Date: Mon, 29 Dec 2003 09:49:34 +0800 From: Jamie Clark <jclark@metaparadigm.com> To: current@freebsd.org Subject: Re: SATA disks on 5.2-CURRENT Message-ID: <3FEF882E.6080800@metaparadigm.com> In-Reply-To: <86u14cwqrf.wl@bougainvillea.FromTo.Cc> References: <86u14cwqrf.wl@bougainvillea.FromTo.Cc>
next in thread | previous in thread | raw e-mail | index | archive | help
Tatsumi Hosokawa wrote: >atapci2@pci0:31:2: class=0x01018f card=0x24d11458 chip=0x24d18086 rev=0x02 >hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB (ICH5) SATA Controller' > class = mass storage > subclass = ATA > >Disks sometimes work, and sometimes don't work, and sometimes the >system hangs in boot process (these disks work fine on 4.9-RELEASE). > > FWIW (if a 'me too' is worth anything) I have exactly the same problem with my Intel 865PERL mainboard. Same error messages as below, almost always hangs on boot. Last tested with -CURRENT around 26 Dec. My reason for using the SATA channels was because I had already fully populated PATA - so using legacy mode was not an option. The SATA did work ok in Windows. Solution was found in a 3ware controller. I'd be happy to re-connect and collect some further verbose messages if anyone's interested. -Jamie >Error messages: > > Case 1: > Dec 7 21:52:02 nekodaisuki kernel: ad4: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=40<UNCORRECTABLE> > Dec 7 21:52:02 nekodaisuki kernel: ad6: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> > > Case 2: > Dec 8 00:27:48 nekodaisuki kernel: ad4: WARNING - READ_DMA recovered from missing interrupt > Dec 8 00:27:48 nekodaisuki kernel: ad4: FAILURE - READ_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 > Dec 8 00:27:48 nekodaisuki kernel: ad4: timeout sending command=c8 > Dec 8 00:27:48 nekodaisuki kernel: ad4: error issuing DMA command > Dec 8 00:27:48 nekodaisuki kernel: ad4: WARNING - READ_DMA recovered from missing interrupt > Dec 8 00:27:48 nekodaisuki kernel: ad4: FAILURE - READ_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FEF882E.6080800>