Date: Fri, 20 Aug 1999 07:52:58 +0200 (SAST) From: Randy Bush <randy@psg.com> To: FreeBSD Laptoppers <freebsd-mobile@freebsd.org> Cc: Mark Murray <mark@grondar.za> Subject: wi0 nic problem Message-ID: <m11Hhbm-00000BC@cdsec.com>
index | next in thread | raw e-mail
3.2-release + PAO3-19990809.tar.gz
sony 505tx 128m
lucent pc24e-00-fc p/n 01q420/a wavelan ieee802.11
# Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
config default "wi0" any
insert logger -p Lucent WaveLAN/IEEE inserted
insert /etc/pccard_ether $device
remove logger -p Lucent WaveLAN/IEEE removed
remove /etc/pccard_ether_remove $device
Return IRQ=10
Card removed, slot 0
Slot 0, unfielded interrupt (0)
Aug 20 07:36:33 roam root: Etherlink III removed
Card inserted, slot 0
Aug 20 07:38:34 roam pccardd[58]: Card "Lucent Technologies"("WaveLAN/IEEE") [Ve
rsion 01.01] [] matched "Lucent Technologies" ("WaveLAN/IEEE") [(null)] [(null)]
card0: assign wi0 iobase 0x300 irq 10
wi0: <WaveLAN/IEEE 802.11> at 0x300-0x33f irq 10 on isa
wi0: Ethernet address: 00:60:1d:03:f3:fb
wi0: device timeout
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
#
# Sample Laptop Configuration
# for lenlen.ntc.keio.ac.jp (Toshiba Libretto 50CT)
# Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>
#
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
cpu "I586_CPU"
#cpu "I686_CPU"
ident ROAM
maxusers 64
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
#options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
#options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
#options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
# Soft updates is technique for improving file system speed and
# making abrupt shutdown less risky. It is not enabled by default due
# to copyright restraints on the code that implement it.
#
# Read .../../ufs/ffs/README.softupdates to learn what you need to
# do to enable this. ../../../contrib/sys/softupdates/README gives
# more details on how they actually work.
#
options SOFTUPDATES
# You may need to reset all pccards after resuming
options PCIC_RESUME_RESET
# Detach SCSI devices when the SCSI card is removed
#options SCSI_DETACH
# Detach ATAPI devices when the ATA card is removed
#options ATAPI_DETACH
# Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz
# band that US version uses. If you want to use Japanese version of
# WaveLAN, uncomment this line, or edit the corresponding config entry
# of /etc/pccard.conf.
#options "WAVELAN_PCMCIA_24"
# Suspend the system when the battery status is "Low"
#options "APM_BATT_LOW_SUSPEND"
# If you want to use NTP on laptop machines, uncomment the following
# option. Current APM implementation affects NTP client.
#options "APM_NO_CLOCK_ADJUST"
# PAO Enhanced PCI-PCIC support (experimental)
#options CB_TEST
#options FORCE_IRQ_ROUTING
config kernel root on wd0
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
controller isa0
#controller pnp0
#controller eisa0
controller pci0
# Dont remove these two lines!
pseudo-device card 1
# You must use "flags 0x1" when you don't hear any negotiation noise(?)
# if you use modem card, or pccardd doesn't read cis tuple, tell you
# 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's
# pcic is your PC.
#device pcic0 at isa? port 0x3e0 flags 0x1 irq 11
device pcic0 at isa? port 0x3e0 irq 11
#device pcic0 at isa? port 0x3e4 irq 11
#device pcic1 at isa? port 0x3e2 # for HiNote Ultra II
#device pcic1 at isa? port 0x3e4 # for Chandra II
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#options ATAPI_STATIC #Don't do it as an LKM
#device acd0 #IDE CD-ROM
#device wfd0 #IDE floppy (LS-120)
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller ncr0
#controller ahb0
#controller ahc0
#controller isp0
# This controller offers a number of configuration options, too many to
# document here - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
#controller dpt0
#controller adv0 at isa? port ? cam irq ?
#controller adw0
#controller bt0 at isa? port ? cam irq ?
#controller aha0 at isa? port ? cam irq ?
#controller scbus0
#device da0
#device sa0
#device pass0
#device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1
#device mcd0 at isa? port 0x300 bio irq 10
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
options MAXCONS=4 # number of virtual consoles
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device npx0 at isa? port IO_NPX irq 13
# pcm: Luigi's sound driver
device pcm1 at isa? port? tty irq 5 drq 1 flags 0x0 vector pcmintr
#
# Laptop support (see LINT for more options)
#
device apm0 at isa? # Advanced Power Management
device sio0 at isa? port "IO_COM1" tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
#device sio2 at isa? disable port "IO_COM3" tty irq 5
#device sio3 at isa? disable port "IO_COM4" tty irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 net irq 7
controller ppbus0
device lpt0 at ppbus?
#device plip0 at ppbus?
#device ppi0 at ppbus?
#controller vpo0 at ppbus?
#
# The following Ethernet NICs are all PCI devices.
#
#device ax0 # ASIX AX88140A
#device de0 # DEC/Intel DC21x4x (``Tulip'')
#device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
#device mx0 # Macronix 98713/98715/98725 (``PMAC'')
#device pn0 # Lite-On 82c168/82c169 (``PNIC'')
#device rl0 # RealTek 8129/8139
#device tl0 # Texas Instruments ThunderLAN
#device tx0 # SMC 9432TX (83c170 ``EPIC'')
#device vr0 # VIA Rhine, Rhine II
#device vx0 # 3Com 3c590, 3c595 (``Vortex'')
#device wb0 # Winbond W89C840F
#device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
#device ed1 at isa? disable port 0x300 net irq 10 iomem 0xd8000
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
device ep0 at isa? port 0x300 net irq 10
#device ep1 at isa? disable port 0x300 net irq 10
#device ex0 at isa? port? net irq?
#device fe0 at isa? port 0x300 net irq 10
#device fe1 at isa? disable port 0x300 net irq 10
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 net irq 10 drq 0
#device sn0 at isa? port 0x300 net irq 10
#device sn1 at isa? disable port 0x300 net irq 10
device wlp0 at isa? port 0x300 net irq 10
#device wlp1 at isa? disable port 0x300 net irq 11
#device cs0 at isa? disable port 0x300 net irq ?
#device cnw0 at isa? port 0x300 net irq 5
#device cnw1 at isa? disable port 0x300 net irq 5
#device ux0 at isa? port 0x300 net irq 5
device wi0
device xe0
# do not enable ze0 and zp0 (these devices are obsolete)
##device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000
##device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
# IBM Smart Capture PCMCIA card
#device scc0
#device scc1
# Hitachi microcomputer system Speach Synthesizer card
#device hss0
#device hss1
# PCMCIA Joystick
#device joy0 at isa? port "IO_GAME"
# PCMCIA GPIB card
#device gp0 at isa? port 0x2c0 tty
pseudo-device loop
pseudo-device ether
#pseudo-device sl 1
#pseudo-device ppp 1
pseudo-device vn 1
pseudo-device tun 2
pseudo-device pty 16
#pseudo-device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
#options KTRACE #kernel tracing
# This provides support for System V shared memory and message queues.
#
options SYSVSHM
options SYSVSEM
options SYSVMSG
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be
# aware of the legal and administrative consequences of enabling this
# option. The number of devices determines the maximum number of
# simultaneous BPF clients programs runnable.
pseudo-device bpfilter 4 #Berkeley packet filter
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #0: Fri Aug 20 10:13:20 SAST 1999
root@roam.psg.com:/usr/src/sys/compile/ROAM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (298.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (131072K bytes)
avail memory = 127770624 (124776K bytes)
Preloaded elf kernel "kernel" at 0xc02a0000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <NeoMagic NM2160 laptop SVGA controller> rev 0x01 int a irq 9 on pci0.8.0
pcic0: <Ricoh RL5C475 PCI-CardBus Brige> rev 0x00 int a irq 0 on pci0.10.0
RL5C4XX PCI Config Reg: [CSC isa irq]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <4 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
pcm1 at 0x220 irq 5 drq 1 on isa
ESS1879 (rev 11, native mode)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK6412MAT>
wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ep0 not found at 0x300
wlp0 not found at 0x300
pcic0 at 0x3e0-0x3e1 irq 11 on isa
PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
Initializing PC-card drivers: ep wi wlp xe sio wdc
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s2a
Card inserted, slot 0
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
cmd ntpd pid 116 tried to use non-present sched_get_priority_min
cmd ntpd pid 116 tried to use non-present sched_setscheduler
card0: assign ep0 iobase 0x300 irq 10
ep0: utp/bnc[*UTP*] address 00:a0:24:ac:89:33
ep0: unload
Return IRQ=10
Card removed, slot 0
Slot 0, unfielded interrupt (0)
Card inserted, slot 0
card0: assign wi0 iobase 0x300 irq 10
wi0: <WaveLAN/IEEE 802.11> at 0x300-0x33f irq 10 on isa
wi0: Ethernet address: 00:60:1d:03:f3:fb
wi0: device timeout
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: xmit failed
wi0: device timeout
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
roam.psg.com:/usr/home/randy/Mail> pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 01 f7
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 2Kb, 1 units
Device number 2, type Reserved, WPS = OFF
, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 68 52 08 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = ON
Speed = No speed, Memory block size = 8Kb, 11 units
Device number 2, type No device, WPS = ON
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x1e (Geometry info for common memory), length = 236
000: 04 40 5a 08 ff 15 50 05 00 4c 75 63 65 6e 74 20
010: 54 65 63 68 6e 6f 6c 6f 67 69 65 73 00 57 61 76
020: 65 4c 41 4e 2f 49 45 45 45 00 56 65 72 73 69 6f
030: 6e 20 30 31 2e 30 31 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
050: 00 00 00 00 00 00 ff 20 04 56 01 02 00 21 02 06
060: 00 22 02 01 07 22 05 02 40 42 0f 00 22 05 02 80
070: 84 1e 00 22 02 03 07 22 08 04 06 00 60 1d 03 f3
080: fb 22 02 05 01 1a 07 03 01 e0 03 00 00 01 1b 0f
090: c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff ff
0a0: 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0d0: ff ff ff ff ff ff ff ff ff ff ff ff 00 fa ff ff
0e0: ff ff ff ff ff ff ff ff ff ff ff ff
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
width = 4, erase = 0x80000000, read = 0x2000000, write = 0x80
partition = 0x40000000, interleave = 0x100000
Tuple #4, code = 0xff (Terminator), length = 0
1 slots found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m11Hhbm-00000BC>