Date: 30 May 2003 19:03:29 +0200 From: arno@heho.snv.jussieu.fr To: freebsd-current@freebsd.org Subject: strange 'su' problem Message-ID: <wp65nsxt7i.fsf@heho.snv.jussieu.fr>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
just another, "/me too" : -current still works like a charm
on my Toshiba Notebook, but for two details :
- I regot those:
"psmintr: out of sync (0080 != 0000).
psmintr: re-enable the mouse"
since today's upgrade but they seem to be harmless (this time ^_^)
- I still have:
"M ~/tmp [16096] > su - toor
[1]+ Stopped su - toor
M ~/tmp [16097] > fg
su - toor
-su-2.05b#
"M ~/tmp [16081] > su - root
[1]+ Stopped su - root
M ~/tmp [16082] > fg
su - root
M#
I use bash as my login-shell.
Regards, Arno
[-- Attachment #2 --]
FreeBSD M 5.1-BETA FreeBSD 5.1-BETA #0: Fri May 30 17:49:41 CEST 2003 toor@M:/usr/obj/usr/src/sys/Sat-current i386
[-- Attachment #3 --]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #0: Fri May 30 17:49:41 CEST 2003
toor@M:/usr/obj/usr/src/sys/Sat-current
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0572000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05722bc.
Calibrating clock(s) ... i8254 clock: 1197954 Hz
Timecounter "i8254" frequency 1197954 Hz
Calibrating TSC clock ... TSC clock: 999945556 Hz
Timecounter "TSC" frequency 999945556 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (999.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 653656064 (623 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000599000 - 0x0000000026443fff, 636137472 bytes (155307 pages)
avail memory = 628989952 (599 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f00b0
bios32: Entry = 0xf98e9 (c00f98e9) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x97ab
pnpbios: Found PnP BIOS data at 0xc00f0260
pnpbios: Entry = f0000:8d8 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c936f351
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
tap0: bpf attached
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000084
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=164410b9)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f01d0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 2 A 0x59 11
embedded 0 6 A 0x08 11
embedded 0 17 A 0x01 11
embedded 0 17 B 0x02 11
embedded 0 10 A 0x04 11
embedded 1 0 A 0x03 11
embedded 0 16 A 0x03 11
embedded 0 16 B 0x04 11
embedded 0 18 A 0x01 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 3, max = 7, width = 4
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 3, max = 8, width = 5
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.FNC0.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.17.0
\\_SB_.PCI0.FNC0.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.17.1
\\_SB_.PCI0.FNC0.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.10.0
\\_SB_.PCI0.FNC0.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.16.0
\\_SB_.PCI0.FNC0.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.16.1
\\_SB_.PCI0.FNC0.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.6.0
\\_SB_.PCI0.FNC0.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.FNC0.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.2.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.FNC0.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.17.0
\\_SB_.PCI0.FNC0.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.17.1
\\_SB_.PCI0.FNC0.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.10.0
\\_SB_.PCI0.FNC0.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.16.0
\\_SB_.PCI0.FNC0.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.16.1
\\_SB_.PCI0.FNC0.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.6.0
\\_SB_.PCI0.FNC0.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.FNC0.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.2.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f0000000, size 26, enabled
found-> vendor=0x10b9, dev=0x1644, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0xa210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x5247, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f7eff000, size 12, enabled
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000eff0, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc3
bus=0, slot=4, func=0
class=01-01-f0, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ed00, size 8, enabled
map[14]: type 1, range 32, base f7efe000, size 12, enabled
found-> vendor=0x10b9, dev=0x5451, revid=0x01
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0xc290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=8, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f7efd000, size 12, enabled
map[14]: type 4, range 32, base 0000eb40, size 6, enabled
map[18]: type 1, range 32, base f7ec0000, size 17, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x0d
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1179, dev=0x0617, revid=0x32
bus=0, slot=17, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D3 current D0
found-> vendor=0x1179, dev=0x0617, revid=0x32
bus=0, slot=17, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base f7ebfe00, size 9, enabled
found-> vendor=0x1179, dev=0x0805, revid=0x03
bus=0, slot=18, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf7f00000-0xfdffffff
pcib1: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.PCI0.FNC0.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.FNC0.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fc000000, size 25, enabled
map[14]: type 1, range 32, base fbc00000, size 22, enabled
map[18]: type 1, range 32, base f8000000, size 25, enabled
map[1c]: type 1, range 32, base f7ff8000, size 15, enabled
found-> vendor=0x1023, dev=0x8820, revid=0x82
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xeff0-0xefff at device 4.0 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at device 6.0 on pci0
pcm0: <Asahi Kasei AK4543 AC97 Codec (id = 0x414b4d02)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio
pcm0: sndbuf_setmap 781000, 1000; 0xc4bed000 -> 781000
pcm0: sndbuf_setmap 79e000, 1000; 0xc4bea000 -> 79e000
pcm0: sndbuf_setmap 76d000, 1000; 0xc4bf9000 -> 76d000
pcm0: sndbuf_setmap 76a000, 1000; 0xc4c16000 -> 76a000
pcm0: sndbuf_setmap 7a8000, 1000; 0xc4c14000 -> 7a8000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xeb40-0xeb7f mem 0xf7ec0000-0xf7edffff,0xf7efd000-0xf7efdfff irq 11 at device 10.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:00:39:bd:7b:b1
fxp0: PCI IDs: 8086 1229 1179 0001 000d
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.17.INTA (source \\_SB_.PCI0.FNC0.LNKA)
pcib0: slot 17 INTA is routed to irq 11
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 17.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.17.INTB (source \\_SB_.PCI0.FNC0.LNKB)
pcib0: slot 17 INTB is routed to irq 11
pci0: <base peripheral> at device 18.0 (no driver attached)
unknown: not probed (disabled)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
linprocfs registered
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
Linux ELF exec handler installed
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: success setting UDMA66 on AcerLabs Aladdin chip
ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on AcerLabs Aladdin chip
acd0: <UJDA720 DVD/CDRW/1.00> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 344KB/s (344KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-RW 120mm photo disc
[0] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:16322040 l:22748040
[1] f:80 typ:23 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:16321977
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 8356884480 length 11646996480 end 20003880959
GEOM: Configure ad0s2, start 32256 length 8356852224 end 8356884479
GEOM: Configure ad0s1a, start 0 length 262144000 end 262143999
GEOM: Configure ad0s1b, start 524288000 length 536870912 end 1061158911
GEOM: Configure ad0s1c, start 0 length 11646996480 end 11646996479
GEOM: Configure ad0s1d, start 262144000 length 262144000 end 524287999
GEOM: Configure ad0s1e, start 1061158912 length 10585837568 end 11646996479
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA720 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [196834 x 2048 byte records]
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 81615 free (415 frags, 10150 blocks, 0.3% fragmentation)
/dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 778908 free (83884 frags, 86878 blocks, 1.6% fragmentation)
/dev/ad0s1d: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 113040 free (384 frags, 14082 blocks, 0.3% fragmentation)
Setting hostname: M.
module_register: module if_tap already exists!
Module if_tap failed to register: 17
can't re-use a leaf (if_tap_debug)!
tap0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:90:27:3f:12:9f
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
inet 192.168.38.38 netmask 0xffffffff
Additional routing options:
.
hw.bus.devctl_disable:
0
->
1
Mounting NFS file systems:
.
Starting syslogd.
May 30 18:15:12 M syslogd: kernel boot file is /boot/kernel/kernel
Starting named.
Starting rpcbind.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
NFS access cache time=2
Starting usbd.
Starting apm.
Starting apm.
Starting apmd.
Starting local daemons:
GEOM: Configure md0c, start 0 length 268435456 end 268435455
/dev/md0c: 256.0MB (524288 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 64.02MB, 4097 blks, 16448 inodes.
super-block backups (for fsck -b #) at:
160,
131264,
262368,
393472
GEOM: Reconfigure md0c, start 0 length 268435456 end 268435455
.
Updating motd.
Configuring syscons:
keymap
keyrate
blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
FlexLM
Checking license file for local hostname and local hostid . . .
Taking down any existing license manager daemons . . .
No license manager daemons running . . .
Starting license manager . . .
Debug logfile = /var/tmp/lm_TMW.log
Starting demo Scito License Manager...
Demo Scito License Manager started.
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Fri May 30 18:15:25 CEST 2003
psmintr: out of sync (0040 != 0000).
psmintr: discard a byte (1).
psmintr: out of sync (0080 != 0000).
psmintr: discard a byte (2).
psmintr: out of sync (0080 != 0000).
psmintr: re-enable the mouse.
May 30 18:15:44 M kernel: psmintr: out of sync (0040 != 0000).
May 30 18:15:45 M kernel: psmintr: discard a byte (1).
May 30 18:15:45 M kernel: psmintr: out of sync (0080 != 0000).
May 30 18:15:45 M kernel: psmintr: discard a byte (2).
May 30 18:15:45 M kernel: psmintr: out of sync (0080 != 0000).
May 30 18:15:45 M kernel: psmintr: re-enable the mouse.
psmintr: out of sync (0040 != 0000).
psmintr: discard a byte (4).
May 30 18:15:45 M kernel: psmintr: out of sync (0040 != 0000).
May 30 18:15:45 M kernel: psmintr: discard a byte (4).
acpi_cmbat1: battery initialization failed, giving up
[-- Attachment #4 --]
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.380 2003/03/29 13:36:41 mdodd Exp $
machine i386
#AK cpu I486_CPU
#AK cpu I586_CPU
cpu I686_CPU
ident Sat-current
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
options DDB #Enable the kernel debugger
#t options INVARIANTS #Enable calls of extra sanity checking
#t options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
#t options WITNESS #Enable checks to detect deadlocks and cycles
#t options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
#AK device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#AK device ahb # EISA AHA1742 family
#AK device ahc # AHA2940 and onboard AIC7xxx devices
#AK device ahd # AHA39320/29320 and onboard AIC79xx devices
#AK device amd # AMD 53C974 (Tekram DC-390(T))
#AK device isp # Qlogic family
#AK device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#AK device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#AK device trm # Tekram DC395U/UW/F DC315U adapters
#AK device adv # Advansys SCSI adapters
#AK device adw # Advansys wide SCSI adapters
#AK device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#AK device bt # Buslogic/Mylex MultiMaster SCSI adapters
#AK device ncv # NCR 53C500
#AK device nsp # Workbit Ninja SCSI-3
#AK device stg # TMC 18C30/18C50
# RAID controllers interfaced to the SCSI subsystem
#AK device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#AK device ciss # Compaq Smart RAID 5*
#AK device dpt # DPT Smartcache III, IV - See NOTES for options!
#AK device iir # Intel Integrated RAID
#AK device mly # Mylex AcceleRAID/eXtremeRAID
# SCSI peripherals
device scbus # SCSI bus (required)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers
#AK device aac # Adaptec FSA RAID
#AK device aacp # SCSI passthrough for aac (requires CAM)
#AK device amr # AMI MegaRAID
#AK device ida # Compaq Smart RAID
#AK device mlx # Mylex DAC960 family
#AK device pst # Promise Supertrak SX6000
#AK device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#AK device de # DEC/Intel DC21x4x (``Tulip'')
#AK device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#AK device txp # 3Com 3cR990 (``Typhoon'')
#AK device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#AK device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#AK device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#AK device rl # RealTek 8129/8139
#AK device sf # Adaptec AIC-6915 (``Starfire'')
#AK device sis # Silicon Integrated Systems SiS 900/SiS 7016
#AK device ste # Sundance ST201 (D-Link DFE-550TX)
#AK device tl # Texas Instruments ThunderLAN
#AK device tx # SMC EtherPower II (83c170 ``EPIC'')
#AK device vr # VIA Rhine, Rhine II
#AK device wb # Winbond W89C840F
#AK device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#AK device bge # Broadcom BCM570xx Gigabit Ethernet
# ISA Ethernet NICs. pccard nics included.
#AK device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#AK device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#AK device ex # Intel EtherExpress Pro/10 and Pro/10+
#AK device ep # Etherlink III based cards
#AK device fe # Fujitsu MB8696x based cards
#AK device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#AK device lnc # NE2100, NE32-VL Lance Ethernet cards
#AK device sn # SMC's 9000 series of ethernet chips
#AK device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#AK device wlan # 802.11 support
#AK device an # Aironet 4500/4800 802.11 wireless NICs.
#AK device awi # BayStack 660 and others
#AK device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#AK #device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
#AK device sl # Kernel SLIP
#AK device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
#AK device aue # ADMtek USB ethernet
#AK device cue # CATC USB ethernet
#AK device kue # Kawasaki LSI USB ethernet
#_Arno_extensions
device pcm
device atapicam
device tap
options COMPAT_LINUX
options LINPROCFS
options DEVICE_POLLING
options HZ=1000
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
# options MAXDSIZ="(512*1024*1024)"
# options DFLDSIZ="(512*1024*1024)"
# options MAXSSIZ="(128*1024*1024)"
options RANDOM_IP_ID
options TCP_DROP_SYNFIN
options CPU_FASTER_5X86_FPU
# options PCI_ENABLE_IO_MODES
#
# options VESA
# options SC_DISABLE_REBOOT
# options SC_HISTORY_SIZE=500
# options SC_NO_SUSPEND_VTYSWITCH
# options SC_NO_HISTORY
# options SC_NO_CUTPASTE
# options SC_NO_SYSMOUSE
# options SC_NO_FONT_LOADING
# options SC_NO_PALETTE_LOADING
# options KBDIO_DEBUG=2
# options KBD_MAXRETRY=4
# options KBD_MAXWAIT=6
# options KBD_RESETDELAY=201
# options PSM_DEBUG=1
# options MAXCONS=4 # number of virtual consoles
# options MSGBUF_SIZE=163840
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wp65nsxt7i.fsf>