb0, size 4
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=22
map[0]: type 4, range 32, base 0000fcc0, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.18.3
found-> vendor=0x1013, dev=0x00bc, revid=0x23
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 3, range 32, base fa000000, size 25
map[1]: type 1, range 32, base fedfc000, size 12
vga1: <Cirrus Logic model 00bc VGA-compatible display device> rev 0x23 on pci0.20.0
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 00 00 28
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: irq maps: 0x1 0x1 0x1 0x1
sio2: probe failed test(s): 0 1 2 4 6 7 9
sio2 not found at 0x3e8
sio3: configured irq 9 not in bitmap of probed irqs 0
sio3: irq maps: 0x1 0x1 0x1 0x1
sio3: probe failed test(s): 0 1 2 4 6 7 9
sio3 not found at 0x2e8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (atapi): <CRD-8240B/1.12>, removable, accel, dma, iordis
acd0: drive speed 171 - 4125KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked, lock protected
ppc: parallel port found at 0x378
ppc: chipset forced to generic
ppc0: ECP SPP SPP
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: can't connect to the drive
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 6f 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 6f 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
npx0 on motherboard
npx0: INT 16 interface
apm0 not found
imasks: bio c8008040, tty c300101a, net c6100080
SMP: enabled INTs: 1, 3, 4, 6, 7, 12, 15, 20, 21, 22, apic_imen: 0x008f6f25
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
bpf: tun0 attached
bpf: tun1 attached
bpf: tun2 attached
bpf: tun3 attached
bpf: tun4 attached
bpf: tun5 attached
bpf: tun6 attached
bpf: tun7 attached
bpf: lo0 attached
Waiting 5 seconds for SCSI devices to settle
ncr0: restart (scsi reset).
ncr1: restart (scsi reset).
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
(probe16:ncr1:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe16:ncr1:0:1:0): ILLEGAL REQUEST asc:24,0
(probe16:ncr1:0:1:0): Invalid field in CDB
pass0 at ncr0 bus 0 target 3 lun 0
pass0: <SEAGATE ST34371W 0440> Fixed Direct Access SCSI-2 device
pass0: Serial Number JDD591830LZS1M
pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
pass1 at ncr1 bus 0 target 1 lun 0
pass1: <NEC CD-ROM DRIVE:500 2.5> Removable CD-ROM SCSI-2 device
pass1: 3.300MB/s transfers
da0 at ncr0 bus 0 target 3 lun 0
da0: <SEAGATE ST34371W 0440> Fixed Direct Access SCSI-2 device
da0: Serial Number JDD591830LZS1M
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C)
Considering FFS root f/s.
changing root device to da0s1a
da0s1: type 0xa5, start 0, end = 8496883, size 8496884
da0s1: C/H/S end 528/231/11 (1350007) != end 8496883: invalid
(cd0:ncr1:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ncr1:0:1:0): NOT READY asc:3a,0
(cd0:ncr1:0:1:0): Medium not present
cd0 at ncr1 bus 0 target 1 lun 0
cd0: <NEC CD-ROM DRIVE:500 2.5> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
start_init: trying /sbin/init
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
--ELM930285199-17779-0_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199906250433.AAA20329>