Date: Mon, 10 Nov 1997 12:50:02 -0800 (PST) From: "Bryn Wm. Moslow" <bryn@nwlink.com> To: freebsd-isp@freebsd.org Subject: Adaptec problems? Message-ID: <Pine.GSO.3.95.971110123347.28283K-100000@utah>
next in thread | raw e-mail | index | archive | help
Hello, I'm wondering if anyone has seen this kind of thing. When I finally
got logged on to the box (took about 5 minutes to get a shell login and
about 5 min for commands to run) I found several (20 or so) instances of
inetd running and >100 sendmail processes running with a load of 8+. The
only consistent error seems to be with SCSI when I've seen this. I *am*
using tagged command queuing (AHC_TAGENABLE) and may stop. I've included
quite a bit of reading, sorry about that, but I'm concerned about the
stability of the SCSI system (Adaptec 2940UW). One thing that really
disturbs me is the 'file system full' messages as the disk in error is
only at 2%-4% full when this has happened.
FreeBSD 2.2.2-RELEASE
sendmail 8.8.8
qpopper
/\ /\ /| Bryn Wm. Moslow
/ \ / \ / | Senior Systems Administrator
/ \ / \ / | Northwest Link
/ \ / \ /\ / | (425) 451-1151 -or- (800) 390-1270
/ \/ \/ \/ |_______ http://www.nwlink.com
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 268435456 (262144K bytes)
avail memory = 257245184 (251216K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:1:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:1:1
vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 10 on pci0:9
mii[*mii*] address 00:60:08:0a:42:32
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:10
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "SEAGATE ST52160N 0285" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2069MB (4238282 512 byte sectors)
ahc0: target 1 Tagged Queuing Device
(ahc0:1:0): "SEAGATE ST34572W 0718" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 4340MB (8888924 512 byte sectors)
ahc0: target 2 Tagged Queuing Device
(ahc0:2:0): "SEAGATE ST34572W 0784" type 0 fixed SCSI 2
sd2(ahc0:2:0): Direct-Access 4340MB (8888924 512 byte sectors)
vga0 <VGA-compatible display device> rev 0 on pci0:11
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 8
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 7
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 6
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 5
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 4
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 3
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 2
ahc0: WARNING no command for scb 3 (cmdcmplt)
QOUTCNT == 1
pid 20622 (popper), uid 24188: exited on signal 8
pid 21039 (popper), uid 24188: exited on signal 8
sd1(ahc0:1:0): SCB 0x2 - timed out while idle, LASTPHASE == 0x1, SCSISIGI
== 0x0
SEQADDR = 0x6 SCSISEQ = 0x12 SSTAT0 = 0x5 SSTAT1 = 0xa
Ordered Tag queued
sd\M^?\^O:0): SCB 0x1 timedout while recovery in progress
sd1(ahc0:1:0): SCB 0x8 timedout while recovery in progress
sd1(ahc0:1:0): SCB 0x9 timedout while recovery in progress
sd1(ahc0:1:0): SCB 0x2 - timed out while idle, LASTPHASE == 0x1, SCSISIGI
== 0x0
SEQADDR = 0x5 SCSISEQ = 0x12 SSTAT0 = 0x27 SSTAT1 = 0xb
sd1(ahc0:1:0): Queueing an Abort SCB
sd1(ahc0:1:0): Abort Message Sent
sd1(ahc0:1:0): SCB 0x2 - timed out in message out phase, SCSISIGI == 0xa4
SEQADDR = 0xa1 SCSISEQ = 0x12 SSTAT0 = 0x5 SSTAT1 = 0x2
ahc0: Issued Channel A Bus Reset. 9 SCBs aborted
Clearing bus reset
Clearing 'in-reset' flag
sd1(ahc0:1:0): no longer in timeout
sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
sd0(ahc0:0:0): Power on, reset, or bus device reset occurred
, retries:3
sd2(ahc0:2:0): UNIT ATTENTION asc:29,2 field replaceable unit: 2
, retries:3
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6218 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 20131 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 29103 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 20131 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 29103 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 20131 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6218 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 29103 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 20131 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6218 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 29103 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
sd2(ahc0:2:0): SCB 0x4 - timed out while idle, LASTPHASE == 0x1, SCSISIGI
== 0x18
SEQADDR = 0x6 SCSISEQ = 0x5a SSTAT0 = 0x15 SSTAT1 = 0xa
Ordered Tag queued
Ordered Tag sent
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
sd2(ahc0:2:0): no longer in timeout
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 14233 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 6544 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 20131 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 29103 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 4854 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 20131 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 29103 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 4854 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 12247 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 12247 (sendmail), uid 0 on /var/spool/mqueue: file system full
pid 12247 (sendmail), uid 0 on /var/spool/mqueue: file system full
spec_getpages: I/O read error
vm_fault: pager input (probably hardware) error, PID 8988 failure
pid 8988 (tail), uid 1000: exited on signal 11 (core dumped)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.3.95.971110123347.28283K-100000>